CMT – Canadian Woodworker

CMT 7-Bushing Template Guide Kit

Mike Fondse — Thu, 27 Nov 2025 17:36:23 +0000

A practical 7-bushing kit that will extend the possibilities of your router. For template-controlled operations such as dovetailing, stair routing, hinge butt routing, lock face routing and more general template tasks.

These template guides can be used with any router featuring a 30mm (1-3-/16”) bore baseplate.
Fits the most popular routers. Some routers require CMT’s base899.000.02

CMT Solid Carbide Insert Knife, 36mm x 12mm x 1.5mm for V-Groove Bit

Mike Fondse — Wed, 09 Jul 2025 20:12:51 +0000

CMT Solid Carbide Insert Knife, 36mm x 12mm x 1.5mm for 663.101.11 V-Groove Router Bit

Priced Individually
Must be ordered in quantities of 10

CMT Carbide Insert Knife, Diamond Shape, For V-Groove Signmaking Router Bit

Mike Fondse — Wed, 02 Jul 2025 20:33:06 +0000

CMT Carbide Insert Knife, Diamond Shape, For V-Groove Signmaking Router Bit

Solid Carbide Knives (2/30°) 28x14x2mm
Priced Individually
Must be purchased in quantities of 10

CMT 35° Laser Point Router Bit

Mike Fondse — Tue, 10 Jun 2025 17:54:21 +0000

This bit crafts delicate grooves and incisions with laser precision. Make one-of-a-kind effects with 35° bevel edges in one single run. Equipped with three super sharp cutting edges, this perfectly balanced bit allows you to work with incredible accuracy with no risk of burning.

Raise the bit and produce a delicate fine point incision, or work the whole 12,7mm diameter to render bold highlighted lettering.
Super strong steel shank and micrograin carbide cutting edges guarantee long lasting performance.

1/4″ Diameter
25/64″ Cutting Length
35 Degree Cutting Angle
2″ Total Length
1/4″ Shank

CMT 8″ x 12T Locked Dado Pro Set

Mike Fondse — Thu, 03 Apr 2025 14:55:03 +0000

CMT is proud to introduce a brand new LOCKED DADO PRO Set unlike any other!

This is the very first Dado ever deemed UNI EN847 compliant. This means that while the Dado is rotating, the assembled elements will never come into contact with each other! This is possible thanks to unique blade body design and ‘never before seen’ special “lock spacers”.

Features:

For flat bottom grooves & virtually splinter-free cuts in solid wood, laminates & melamines, veneer plywood
Orange Shield Coating protect from heat, gumming and corrosion
Includes shims (plastic & magnetic) and plastic ‘‘lock spacers’’ set for micro-thin adjustability
Compatible with most stationary table saws including SawStop
Easy pre-assembly out of machine. Once stacked, no alignment necessary
Cutting teeth/assembled elements never come in contact with each other, even when brake safety system kicks in
For flat bottom grooves and virtually splinter-free cuts

CMT Carbide Hinge Drill RH 20mm x 70mm

Mike Fondse — Fri, 31 Jan 2025 14:54:49 +0000

Ideal for hinges.

Use on boring machines equipped with adaptors or chucks. Use for drilling accurate and clean-cut blind holes in solid wood, wood composites, plastic and laminated materials.

New construction with 1mm centre point.

CMT 210mm X 24T X 30mm Bore Carbide Festool Track Saw Blade

Mike Fondse — Fri, 31 Jan 2025 14:54:26 +0000

These carbide saw blades made by CMT of Italy are directly compatible with Festool Track Saws as replacement blades. CMT manufactures extremely high quality tooling and saw blades in their CNC automated factories and these blades are no exception. We stock two blades in 160mm and three blades in 210mm to fit the two sizes of track saws made by Festool. The quality of these blades is unrivaled but still at a fair value. The following blades are available in stock while others are available special order.

291.160.24H – 160mm x 24 Tooth x 20mm Bore?For Rip/Crosscutting Soft/Hard Woods and Plywood
292.160.40H – 160mm x 40 Tooth x 20mm Bore?For Finer Cutting Soft/Hard Woods and Plywood
290.210.24M – 210mm x 24 Tooth x 30mm Bore?For Faster Rip/Crosscutting Soft/Hard Woods and Plywood
291.210.36M – 210mm x 36 Tooth x 30mm Bore?For Rip/Crosscutting Soft/Hard Woods and Plywood
292.210.48M – 210mm x 24 Tooth x 30mm Bore? For Finer Cutting Soft/Hard Woods and Plywood

Festool 260mm X 80 Tooth Carbide Blade By CMT For Kapex Miter Saw

Mike Fondse — Fri, 31 Jan 2025 14:54:26 +0000

This special blade by CMT in Italy is for use on the Festool Kapex Miter Saw. It features a 260mm diameter with 30mm bore, a 2.5mm kerf tooth width and 80 teeth with ATB grind. This is an excellent blade for fine trim work.

CMT ITK-Plus V-Drive Finish 7-1/4″X T40

Mike Fondse — Fri, 31 Jan 2025 14:54:26 +0000

For framing/decking and general construction. Faster cuts thanks to special V-DRIVE teeth.

Machines: corded and cordless circular saws
Material: wood with nails, lumber, plywood, OSB sheets

CMT Carbide 4 Flute Dowel Drill RH 10mm x 70mm

Mike Fondse — Fri, 31 Jan 2025 14:54:26 +0000

Used on boring machines equipped with adaptors or chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.

Super-strength steel.
Cutter portion coated with black or orange P.T.F.E.
HW head with precision balanced centre point.
2 HW precision ground cutting edges (Z2).
2 negatively ground spurs (V2).
4 spiral flutes.
Parallel shank with driving flat and length adjusting screw.