You will find our machines to have more cast iron, better cutters, easier adjustments, longer tables and superior quality to all competitors.

The Scorpion CWI-J400HC is an extremely heavy built 16” wide long bed jointer for demanding educational or industrial customers looking for big performance and exceptional quality.

The J400 comes with a huge heavy duty cast iron base and a massive 97.5” x 16” machined cast iron bed which is one of the longest in the industry and is easily adjustable for flatness by the very accurate easy to adjust parallelogram tables.

The parallelogram table adjustment keeps the tables at optimum distance and support to the cutter head. When using a jointer, having the longest table length possible is preferred to help when machining longer boards to give more work piece support and less chance of “cupping” or curving the long boards.

Other than the table length one of the most impressive features of the Scorpion jointers is the front facing hand wheels for the adjustment of the table heights on both infeed and outfeed tables.

Most jointers use hand wheels or levers located underneath the tables which can be awkward to reach or difficult to adjust. The Scorpion hand wheels are easily reached at the front of the machine and allow for precise adjustments of the bed heights.

The Scorpion CWI-J400HC is a very heavy duty industrial machine capable of any task a user will need in their jointer.

Specifications:

• Stinger 8 Row Carbide Helical Cutter Head
• Knife Size 15mm x 15mm x 2.5mm (Total of 128 Knives)
• Parallelogram Cast Iron Table and Cutting Height Adjustment
• Easy Adjust Front Facing Hand wheels
• Heavy Duty Cast Iron Fence Assembly
• Rack & Pinion Fence Width Adjustment
• Table size 16″ x 97.5″
• Table height 31.5″
• Maximum cutting width 16″
• Maximum cutting depth 3/4″
• Motor 5 HP, 230V 1-Phase (CWI-J400HC-M1) or 7.5 HP 3-Phase (CWI-J400HC-M2)
• Above Table On/Off Switch Control with Power On Light
• Magnetic Safety Switch w/Overload Protection
• Cutter head speed 5000 rpm
• Euro Style Swing Away Guard
• Heavy Cast Iron BaseFloor Space 97.5″ x 45″ x 42”
• Net Weight 1254 lbs
• Shipping Crate Size 106″ x 35.5″ x 40″ (2700mm x 900mm x 1020mm)
• Shipping Weight 1386 lbs (630 kg)

The CWI-P0721HC is built for educational and commercial users looking for a machine with big capacities and great features and can be purchased in single phase or three phase power. The P0721HC offers a 7.5 HP main motor which drives a 4.75” diameter Stinger Carbide helical cutter head to machine lumber at up to 1/4” at each pass. The Stinger carbide helical cutter head has 8 rows of 15mm x 15mm x 2.5mm square four sided convex edge carbide knives for a total of 169 knives. When an edge of a knife gets dull or damaged simply remove the locking screw and rotate the knife to a new edge. We find under normal wear and tear customers will get one to two years of performance from each edge of knife. The top lid of the machine is hinged to easily lift up and out of the way to maintain knives or make adjustments to the rollers and is covered by a protective carpet.

The 8 rows of knives provide more knife cuts per inch, better overlap of the knives for less knife marks in the wood and virtually zero tear out even on the most difficult to thickness woods. Our Stinger Carbide helical cutter heads are renowned for ease of maintenance, quality of cut, and sound levels so pleasant you almost forget the machine is running.

To feed the wood through the machine the Scorpion P0721HC has a 3/4 HP feed motor with a variable speed inverter with digital readout. Simply dial in the speed you need from 13 FPM for slow fine cuts or ramp it up to 52 FPM for high production work. The P0721HC planer has a sectional infeed roller system to ensure a very good grip and a dual outfeed roller set up to almost eliminate sniping issues. That’s right….two steel outfeed rollers for excellent work piece support …not just one like most competitors. For added safety anti-kickback fingers are present in front of the feed rollers.

The sectional infeed roller is very importantly for safety reasons as well as a vast increase in production capabilities over a standard one piece infeed roller. Each individual section of the infeed roller adjusts for different thicknesses of wood ensuring a firm grip on each piece of wood. This allows users to put multiple boards through the machine at a time. Traditional solid steel or rubber infeed rollers will lift to the thickness of the thicker board allowing the danger of the thinner board to be ruined or worse…thrown right out of the machine.

The Scorpion precision ground cast iron table is 21” x 39.25” of surface area which is supported by four height adjustment pillars.  On the surface of the table are two adjustable table rollers to help the feeding of rough lumber. A simple hand lever adjustment is used to set the appropriate height of the rollers.

The table is operated by a push button control panel to electronically position the cast iron table to thickness boards from 5mm to 300mm (12”) thick by a ½ HP motor. Simply enter the desired height in imperial or metric measurement or press the up/down buttons to reach your desired setting.

The electrical control cabinet uses very high quality components which are CSA certified for use in schools and Canadian commercial operations. The Scorpion CWI-P0721HC 21” thickness planer is a machine built to be a work horse in any commercial environment for years of high production needs.

Specifications:

• 7.5 HP Main Motor 220/1/60 (Optional 220/3/60 M2 Model)
• 3/4 HP Feed Motor w/inverter
• Variable Feed Speed 13 to 52ft per min
• Powered Table Elevation w/Digital Position Controller
• Digital Read Out in both Metric and Imperial
• Sectional Infeed Roller
• Anti-Kick Back Fingers
• 530MM x 1000MM Precision Ground Table
• Dual Table Rollers
• Two Steel Outfeed Rollers for Excellent Pulling Power
• Thickness Capacity of 5mm to 300mm
• Hinged Machine Hood with Protective Carpet
• Dust Hood 6”
• Floor Space 39.5” x 48” x 45.25”
• Net Weight 1201 lbs
• Shipping Size 45.25” x 44” x 51.5”
• Shipping Weight 1445 lbs
• CSA Certified

The CWI-P0721HC is built for educational and commercial users looking for a machine with big capacities and great features and can be purchased in single phase or three phase power. The P0721HC offers a 7.5 HP main motor which drives a 4.75” diameter Stinger Carbide helical cutter head to machine lumber at up to 1/4” at each pass. The Stinger carbide helical cutter head has 8 rows of 15mm x 15mm x 2.5mm square four sided convex edge carbide knives for a total of 169 knives. When an edge of a knife gets dull or damaged simply remove the locking screw and rotate the knife to a new edge. We find under normal wear and tear customers will get one to two years of performance from each edge of knife. The top lid of the machine is hinged to easily lift up and out of the way to maintain knives or make adjustments to the rollers and is covered by a protective carpet.

The 8 rows of knives provide more knife cuts per inch, better overlap of the knives for less knife marks in the wood and virtually zero tear out even on the most difficult to thickness woods. Our Stinger Carbide helical cutter heads are renowned for ease of maintenance, quality of cut, and sound levels so pleasant you almost forget the machine is running.

To feed the wood through the machine the Scorpion P0721HC has a 3/4 HP feed motor with a variable speed inverter with digital readout. Simply dial in the speed you need from 13 FPM for slow fine cuts or ramp it up to 52 FPM for high production work. The P0721HC planer has a sectional infeed roller system to ensure a very good grip and a dual outfeed roller set up to almost eliminate sniping issues. That’s right….two steel outfeed rollers for excellent work piece support …not just one like most competitors. For added safety anti-kickback fingers are present in front of the feed rollers.

The sectional infeed roller is very importantly for safety reasons as well as a vast increase in production capabilities over a standard one piece infeed roller. Each individual section of the infeed roller adjusts for different thicknesses of wood ensuring a firm grip on each piece of wood. This allows users to put multiple boards through the machine at a time. Traditional solid steel or rubber infeed rollers will lift to the thickness of the thicker board allowing the danger of the thinner board to be ruined or worse…thrown right out of the machine.

The Scorpion precision ground cast iron table is 21” x 39.25” of surface area which is supported by four height adjustment pillars.  On the surface of the table are two adjustable table rollers to help the feeding of rough lumber. A simple hand lever adjustment is used to set the appropriate height of the rollers.

The table is operated by a push button control panel to electronically position the cast iron table to thickness boards from 5mm to 300mm (12”) thick by a ½ HP motor. Simply enter the desired height in imperial or metric measurement or press the up/down buttons to reach your desired setting.

The electrical control cabinet uses very high quality components which are CSA certified for use in schools and Canadian commercial operations. The Scorpion CWI-P0721HC 21” thickness planer is a machine built to be a work horse in any commercial environment for years of high production needs.

Specifications:

• 7.5 HP Main Motor 220/3/60 (Optional 220/1/60 M1 Model)
• 3/4 HP Feed Motor w/inverter
• Variable Feed Speed 13 to 52ft per min
• Powered Table Elevation w/Digital Position Controller
• Digital Read Out in both Metric and Imperial
• Sectional Infeed Roller
• Anti-Kick Back Fingers
• 530MM x 1000MM Precision Ground Table
• Dual Table Rollers
• Two Steel Outfeed Rollers for Excellent Pulling Power
• Thickness Capacity of 5mm to 300mm
• Hinged Machine Hood with Protective Carpet
• Dust Hood 6”
• Floor Space 39.5” x 48” x 45.25”
• Net Weight 1201 lbs
• Shipping Size 45.25” x 44” x 51.5”
• Shipping Weight 1445 lbs
• CSA Certified

The Scorpion CWI-J275HC is our extreme duty, parallelogram design, 8″ helical jointer which offers amazing features and performance. This helical jointer features superior cutting performance thanks to our Stinger 5 row carbide helical cutter head. The Stinger heavy duty 3 1/8” diameter cutter head has 40 four-sided convex edge carbide knives set on a shear angle. The 5 rows of knives provide more knife cuts per inch, better overlap of the knives for less knife marks in the wood and virtually zero tear out even on the most difficult to joint woods.

Specifically designed for demanding environments like educational or industrial customers, this model provides big performance and exceptional quality. The J275HC comes with a huge heavy duty enclosed welded steel stand with a 4″ diameter dust inlet to help move high amounts of wood chips. We are really pleased to also include our lever style mobility kit, making moving the machine around the work shop a simple task. The massive 83” x 8” machined cast iron bed is one of the longest in the industry and is easily adjustable for flatness by the very accurate, easy to adjust parallelogram tables. The parallelogram table adjustment keeps the tables at optimum distance and support to the cutter head. When using a jointer, having the longest table length possible is preferred to help when machining longer boards, to give more work piece support and less chance of “cupping” or curving the long boards.

Truly unique on this Scorpion jointer is the front facing hand wheels for the adjustment of both infeed and outfeed tables. This user-friendly feature allows for precise changes of table heights with simplicity and greater accuracy. To also assist with height changes the J275HC comes with an electronic digital read out which can read in metric or imperial measurements at the push of a button. The J275HC has a very powerful 3 HP (15 amp on 220 volt) single phase motor (or can be configured with a 5 HP 3-phase motor) and a magnetic safety switch with overload and under voltage protection. Included on the electrical panel, along with the digital height read out, is the push button on/off switch as well as a mushroom style safety emergency disconnect switch .

The robust cast iron machined fence is almost 4 5/8” tall and 38” long for excellent work piece support as it travels the length of the jointer bed. The fence has set stops at 90 degrees and 45 degrees and as well can be set anywhere in between for angle work. The fence easily slides in and out on the table with simple controls utilizing a rack and pinion style handwheel adjustment. Also unique to the J275HC is the Euro style cutter head guard which is safer and easier to use than the old “pork chop” style spring loaded guards.

This Scorpion jointer is sure to be a fantastic addition to your workshop.

Specifications:

• Heavy Duty Stinger 3 1/8″ Dia. Carbide Helical Cutter Head
• Number of Carbide knives 40
• Knife Size 15mm x 15mm x 2.5mm
• Cutter head speed 5500 rpm
• Parallelogram Table
• Easy Adjust Front Facing Hand wheels
• Heavy-Duty Cast-Iron Fence Assembly
• Fence stops at 90 and 45 degrees
• Electronic Digital Table Height
• Euro Style Cutterhead Guard
• Table size 8″ x 83″
• Table height 31.5″
• Maximum cutting width 8″
• Maximum cutting depth 1/8″
• Cast Iron Fence size 4 5/8″ x 38″
• Motor 3 HP, 230V, 15 Amp (Optional 5 HP 3-Phase Motor – CWI-J275HC-M2)
• Emergency Mushroom Stop Button
• Magnetic Safety Switch w/Overload Protection
• Separate On/Off Buttons
• Included Mobility Kit
• Dust Collection Chute with 4” Port
• Floor Space 83″ x 36″ x 36”
• Net Weight 539 lbs
• Shipping Size 88″ x 28″ x 55″
• Shipping Weight 627 lbs (285 kg)

The Scorpion CWI-J326HC is our latest design of our 12″ helical jointer which offers amazing features and performance, including the superior cutting performance of our Stinger 8 row carbide helical cutter head. The Stinger heavy duty 3 7/8” cutter head has 96 four-sided convex edge carbide knives set on a shear angle. The 8 rows of knives provide more knife cuts per inch, better overlap of the knives for less knife marks in the wood and virtually zero tear out even on the most difficult to joint woods.

The J326HC comes with a huge heavy duty enclosed welded steel stand with a large 6″ diameter dust inlet to help move high amounts of wood chips. We are really pleased to also include our lever style mobility kit, making moving the machine around the work shop a simple task. The massive 88” x 12” machined cast iron bed is one of the longest in the industry and is easily adjustable for flatness by the very accurate, easy to adjust parallelogram tables. The parallelogram table adjustment keeps the tables at optimum distance and support to the cutter head. When using a jointer, having the longest table length possible is preferred to help when machining longer boards, to give more work piece support and less chance of “cupping” or curving the long boards.

Truly unique on this Scorpion jointer is the front facing hand wheels for the adjustment of both infeed and outfeed tables. This user-friendly feature allows for precise changes of table heights with simplicity and greater accuracy. To also assist with height changes the J326HC comes with an electronic digital read out which can read in metric or imperial measurements at the push of a button. The CWI-J326HC-M1 has a very powerful 5 HP (23 amp on 220 volt) single phase motor (also available with a 7.5 HP 3-Phase motor, CWI-J326HC-M2) and a magnetic safety switch with overload and under voltage protection. Included on the electrical panel, along with the digital height read out, is the push button on/off switch as well as a mushroom style safety emergency disconnect switch.

The robust cast iron machined fence is almost 5 7/8” tall (150mm) and an amazing 47.25” long (1200mm) for excellent work piece support as it travels the length of the jointer bed. The fence has set stops at 90 degrees and 45 degrees and as well can be set anywhere in between for angle work. Also unique to the J326HC is the Euro style cutter head guard which is safer and easier to use than the old “pork chop” style spring loaded guards. The fence easily slides in and out on the table with simple controls.

This Scorpion jointer is sure to be a fantastic addition to your workshop.

Specifications:

• Heavy Duty Stinger 3 7/8″ Dia. Carbide Helical Cutter Head
• Number of Carbide knives 96
• Knife Size 15mm x 15mm x 2.5mm
• Cutter head speed 5500 rpm
• Parallelogram Table
• Easy Adjust Front Facing Hand wheels
• Heavy-Duty Cast-Iron Fence Assembly
• Fence stops at 90 and 45 degrees
• Electronic Digital Table Height
• Euro Style Cutterhead Guard
• Table size 12″ x 88″
• Table height 34.5″
• Maximum cutting width 12″
• Maximum cutting depth 1/8″
• Cast Iron Fence size 5 7/8″ x 47 1/4″
• Motor 5 HP, 230V, 23 Amp (also available with a 7.5 HP 3-Phase motor, CWI-J326HC-M2)
• Emergency Mushroom Stop Button
• Magnetic Safety Switch w/Overload Protection
• Separate On/Off Buttons
• Included Mobility Kit
• Dust Collection Chute with 6” Port
• Floor Space 88″ x 41″ x 48”
• Net Weight 825 lbs
• Shipping Crate Size 91″ x 33.5″ x 49″
• Shipping Weight 1076 lbs (489 kg)

The new Scorpion CWI-J125HC is our newest design 6″ dovetail design long bed jointer which includes the superior cutting performance of the Stinger 5 row carbide helical cutter head. The Stinger heavy duty 2.5” diameter cutter head has 30 four-sided convex edge carbide knives set on a shear angle. The 5 rows of knives provide more knife cuts per inch, better overlap of the knives for less knife marks in the wood and virtually zero tear out even on the most difficult to joint woods.

The J125HC comes with a heavy duty enclosed, welded steel stand, with our lever style wheeled mobility kit to make movement around the shop a breeze. The 55” x 7.25” machined cast iron bed is one of the longest in the industry and is easily adjustable for flatness by the machined dovetail ways and locking adjustment screws. When using a jointer, having the longest table length possible is preferred to help when machining longer boards to give more work piece support and less chance of “cupping” or curving the long boards.

Other than the table length one of the most impressive features of the Scorpion jointers is the front facing hand wheels for simple and easy adjustment of the table heights on both infeed and outfeed tables. The Scorpion hand wheels are easily reached at the front of the machine and allow for precise adjustments of the bed heights. There is also a set stop at 1/8” depth of cut but simply pull the stop pin to adjust the table height for up to ½” of cut.

The robust cast iron machined fence is 4” tall and an amazing 32” long for excellent work piece support as it travels the length of the jointer bed. The fence has set stops at 135 degrees, 90 degrees and 45 degrees and as well can be set anywhere in between for angle work. It is supported by a massive cast iron fence mechanism to allow accurate and simple adjustments for both angles and width of cut. The J125HC has a powerful 14 amp (7 amp on 220 volt) 1 HP single phase motor and a magnetic safety switch with overload and under voltage protection. Included on the electrical panel, is the push button on/off switch as well as a mushroom style safety emergency disconnect switch. Also unique to the J125HC is the Euro style cutter head guard which is safer and easier to use than the old “pork chop” style spring loaded guards.

This Scorpion jointer is sure to be a fantastic addition to your workshop.

Specifications:

• Euro Style Cutter Head Guard
• Lever Style Mobility Kit
• Stinger 5 Row Carbide helical Cutter head
• Easy Adjust Front Facing Hand wheels
• Heavy-Duty Cast-Iron Fence Assembly
• Fence stops at 135, 90 and 45 degrees
• Table size 7 1/4″ x 55″
• Table height 30.5″
• Maximum cutting width 6″
• Maximum cutting depth 1/2″
• Rabbeting capacity 1/2″
• Cast Iron Fence size 4″ x 32″
• Motor 1 HP, 115/230 V, 14/7 A
• Magnetic Start/Stop Switch
• Mushroom Style Emergency Disconnect
• Cutter head speed 6000 rpm
• Number of Carbide knives 30
• Knife Size 15mm x 15mm x 2.5mm
• Welded Steel Stand
• Dust Collection Chute with 4” Port
• Floor Space 55″ x 20″ x 35”
• Net Weight 210 lbs
• Shipping Size 150cm x 69cm x 120cm (59″ x 27″ x 47″)
• Shipping Weight 161.5 kg (356 lbs)

The CWI-P1025HC is built for educational and commercial users looking for a big machine with big capacities and many nice features. The P1025HC has a 10 HP 220/3/60 main motor which drives a 4.75” diameter Stinger Carbide helical cutter head to machine lumber at up to 1/4” at each pass. The Stinger carbide helical cutter head has 8 rows of 15mm x 15mm x 2.5mm square four sided convex edge carbide knives for a total of 204 knives. When an edge of a knife gets dull or damaged simply remove the locking screw and rotate the knife to a new edge. We find under normal wear and tear customers will get one to two years of performance from each edge of knife. The top lid of the machine is hinged to easily lift up and out of the way to maintain knives or make adjustments to the rollers and is covered by a protective carpet.

The 8 rows of knives provide more knife cuts per inch, better overlap of the knives for less knife marks in the wood and virtually zero tear out even on the most difficult to thickness woods.

Our Stinger Carbide helical cutter heads are renowned for ease of maintenance, quality of cut, and sound levels so pleasant you almost forget the machine is running.

To feed the wood through the machine the Scorpion P1025HC has a 1 HP feed motor with a variable speed inverter with digital readout. Simply dial in the speed you need from 13 FPM for slow fine cuts or ramp it up to 52 FPM for high production work. The P1025HC planer has a sectional infeed roller system to ensure a very good grip and a dual outfeed roller set up to almost eliminate sniping issues. That’s right….two steel outfeed rollers for excellent work piece support …not just one like most competitors. For added safety anti-kickback fingers are present in front of the feed rollers.

The sectional infeed roller is very importantly for safety reasons as well as a vast increase in production capabilities over a standard one piece infeed roller. Each individual section of the infeed roller adjusts for different thicknesses of wood ensuring a firm grip on each piece of wood. This allows users to put multiple boards through the machine at a time. Traditional solid steel or rubber infeed rollers will lift to the thickness of the thicker board allowing the danger of the thinner board to be ruined or worse…thrown right out of the machine.

The Scorpion precision ground cast iron table is 25” x 41.5” of surface area which is supported by four height adjustment pillars. On the surface of the table are two adjustable table rollers to help the feeding of rough lumber. A simple hand lever adjustment is used to set the appropriate height of the rollers.

The table is operated by a push button control panel to electronically position the cast iron table to thickness boards from 5mm to 300mm (12”) thick by a ½ HP motor. Simply enter the desired height in imperial or metric measurement or press the up/down buttons to reach your desired setting. The digital read out will show feed speed as well as thickness settings.

The electrical control cabinet uses very high quality components which are CSA certified for use in schools and Canadian commercial operations. The Scorpion CWI-P1025HC 25” thickness planer is a machine built to be a work horse in any commercial environment for years of high production needs.

Specifications:

• 10 HP Main Motor 220/3/60
• 1 HP Feed Motor w/inverter
• Variable Feed Speed 13 to 52ft per min
• Powered Table Elevation w/Digital Position Controller
• Digital Read Out in both Metric and Imperial
• Sectional Infeed Roller for Safety and high production
• Anti-Kick Back Fingers
• Stinger 8 Row Carbide Helical Cutter Head 4.75” dia
• 15mm x 15mm x 2.5mm carbide Knives (204 in Total)
• 25” x 41.5” Precision Ground Table
• Dual Table Rollers
• Two Steel Outfeed Rollers for Excellent Pulling Power
• Thickness Capacity of 5mm to 300mm
• Hinged Machine Hood with Protective Carpet
• Dust Hood 6”
• Floor Space 47.25” x 48” x 45.25”
• Net Weight 1837 lbs
• Shipping Size 45.5” x 48” x 51.5”
• Shipping Weight 1958 lbs
• CSA Certified

Scorpion jointers, thickness planers and combination machines are built by CWI Woodworking Technologies to be best in class machinery with the features, performance and quality that serious woodworkers are looking for whether in the hobby, educational or industrial woodworking industries. You will find our machines to have more cast iron, better cutters, easier adjustments, longer tables and superior quality to all competitors.

The Scorpion CWI-JP1203HC 12” helical jointer/planer combination machine is literally two machines in one. This is a European design of machinery built for challenged shop space size and convenience of operation. Having both a 12” wide jointer and a 12” thickness planer in the same foot print really has its advantages. In North America it is very common to see 6” and 8” jointers in many workshops but in Europe they are virtually nonexistent. In Europe it is far more common to see 12” and larger combination machines for the jointing and thicknessing operations in their shops.

The primary advantage of two machines in one is space but also it is nice to have that ability to “joint” the face of the wood prior to thicknessing. Having a 12” or larger jointer surface is an advantage over only being able to edge joint on a small 6” or 8” jointer surface. The JP1203HC has a 3 HP 220/1/60 motor which drives a 2 7/8”” diameter Stinger Carbide helical cutter head to machine lumber at up to 1/8” at each pass.

The Stinger carbide helical cutter head has 5 rows of 15mm x 15mm x 2.5mm square four sided convex edge carbide knives for a total of 60 knives. When an edge of a knife gets dull or damaged simply remove the locking screw and rotate the knife to a new edge. We find under normal wear and tear customers will get one to two years of performance from each edge of knife. The 5 rows of knives provide more knife cuts per inch, better overlap of the knives for less knife marks in the wood and virtually zero tear out even on the most difficult to thickness woods. Our Stinger Carbide helical cutter heads are renowned for ease of maintenance, quality of cut, and sound levels so pleasant you almost forget the machine is running.

The CWI-JP1203HC features and impressive 12” x 52 ¾” long heavily ribbed cast iron jointer table for excellent support with longer boards. Both the parallelogram infeed and outfeed jointer tables are independently adjustable for height using easy access levers on the front of the machine. There are two lever table locks to ensure the tables do not move once set to position. The front table adjusts for thickness of cut and the back table adjusts for accuracy to the cutter head height. The cast iron thickness planer table is 12” x 24” with a support roller for added workpiece support. The planer table is adjusted for height from 1/8” to an amazing 8 ¾” thickness capacity by use of a large hand wheel and a digital readout for accurate settings.

The changeover from Jointer to planer is really very simple and takes no time at all. Simply release the table security locks at each side of the cabinet under the table and raise the jointer surface in one move as both infeed and outfeed tables lift together. Then simply flip the dust collection hood over from jointer mode to thickness planer mode and you are ready to go. The other nice feature is because both tables lift at the same time the fence assembly does not have to be moved or removed. It simply remains in place. The heavy profile aluminum fence is 6” tall and an amazing 43” long for excellent work piece support as it travels the length of the jointer bed. The fence securely locks in any position for angle work as well.

New Features:

Since 2019 the Scorpion jointer planers in both 12” and 16” have been outfitted with a number of new user friendly features truly making these extraordinary machines even better. First we have gone away from the traditional box type magnetic switch that sticks out of the front of many woodworking machines and gone to a new Euro machine body style with a flush mount electrical panel. This panel includes an on/off magnetic switch with overload and under voltage protection as well as a separate emergency mushroom stop button. Also on the panel is a new electronic digital height read out for the thickness planer tables. This makes it much easier to calibrate the machines height without bending around under the machine. Also the flush mount panel stops those uncomfortable knee bangs that used to happen when walking past the old magnetic box switch.

Another new feature is the Euro style guard now has a lever to unlock so users can easily swing the guard out of the way when performing certain cuts or maintenance on the cutterhead. The last really important feature we have been asked for is a mobility kit. Both models now come standard with 4” diameter rubber wheels attached to one side of the machine and a separate large wheeled handle that slips under the other side of the machine to allow the user to lift and steer the machine around his shop when space is needed. The machine sits normally on its frame for secure rigid footing and only engages the wheels when the handle is used.

Specifications:

• Easy and Quick Changeover from Jointer to Planer
• Both Jointer Tables Lift Together
• Front Facing Table Adjust Levers and Locks
• Swing Away Euro Blade Guard
• Easy Use Mobility Kit Included
• Electronic Digital Height Read Out for Planer Table
• Heavy Duty Aluminum Fence Assembly 6” x 43”
• Secure Fence Locks for Angle Work
• Jointer Table size 16″ x 65.5″
• Planer Table size 16” x 24”
• Maximum cutting width 16″
• Maximum cutting depth 1/8″
• Motor 4 HP 13 amp 220 volt
• Flush Mount Electrical Panel
• Cutter head speed 5500 rpm
• Feed Speed 23 ft/min
• Stinger 5 Row Carbide helical Cutter head 2 7/8” dia
• Number of Carbide knives 80
• Knife Size 15mm x 15mm x 2.5mm
• Dust Collection Chute with 4” Port
• Machine Weight 572 lbs
• Shipping Size 66″ x 27.5″ x 38.5″
• Shipping Weight 660 lbs (300 kg)

Scorpion jointers, thickness planers and combination machines are built by CWI Woodworking Technologies to be best in class machinery with the features, performance and quality that serious woodworkers are looking for whether in the hobby, educational or industrial woodworking industries. You will find our machines to have more cast iron, better cutters, easier adjustments, longer tables and superior quality to all competitors.

The Scorpion CWI-JP1604HC 16” helical jointer/planer combination machine is the big brother to the CWI-JP1203HC and like its sibling it is two machines in one but in a heavier frame with more power and larger capacity. This is a European design of machinery built for challenged shop space size and convenience of operation. Having both a 16” wide jointer and a 16” thickness planer in the same foot print really has its advantages. In North America it is very common to see 6” and 8” jointers in many workshops but in Europe they are virtually nonexistent. In Europe it is far more common to see 12” and larger combination machines for the jointing and thicknessing operations in their shops.

The primary advantage of two machines in one is space but also it is nice to have that ability to “joint” the face of the wood prior to thicknessing. Having a 12” or larger jointer surface is an advantage over only being able to edge joint on a small 6” or 8” jointer surface. The JP1604HC has a 4 HP 220/1/60 motor which drives a 2 7/8”” diameter Stinger Carbide helical cutter head to machine lumber at up to 1/8” at each pass.

The Stinger carbide helical cutter head has 5 rows of 15mm x 15mm x 2.5mm square four sided convex edge carbide knives for a total of 80 knives. When an edge of a knife gets dull or damaged simply remove the locking screw and rotate the knife to a new edge. We find under normal wear and tear customers will get one to two years of performance from each edge of knife. The 5 rows of knives provide more knife cuts per inch, better overlap of the knives for less knife marks in the wood and virtually zero tear out even on the most difficult to thickness woods. Our Stinger Carbide helical cutter heads are renowned for ease of maintenance, quality of cut, and sound levels so pleasant you almost forget the machine is running.

The CWI-JP1604HC features and impressive 16” x 65.5” long heavily ribbed cast iron jointer table for excellent support with longer boards. Both the parallelogram infeed and outfeed jointer tables are independently adjustable for height using easy access levers on the front of the machine. There are two lever table locks to ensure the tables do not move once set to position. The front table adjusts for thickness of cut and the back table adjusts for accuracy to the cutter head height. The cast iron thickness planer table is 16” x 24” with a support roller for added workpiece support. The planer table is adjusted for height from 1/8” to an amazing 8 ¾” thickness capacity by use of a large hand wheel and a digital readout for accurate settings.

The changeover from Jointer to planer is really very simple and takes no time at all. Simply release the table security locks at each side of the cabinet under the table and raise the jointer surface in one move as both infeed and outfeed tables lift together. Then simply flip the dust collection hood over from jointer mode to thickness planer mode and you are ready to go. The other nice feature is because both tables lift at the same time the fence assembly does not have to be moved or removed. It simply remains in place. The heavy profile aluminum fence is 6” tall and an amazing 43” long for excellent work piece support as it travels the length of the jointer bed. The fence securely locks in any position for angle work as well.

NEW FEATURES:

Since 2019 the Scorpion jointer planers in both 12” and 16” have been outfitted with a number of new user friendly features truly making these extraordinary machines even better. First we have gone away from the traditional box type magnetic switch that sticks out of the front of many woodworking machines and gone to a new Euro machine body style with a flush mount electrical panel. This panel includes an on/off magnetic switch with overload and under voltage protection as well as a separate emergency mushroom stop button. Also on the panel is a new electronic digital height read out for the thickness planer tables. This makes it much easier to calibrate the machines height without bending around under the machine. Also the flush mount panel stops those uncomfortable knee bangs that used to happen when walking past the old magnetic box switch.

Another new feature is the Euro style guard now has a lever to unlock so users can easily swing the guard out of the way when performing certain cuts or maintenance on the cutterhead. The last really important feature we have been asked for is a mobility kit. Both models now come standard with 4” diameter rubber wheels attached to one side of the machine and a separate large wheeled handle that slips under the other side of the machine to allow the user to lift and steer the machine around his shop when space is needed. The machine sits normally on its frame for secure rigid footing and only engages the wheels when the handle is used.

Specifications:

• Easy and Quick Changeover from Jointer to Planer
• Both Jointer Tables Lift Together
• Front Facing Table Adjust Levers and Locks
• Swing Away Euro Blade Guard
• Easy Use Mobility Kit Included
• Electronic Digital Height Read Out for Planer Table
• Heavy Duty Aluminum Fence Assembly 6” x 43”
• Secure Fence Locks for Angle Work
• Jointer Table size 16″ x 65.5″
• Planer Table size 16” x 24”
• Maximum cutting width 16″
• Maximum cutting depth 1/8″
• Motor 4 HP 13 amp 220 volt
• Flush Mount Electrical Panel
• Cutter head speed 5500 rpm
• Feed Speed 23 ft/min
• Stinger 5 Row Carbide helical Cutter head 2 7/8” dia
• Number of Carbide knives 80
• Knife Size 15mm x 15mm x 2.5mm
• Dust Collection Chute with 5” Port
• Machine Weight 572 lbs
• Shipping Size 66″ x 28″ x 40.5″
• Shipping Weight 715 lbs (324 kg)

Scorpion jointers, thickness planers and combination machines are built by CWI Woodworking Technologies to be best in class machinery with the features, performance and quality that serious woodworkers are looking for whether in the hobby, educational or industrial woodworking industries. You will find our machines to have more cast iron, better cutters, easier adjustments, longer tables and superior quality to all competitors.

The CWI-P0315HC 15” Helical Thickness Planer is an excellent machine for the advanced hobbyist or early year’s educational woodworking shop. This machine differs from our CWI-P0416HC thickness planer in that it is a more traditional 4 post Taiwanese design. The P0315HC comes standard with a single phase power 3 HP 220/1/60 motor and will machine lumber at up to 1/8” at each pass. A magnetic safety switch is included with overload and under voltage protection. There are a total of 75 of the 15mm x 15mm x 2.5mm square four sided convex edge carbide knives on the Stinger cutter head. The 5 rows of knives provide more knife cuts per inch, better overlap of the knives for less knife marks in the wood and virtually zero tear out even on the most difficult to thickness woods. When an edge of a knife gets dull or damaged simply remove the locking screw and rotate the knife to a new edge. We find under normal wear and tear customers will get one to two years of performance from each edge of knife. Our Stinger Carbide helical cutter heads are renowned for ease of maintenance, quality of cut, and sound levels so pleasant you almost forget the machine is running.

The Scorpion P0315HC has two feed speeds of 16’ and 20’ per minute. There is a solid steel serrated infeed roller to ensure a very good grip to push lumber through the machine as well as a smooth surface polyurethane outfeed roller both mounted in a heavy cast iron frame. For added safety anti-kickback fingers are present in front of the infeed roller.

The extra large cast iron table measures 15” x 48” of surface area which includes two bolt on cast iron extensions for extremely good work piece support. The table is supported by four solid columns with chain driven jack screws for excellent precision and height adjustment. On the surface of the table are two adjustable table rollers to help the feeding of rough lumber. The cast iron table can manually be height adjusted with a large hand wheel for quick movement of the table between 1/8” and 6” thickness of the work piece. A couple of nice features are the built in mobility system for ease of moving the machine around the shop as well as two steel return rollers mounted to the top of the machine to assist in handling long lumber being transferred back and forth while machining multiple passes.

Specifications:

• 3 HP Motor 220/1/60 15AMP
• Magnetic Safety Switch
• 5000 RPM Cutter Head Speed
• Two Feed Speeds 16 and 20 Ft/Min
• Manual Table Elevation
• Maximum Cutting Depth 1/8”
• Solid Steel Serrated Infeed Roller
• Anti-Kick Back Fingers
• Stinger 5 Row Carbide Helical Cutter Head 2 7/8” dia
• 15mm x 15mm x 2.5mm carbide Knives (75 in Total)
• Dual Steel Return Rollers Mounted to Top of machine
• Dual Table Rollers
• Polyurethane Outfeed Roller
• Thickness Capacity of 1/8” to 6”
• Dust Hood 5”
• Shipping Size 28” x 27” x 45”
• Shipping Weight 587 lbs
• CSA Certified