The design of a compression router bit features a combination of both an up and down spiral, resulting in clean cuts both the top and bottom edges a variety of materials. On a mortise compression cutter, the upcut geometry is only .188”, allowing you to use this tool to create dados as shallow of .25”. This can be useful if you are short on space in your CNC machines tool tray or don’t have an automatic tool changer CNC.

This traditional mortise compression cutter is specially designed to be used with double sided melamine and other laminated particle board materials. It results in high quality cuts on MDF core materials as well, but due to the highly abrasive nature of MDF, you will not get the same tool life as you would on Melamine. If you process a high volume of MDF, you may want to look at a PCD cutter instead.

While you may find it inconvenient to have multiple cutting bits in your tooling line up, using the right bit for the job will increase tool life and result in lower tooling costs long term.

The Stinger Mortice compression cutters come equipped with our VenomBlue coating. This AlTiSiN-B coating acts like a lubricant and drastically reduces the friction between cutter and material. When your feedrate and RPM are optimized, this coating can extend the tool life by up to 5x when comparing to the uncoated alternatives. With the combination of the VenomBlue coating and the extremely high quality KCR05+ German carbide, these high quality bits offer the superb cut quality of a two flute bit, while offering the high cutting speed of a three flute bit.

Material: High Quality German NanoGrain KCR05+ Carbide (97% Tungsten Carbide, 3% Cobalt)

VenomBlue’s NanoGrain carbide grade is known for extremely high hardness and superior wear resistance. KCR05+ is selected for its ability to maintain a sharp edge under high thermal stress and abrasive conditions. With a grain size of less than 2 nanometers, this carbide structure has a higher hardness than almost all other competing carbide bits available that normally feature a grain size of 0.5 – 0.8 nanometers.

• Grain Size: < 0.2 μm
• Hardness: 94.4 ~ 94.5
• Density: 15.25 g/cm3
• This premium tool material is designed for use at high speeds.
• Recommended 20,000 RPM with feed rate of 28-34m/m

KCR05+ has an extremely high hardness however offers very little flexibility. Any instability, vibration, or improper setup may easily result in tool breakage.

Runout inspection before machining is very important. Ensuring proper installation and alignment provides a more stable working environment for the tool and helps minimize potential issues during cutting, while also improving tool performance and lifespan. When using ER collets, we recommend maintaining the runout within 10 μm (0.01 mm) If the measured runout exceeds this limit, we recommend immediately replacing the collet.

Coating: AlTiSiN-B (Aluminum Titanium Silicon Nitride with Boron)

An advanced PVD (Physical Vapor Deposition) coating designed for extreme high-speed, dry-cutting, and hard-machining applications, offering superior hardness, thermal stability and oxidation resistance. It often outperforms standard AlTiN and AlTiSiN coatings by providing enhanced lubrication, lower friction, and higher wear resistance.

• Enhanced Performance: The inclusion of Silicon (forms a nanocomposite structure, increasing hardness, while Boron (improves lubricating properties and reduces the wear rate.
• High Thermal Stability: Withstands high temperatures, making it ideal for dry cutting and preventing edge deformation in hard materials.
• Increased Productivity: Allows for faster cutting speeds and higher feed rates, resulting in reduced machining time and lower costs.

Specifications:

• Cutting Depth: 7/8″
• Oxidation Temperature: 1100 Deg. C
• Surface Hardness (HV): 3500
• Friction Coefficient: 0.45
• Coating Thickness (μm): 1~4
• Extends tool life up to 5x compared to an uncoated tool

The design of a compression router bit features a combination of both an up and down spiral, resulting in clean cuts both the top and bottom edges a variety of materials. On a mortise compression cutter, the upcut geometry is only .188”, allowing you to use this tool to create dados as shallow of .25”. This can be useful if you are short on space in your CNC machines tool tray or don’t have an automatic tool changer CNC.

The cutting edge of this mortise compression cutter offers chip breakers, making it the perfect choice for Plywood core materials. When using a standard compression cutter on plywood, you will notice long, stringy chips in your dust collection and will find the edge of the plywood gets torn out instead of a nice clean cut. The segmented flute design breaks the chips up into smaller pieces, creating a fantastic edge for plywood core materials.

While you may find it inconvenient to have multiple cutting bits in your tooling line up, using the right bit for the job will increase tool life and result in lower tooling costs long term.

The Stinger Mortice compression cutters come equipped with our VenomBlue coating. This AlTiSiN-B coating acts like a lubricant and drastically reduces the friction between cutter and material. When your feedrate and RPM are optimized, this coating can extend the tool life by up to 5x when comparing to the uncoated alternatives. With the combination of the VenomBlue coating and the extremely high quality KCR05+ German carbide, these high quality bits offer the superb cut quality of a two flute bit, while offering the high cutting speed of a three flute bit.

Material: High Quality German NanoGrain KCR05+ Carbide (97% Tungsten Carbide, 3% Cobalt)

VenomBlue’s NanoGrain carbide grade is known for extremely high hardness and superior wear resistance. KCR05+ is selected for its ability to maintain a sharp edge under high thermal stress and abrasive conditions. With a grain size of less than 2 nanometers, this carbide structure has a higher hardness than almost all other competing carbide bits available that normally feature a grain size of 0.5 – 0.8 nanometers.

• Grain Size: < 0.2 μm
• Hardness: 94.4 ~ 94.5
• Density: 15.25 g/cm3
• This premium tool material is designed for use at high speeds.
• Recommended 20,000 RPM with feed rate of 28-34m/m

KCR05+ has an extremely high hardness however offers very little flexibility. Any instability, vibration, or improper setup may easily result in tool breakage.

Runout inspection before machining is very important. Ensuring proper installation and alignment provides a more stable working environment for the tool and helps minimize potential issues during cutting, while also improving tool performance and lifespan. When using ER collets, we recommend maintaining the runout within 10 μm (0.01 mm) If the measured runout exceeds this limit, we recommend immediately replacing the collet.

Coating: AlTiSiN-B (Aluminum Titanium Silicon Nitride with Boron)

An advanced PVD (Physical Vapor Deposition) coating designed for extreme high-speed, dry-cutting, and hard-machining applications, offering superior hardness, thermal stability and oxidation resistance. It often outperforms standard AlTiN and AlTiSiN coatings by providing enhanced lubrication, lower friction, and higher wear resistance.

• Enhanced Performance: The inclusion of Silicon (forms a nanocomposite structure, increasing hardness, while Boron (improves lubricating properties and reduces the wear rate.
• High Thermal Stability: Withstands high temperatures, making it ideal for dry cutting and preventing edge deformation in hard materials.
• Increased Productivity: Allows for faster cutting speeds and higher feed rates, resulting in reduced machining time and lower costs.

Specifications:

• Cutting Depth: 7/8″
• Oxidation Temperature: 1100 Deg. C
• Surface Hardness (HV): 3500
• Friction Coefficient: 0.45
• Coating Thickness (μm): 1~4
• Extends tool life up to 5x compared to an uncoated tool

Not only do these bits have a unique tool geometry, the Stinger V-Groove cutters come equipped with our VenomBlue coating. This AlTiSiN-B coating acts like a lubricant and drastically reduces the friction between cutter and material. When your feed rate and RPM are optimized, this coating can extend the tool life by up to 5x when comparing to the uncoated alternatives.

• Material: High Quality German MicroGrain K20 Carbide (95% Tungsten Carbide, 5% Cobalt)
• Good balance of wear resistance (hardness) and toughness (using a cobalt binder).
• The cobalt binder provides excellent toughness, making the rods resistant to impact and fracture.
• Reliable and versatile performance for a variety of general-purpose woodworking applications.
• Best for: Standard, general-purpose applications. K20 Carbide is widely used for cutting non-ferrous metals, plastics, and wood.

