Jointer & Planer Performance Parts – Canadian Woodworker https://www.canadianwoodworker.com Thu, 15 Oct 2026 14:08:30 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://www.canadianwoodworker.com/wp-content/uploads/2023/11/logo_02-100x100.png Jointer & Planer Performance Parts – Canadian Woodworker https://www.canadianwoodworker.com 32 32 Stinger Tapered Head Torx Screw (T25) for Helical Cutterheads https://www.canadianwoodworker.com/product/stinger-tapered-head-torx-screw-t25-for-helical-cutterheads/ Fri, 31 Jan 2025 14:50:01 +0000 https://www.canadianwoodworker.com/?post_type=product&p=28153
  • SCREW DIAMETER 4.6MM
  • SCREW LENGTH 12.5MM
  • SMOOTH TAPERED HEAD ON SCREW
  • TORX T25 HEAD SIZE
  • SUGGESTED TIGHTENING IS 45 INCH POUNDS OF TORQUE
  • SOLD INDIVIDUALLY
    • ]]>         Stinger Torx Screw (T25) for Helical Cutterheads (Step) https://www.canadianwoodworker.com/product/stinger-torx-screw-t25-for-helical-cutterheads-step/ Fri, 31 Jan 2025 14:50:01 +0000 https://www.canadianwoodworker.com/?post_type=product&p=28154
  • SCREW DIAMETER 4.6MM
  • SCREW LENGTH 12.5MM
  • STEP DOWN HEAD ON SCREW
  • TORX T25 HEAD SIZE
  • SUGGESTED TIGHTENING IS 45 INCH POUNDS OF TORQUE
  • SOLD INDIVIDUALLY
    • ]]>         Wixey WR5001- WR510 Type 1 Readout Replacement https://www.canadianwoodworker.com/product/wixey-wr5001-wr510-type-1-readout-replacement/ Fri, 31 Jan 2025 14:42:25 +0000 https://www.canadianwoodworker.com/?post_type=product&p=27140 To upgrade your Model WR500 or replace a damaged Type 1 readout
    NOTE: cannot be used to replace a Type 2 readout

    ]]>         CMT Solid Carbide Portable Planer Knives 82mm https://www.canadianwoodworker.com/product/cmt-solid-carbide-portable-planer-knives-82mm/ Fri, 31 Jan 2025 14:34:51 +0000 https://www.canadianwoodworker.com/?post_type=product&p=25336 This is a CMT set of two 82mm x 5.5mm x 1.1mm solid carbide knives for use in portable hand held planers.

    • Measurements: 82×5.5×1.1mm
    • Pieces for each set: 2
    ]]>         General Magnum Solid Carbide Replaceable Insert Knife https://www.canadianwoodworker.com/product/general-magnum-solid-carbide-replaceable-insert-knife/ Fri, 31 Jan 2025 14:29:03 +0000 https://www.canadianwoodworker.com/?post_type=product&p=23539 These solid carbide insert knives are replacements for the General International Magnum thickness planer and jointer heads. They are 30mm x 12mm x 1.5mm in size with two sharp edges and have all four corners relief ground to avoid cutting lines in the workpiece. Must be purchased in packs of ten per order.

    • 30x12x1.5mm
    • 35° Cutting edge
    • Fits General Magnum Heads
    • Two Sharp Edges
    • Relieved Corners
    ]]>         Stinger Bearing Set (2 Pce) for Dewalt DW735 https://www.canadianwoodworker.com/product/stinger-bearing-set-2-pce-for-dewalt-dw735/ Fri, 31 Jan 2025 14:24:32 +0000 https://www.canadianwoodworker.com/?post_type=product&p=22573 This bearing set is a replacement for Dewalt DW735 portable thickness planers. These bearings are used on aftermarket carbide helical heads for this planer but can also be used on the factory supplied three knife hss cutterhead. There are two bearings included in the set.

    ]]>         Stinger Tapered Head Torx Screw (T20) for Helical Cutterheads https://www.canadianwoodworker.com/product/stinger-tapered-head-torx-screw-t20-for-helical-cutterheads/ Fri, 31 Jan 2025 14:24:05 +0000 https://www.canadianwoodworker.com/?post_type=product&p=22481 Replacement Torx tapered head screw to fit Stinger, Byrd and other brands of four sided carbide helical knives.

    • SCREW DIAMETER 4.6MM
    • SCREW LENGTH 12.5MM
    • SMOOTH TAPERED HEAD ON SCREW
    • TORX T20 HEAD SIZE
    • SOLD INDIVIDUALLY
    ]]>