The exclusive patented feature lets you join two clamps to create a more oversized clamp with more than double the opening capacity of a single clamp. Other features include easy/comfortable one‑handed clamping, 3‑1⁄8 in. jaw reach with protective pads, quick release lever, ergonomically contoured comfort grip, and can easily be converted to spreader clamps.

Support Blocks:

Dual slots allow for fast 90‑degree parallel clamps setup. Slots accept most parallel clamp brands, including Bessey®, Irwin®, Dewalt®, Jorgensen® and others*. The blocks securely hold four clamps at right angles to one another to create clamping fixtures for all types of rectangular objects, such as doors, frames, drawers, boxes and more.

Work Grippers:

Elevating your work off the bench while the high‑friction rubber pads on top stop the work piece from sliding.

Bench Dogs:

Fits into 3⁄4″ bench top holes to be used as bench dogs.

The Cabinet Master Parallel Clamp Extender allows you to connect two Jorgensen Parallel Clamps, significantly increasing your clamping capacity. Crafted from durable stretched aluminum, this extender is designed to sit flat on any table surface, ensuring stability during use. The tool‑free quick connection mechanism design align perfectly with the pre‑drilled holes in the clamp’s rail, enabling a smooth, fast and secure connection every time. Maximize your clamping potential with this simple yet powerful accessory. Fits Jorgensen Cabinet Master parallel clamps 8000, 8000P and 8100 series.

Features:

• Expand the clamping capacity with ease
• Tool-less Quick Connection

These clamp pads help prevents work pieces from marring and provides a more glue‑resistant surface compared to the actual jaws. Fits Jorgensen Cabinet Master parallel clamps 8000, 8000P and 8100 series.

Features:

• Prevent work piece marring and provide a more glue-resistant surface compared to the actual jaws.

The 2‑in‑1 Rail Stand & Glue Separator is designed for maximum versatility. As a glue separator, it elevates the workpiece from the rail surface to avoid stains from the interaction between steel, wood and glue. As a rail stand, It can be positioned at the bar end enables the clamp to stand upright stably. Fits Jorgensen Cabinet Master parallel clamps 8000, 8000P and 8100 series.

Features:

• Works as clamp stand and glue separator
• Support your project and make the bar easy to clean
• Also work as a clamp stand

The new Pro Series of Cabinet Master Clamps feature five major upgrades.

+46% Clamping Capacity – The improved clamping mechanism creates more force, up to 2200lbs

Improved Steel Thread – The handle thread is now stronger and can exert more clamping power

Improved Handle Grip – The uniquely contoured grip allows for greater torque by hand.

Improved 2-in-1 Clamp Stand – The new Clamp Stand can also be used as a glue separator

New Soft-Landing System – The sliding jaw will not free fall when used or carried vertically, preventing injury from a rapid fall of the sliding jaw.

Designed with a specially shaped fixed jaw, it effectively stabilizes your circular saw track, ensuring an accurate alignment with 12 x 8 mm grooves. This clamp is compatible with saw guides from leading brands such as Festool, Protool, Metabo, Makita, and DeWalt, making it a versatile addition to your toolkit.

Experience the convenience of the quick-release button, allowing for swift adjustments and releases, enhancing your workflow. Built with a high-strength drop-forged bar, this clamp offers exceptional durability, ensuring it withstands the demands of any project. Choose the Jorgensen Track Saw Quick-Ratchet Clamp for a dependable solution that elevates your woodworking efficiency.

Ductile Iron
Far stronger and more resilient than traditional Gray Iron. Ductile Iron absorbs vibrations, is highly resistant to cracking and will survive an accidental fall to the workshop floor that would break a gray iron casting.

Stress Relieved Casting
Internal stress must be relieved to ensure the machined casting will stay flat over time. Jorgensen stress relive castings by sitting castings for over 6 months and also soaking them at high temperature with a slow cooling over 48 hours for further relieved before use.

Flatness Tolerances
Ready to use out of box, with no need to further lapping or flattening. The soles have been carefully ground to a flatness tolerance of 0.0015”.

Pro 3mm O1 Steel Blade
Up to 1.6x thicker than other products for a solid cut with minimal vibration. Oil hardened high carbon tool steel for cold stamping with the great properties of high hardness and wear resistance.

Stainless Steel Hardware
For rust-resistance, smooth operation and adjustment.

Replacement Blade Model# 70731

Crafted from 60,000 PSI ductile iron, this ensures unmatched resilience, allowing the vise to withstand heavy‑duty use and deliver consistent performance over time. The precision machined round slide bar prevents front jaw movement at any opening distance, ensuring smooth and stable operation. Additional features include replaceable serrated Jaws and pipe jaws, a 360‑degree swivel base with dual lockdowns, and extra large anvil for striking. This is the perfect vise for professionals who require reliability and efficiency in every project.

New Features:

Replaceable Pipe Jaws
Increases life span compared to built-in non-replaceable jaw.

Fully Enclosed Design
Extends the life of the vise by protecting all internal components and keeping out dust and debris compared to an open design. Lifetime lubricated and permanently sealed for trouble-free service.

Precision Round Slide Bar
Provides smoother operation compared to square style.

Specifications: