SawStop along with Canadian Woodworker is proud to support The Skills Competition Groups across Canada. These demo units have been used at these events and are now available at a special educational sale price. Limited stock available at this sale price. Contact us for a shipping quote. 

The Professional Cabinet Saw (PCS) is an extremely well built table saw for use in education or home shops for customers looking for unparalleled safety and quality of saw. The PCS saws have three different fence options and two motor options. When ordering your saw first choose the motor size you wish to purchase and then the fence cutting capacity which will work best in your shop.

A fast-acting brake stops the blade when contact is detected. The brake includes a heavy-duty spring to push a block of aluminum, called a brake pawl, into the teeth of the blade to stop the blade from spinning. The spring is held in compression by a fuse wire until contact is detected. When contact is detected, the system sends a surge of electricity through the fuse wire to burn the wire and release the spring. The spring pushes the brake pawl into the teeth of the spinning blade, and the teeth cut into the aluminum and bind, thereby stopping the blade. All this happens in about 5 milliseconds, or 1/200th of a second. At the same time, the angular momentum of the blade causes the blade to retract below the table and the power to the motor is shut off. The optional brake cartridges are single-use components that must be changed if the brake is ever activated. Changing a brake cartridge is fast and easy, no more complicated than changing the blade.

A very nice blade guard designed specifically for the Professional Cabinet Saw features independent lateral sides to minimize exposure to the blade. It retains a low profile to allow for cuts as narrow as 3/4 of an inch. Riving knife minimizes kickback and provides protection during non-through cuts. We double-check the saw every time you turn it on with a diagnostic self-check which runs when you start the saw to ensure all systems are ready to detect an accident. If any problem is detected, the system will not allow the saw to start. Sometimes you have your hands full and really need to stop the blade. Our large start/stop paddle with hands-free shutoff can be pushed with your knee allowing you to safely stop the blade.

Never worry again about someone using your saw when you’re not around. The main power switch with lockout key prevents unauthorized users from operating the saw. When the power goes out, the saw stays off. The safety system won’t allow the motor to restart automatically when the power comes back on.

Left-tilting blade prevents wood from binding against the fence. A sophisticated dust shroud draws sawdust away from the blade and funnels it through a 4″ tube to a port at the rear of the cabinet. Effectively redirects dust away from the saw even when not attached to a dust collection system. Quick-release, zero-clearance insert provides support throughout the cut reducing tear out and chip out. The tool-free quick release makes removing the insert for blade or guard changes a breeze. A positive latching mechanism lets you know the insert is securely in place.

The 27″ deep extension table is compatible with popular after-market accessories including a router table extension.

Ample and easy access inside the cabinet. Three doors in the cabinet make it easy to get to all adjustment points on both sides of the trunnion.

Inconvenience is the enemy of safety. We made it easy to change between blade guard and riving knife with our tool-free blade guard quick change mechanism. Operators can remove the insert and make blade changes quickly with no tools required, minimizing disruptions to workflow. The safety bypass switch allows users to cut conductive material without activating the brake. Since the bypass has to be turned on every time the blade is started, you don’t have to remember to turn off the bypass system when you’re done.

Precise elevation changes made easy. The gas-assisted vertical elevation system is located close to the internal structure’s center of gravity, making fine-tuning smooth and easy. The elevation system operates on a vertical slide rather than on an arc providing you with repeatability and consistent alignment. Blade height is proportional to handle turns at all elevations. Mechanical adjustment points on the trunnion enable the operator to make micro adjustments, ensuring exact blade alignment at all bevel angles.

Models Available are:

• PCS31230-TGP236 – SAWSTOP 3HP 220V 10″PROFESSIONAL CABINET SAW 36″ RAIL, FENCE AND TABLE BOARD ASSEMBLY

Specifications:

• Footprint: 85 1/4″ w x 33″ d x 34″ h (w/ Pro-Glide Fence System & 52″ rails)
• Cabinet footprint: 19 3/8″ w x 19 3/8″ d
• Cast iron table: 20″ w x 27″ d, 44″ w x 27″ d (w/ extension wings)
• Extension table 40 1/8″ w x 27″ d (52″ rails)
• Weights: 265 lbs (table saw only) 449 lbs (with T-Glide Fence System & 52″ rails)
• Blade: 40-tooth, professional grade, 5/8″ arbor
• Blade diameter: 10″
• Blade tilt: Left
• Max. depth of cut, blade at 0° 3 1/8″
• Max. depth of cut, blade at 45° 2 1/4″
• Max. rip, right of blade: 52″ (with optional 52″ rails)
• Max. rip, left of blade:12″
• Dado diameter: 8″ (requires a separate brake cartridge and table insert)
• Dado max. width: 13/16″
• Arbor diameter at blade: 5/8″
• Table in front of blade (max. elevation): 10 1/4″
• Dust collection port diameter: 4″
• Riving knife / splitter thickness: 0.078″ (2mm)
• Blade guard: polycarbonate, extends only 5/8″ to right of blade
• Insert: zero clearance, steel core, ABS surfaces
• Hand wheels: 7″ diameter, cast iron with chrome handle
• Belts: 2 V-ribbed belts – arbor belt is static dissipative

Setting angles is quick and easy using the intuitive geared dial system, set in increments of 1°, 1/2°, 1/4°, or 1/10° with a positive “click” in each notch, or bypass the gear system for free turning. The extruded aluminum telescoping fence provides a solid reference surface for workpieces, with a maximum crosscut of 37-1/2” using the included flip stop.

Features:

The miter angle dial has preset increments of 1°, 1/2°, 1/4°, or 1/10° with tactile feedback so you can feel your desired angle click into place, making angle adjustments reliably accurate – quick and easy.

Common miter angles 0°, 22-1/2°, 30°, and 45° are noted and easy to set quickly.

Sliding wedge system for fence attachments and repeatable stops. The reversible, telescoping fence works with the miter gauge in either the left or right miter slots with equal accuracy and ease of use.

Make repeatable cuts up to 37-1/2″ in length using the tool-free articulating flip stop – with or without a sacrificial fence. A micro-adjuster lets you fine-tune a crosscut length without repositioning the flip stop. The flip stop includes mounting holes for adding jigs or locking into the wedge system.

Heavy-duty construction including a steel miter plate manufactured with machine tolerances of <.001” for exceptional precision.

A washer at the front end of the miter bar fits into 3/8” x 3/4” T-shaped miter slots to keep the miter gauge level when the head is pulled off the table for wide crosscuts. This washer can also be removed for use in non-T-shaped miter slots.

The miter bar has three adjustable pucks to eliminate side-to-side wiggle in the miter slot.

The 18” width fits a variety of SawStop table saw configurations*. Five drawers mounted on heavy-duty, 3/4-extension soft-close drawer slides allow you to store blades, wrenches, and accessories, such as a miter gauge, push sticks, insert plates, riving knife, feather boards, measuring tapes and rules, and SawStop brake cartridges. Pull the welded-steel cabinet from beneath the saw to use the durable UHMW top as a work surface.

Features:

• 1 vertical drawer with Pegboard for hanging tools and accessories
• 4 horizontal drawers offer storage for various tools and accessories
• Smooth, ball-bearing, soft-close drawer slides
• Foam block insert allows you to customize storage to fit your tools and accessories
• 4 locking, swivel casters for easy mobility
• Durable, stain- and impact-resistant UHMW top provides an additional work surface
• Heavy-duty welded steel construction
• *–The 18” cabinet will not fit under a PCS 36”-fence assembly if the saw is equipped with the Floating Dust Collection attachment (TSG-FDC) or right-side inline router table (RT-TGP).

The 32” width fits a variety of SawStop table saw configurations*. Five drawers mounted on heavy-duty, 3/4-extension soft-close drawer slides allow you to store blades, wrenches, and accessories, such as a miter gauge, push sticks, insert plates, riving knife, feather boards, measuring tapes and rules, and SawStop brake cartridges. Pull the welded-steel cabinet from beneath the saw to use the durable UHMW top as a work surface.

Features

• 1 vertical drawer with Pegboard for hanging tools and accessories
• 4 horizontal drawers offer storage for various tools and accessories
• Smooth, ball-bearing, soft-close drawer slides
• Foam block insert allows you to customize storage to fit your tools and accessories
• 4 locking, swivel casters for easy mobility
• Durable, stain- and impact-resistant UHMW top provides an additional work surface
• Heavy-duty welded steel construction
• *–The 32” cabinet will not fit under a saw equipped with the Floating Dust Collection attachment (TSG-FDC) or right-side inline router table (RT-TGP and RT-TGI).

• Router table opening: 11 3/4″ x 9 1/4″
• 32″ fence assembly dimensions: 35 3/4″L x 3 1/2″H x 4″W
• Max fence travel: 5 1/2″

Included Items:

Cast Iron Standalone Router Table

• RT-C32 32″ Cast Iron Table
• RT-F32 32″ Fence Assembly
• RT-STF Floor Stand
• Power switchbox
• Caster kit
• Owner’s Manual
• Installation Hardware

Please note that the router lift (RT-LFT) and dust box are individual items (RT-DCB) and are sold separately as stand alone products.

Specifications:

• Cast Iron Table Assembly Part #: RT-FS
• Cast Iron Table: 32” x 24”
• Height Above Floor: 34 1/2″ – 36 1/2″
• Router Table Opening: 11 3/4″ x 9 1/4″
• Max Fence Travel: 5 1/2”
• Front T-slot to Arbor Center: 7”
• Rear Miter T-slot: 3/4″ at top, 1″ at bottom, 3/8″ deep
• Rear T-slot to Arbor Center: 5 3/4”
• Rear Miter T-slot: 1/4″ at top, 11/32″ at bottom, 7/32″ deep
• Length: 35 3/4”
• Height: 3 1/2”
• Width: 4”

Features:

• Collects below-table dust
• Connects to 4” dust tube
• Compatible with all SawStop Router Tables

• Folds down flat for easy storage
• Custom brackets make it easy to lock your saw into place
• Stowed Dimensions: 5 1/2″ L x 26 1/4″ W x 39 1/4″ H

• Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface
• Positioning screws ensure a solid and precise fit in the table
• Pre-formed clearance slots for SawStop blade guard and riving knife
• Dual metal wear plates for anti-kickback pawls
• Positive locking latch allows for tool-free operation
• Compatible with ICS/PCS/CNS only