Coating: AlTiSiN-B (Aluminum Titanium Silicon Nitride with Boron)

An advanced PVD (Physical Vapor Deposition) coating designed for extreme high-speed, dry-cutting, and hard-machining applications, offering superior hardness, thermal stability and oxidation resistance. It often outperforms standard AlTiN and AlTiSiN coatings by providing enhanced lubrication, lower friction, and higher wear resistance.

• Enhanced Performance: The inclusion of Silicon (forms a nanocomposite structure, increasing hardness, while Boron (improves lubricating properties and reduces the wear rate.
• High Thermal Stability: Withstands high temperatures, making it ideal for dry cutting and preventing edge deformation in hard materials.
• Increased Productivity: Allows for faster cutting speeds and higher feed rates, resulting in reduced machining time and lower costs.

Specifications:

• Diameter: 1/4″
• Cutting Length: 7/8″
• Overall Length: 2-1/2″
• Shank: 1/4″
• Recommended RPM: 18,000
• Recommended Feed Rate: 80″/m
• Oxidation Temperature: 1100 Deg. C
• Surface Hardness (HV): 3500
• Friction Coefficient: 0.45
• Coating Thickness (μm): 1~4
• Extends tool life up to 5x compared to an uncoated tool

Not only do these bits have a unique tool geometry, the Stinger V-Groove cutters come equipped with our VenomBlue coating. This AlTiSiN-B coating acts like a lubricant and drastically reduces the friction between cutter and material. When your feed rate and RPM are optimized, this coating can extend the tool life by up to 5x when comparing to the uncoated alternatives.

• Material: High Quality German MicroGrain K20 Carbide (95% Tungsten Carbide, 5% Cobalt)
• Good balance of wear resistance (hardness) and toughness (using a cobalt binder).
• The cobalt binder provides excellent toughness, making the rods resistant to impact and fracture.
• Reliable and versatile performance for a variety of general-purpose woodworking applications.
• Best for: Standard, general-purpose applications. K20 Carbide is widely used for cutting non-ferrous metals, plastics, and wood.

Coating: AlTiSiN-B (Aluminum Titanium Silicon Nitride with Boron)

An advanced PVD (Physical Vapor Deposition) coating designed for extreme high-speed, dry-cutting, and hard-machining applications, offering superior hardness, thermal stability and oxidation resistance. It often outperforms standard AlTiN and AlTiSiN coatings by providing enhanced lubrication, lower friction, and higher wear resistance.

• Enhanced Performance: The inclusion of Silicon (forms a nanocomposite structure, increasing hardness, while Boron (improves lubricating properties and reduces the wear rate.
• High Thermal Stability: Withstands high temperatures, making it ideal for dry cutting and preventing edge deformation in hard materials.
• Increased Productivity: Allows for faster cutting speeds and higher feed rates, resulting in reduced machining time and lower costs.

Specifications:

• Diameter: 1/4″
• Cutting Length: 7/8″
• Overall Length: 2-1/2″
• Shank: 1/4″
• Recommended RPM: 18,000
• Recommended Feed Rate: 80″/m
• Oxidation Temperature: 1100 Deg. C
• Surface Hardness (HV): 3500
• Friction Coefficient: 0.45
• Coating Thickness (μm): 1~4
• Extends tool life up to 5x compared to an uncoated tool

Technical details:

• Replaceable Standard Precision 0.015 collets. 0; -0,7mm wide clamping tolerance.
• Replaceable High Precision 0.005 collets. 0; -1mm wide clamping tolerance.
• Suitable for most conical chucks. Fit most tapered spindle noses.

Perfect for use with table saws, routers, drill presses, CNC machines, cutting sleds, jigs, panels, and vertical mills, this versatile clamp set is a must-have for any workshop. The black rubber padding helps prevent slipping and protects your materials from damage, ensuring a secure hold without compromising the integrity of your workpiece.

Part Number: WJ25-101

• Solid Carbide Knives (2/30°) 28x14x2mm
• Priced Individually
• Must be purchased in quantities of 10

Raise the bit and produce a delicate fine point incision, or work the whole 12,7mm diameter to render bold highlighted lettering.
Super strong steel shank and micrograin carbide cutting edges guarantee long lasting performance.

• 1/4″ Diameter
• 25/64″ Cutting Length
• 35 Degree Cutting Angle
• 2″ Total Length
• 1/4″ Shank

The foundation of the 5×10 machine is a 4200 pound very heavy duty welded steel floor model frame. The Bakelite vacuum table with t-slot tracks is then mounted to the steel frame for an excellent working surface with plenty of options for the use of hold down jigs and vacuum clamping. The German made, Becker 300 cubic meter per hour vacuum pump, (200 CMH on 4 x 8 / 300 CMH on 4 x 9 & 5 x 10) offers plenty of holding power to keep parts in place while machining. To operate the vacuum zones, the CabinetMaker has a simple push button electrical panel for ease of operation under the frame.

The massive gantry rides on extremely accurate helical rack and pinion and linear guide ways for each of “X”, “Y” and “Z” movements. The gantry movement is powered by Yaskawa servo motors and controllers for a cutting speed of up to 700 inches per minute and a travelling speed up to 1500 inches per minute. The router spindle is a high quality Italian made HSD brand 9kw (12HP) three phase motor which comes with 10mm, 20mm, 3/8″ and 1/2″ high precision ER32 collets.

The CabinetMaker CNC offers 12″ of “Z” travel while providing up to 10.5″ of machining height which is extremely helpful for the occasional solid wood machining most shops encounter. At the rear of the vacuum table is the linear tool holder with eight holder positions for the ISO30 chucks and tooling.

Also near the tool holders is a tool changing station and wrench for quick and easy changes of tooling. A tool measuring device is also a key feature to allow quick measurements on new loaded tools. The machining area of the 5 x 10 model working area is 61 ¾” x 121 ½” with a gantry clearance height of 12″.

For ease of machining, we include a set of six adjustable pneumatic reference pins which allows the operator to quickly load and reference sheets, as well as align both large sheets and small parts for double-sided machining applications. No mistaking where your router bit will find the work piece.

For operation of the machine we include the simple and easy to use NC60A controller with 27″ monitor screen on a separate operations stand. The control box full of German CSA contactors, fuses and holders, Delta Inverter, Omron safety switch controls, and Yaskawa Servo controls.

The overhead dust collection assembly is extremely well designed for efficiency and ease of use. The dust hood will automatically raise and lower via pneumatic cylinder when changing or measuring tools, but what makes the CabinetMaker dust control unique is that the dust boot “floats” on top of the material.

This feature will increase suction while extending the life of the dust bristles and eliminating any down pressure caused by the bristles, reducing the likelihood of small parts being moved while in operation. The dust hood has a 6” inlet with an attached 6″ hose to an upper dust connection point, keeping the shop dust collection a simple and out of the way task.

For great space savings and ease of maintenance the CabinetMaker houses all its electrical and vacuum controls under the frame of the machine. The CabinetMaker CNC is fully CSA certified for use in Canadian commercial applications or anywhere users need higher quality electrical protection.

CabinetMaker CNC will offer better performance, world class components, quality, and features than any competitive machine in its class.

Options Available:

• Working Area: 4′ x 8′, 4′ x 9′ or 5′ x 10′
• Rotary Fourth Axis Tool Changer
• Single Phase Electrics
• Software
• Tooling
• Delivery and Installation
• Training

Specifications:

• Working size: 61 ¾” x 121 ½” x 10.5″
• 12 HP (S1) HSD Italian ATC Industrial Air Cooled Spindle (24,000RPM)
• Pneumatically Controlled Floating Vacuum Hood (6” Port)
• 10 Positions Linear Tool Holder Magazine
• Automatic Tool Measuring System w/Pneumatic Clean Device
• ISO30 Tool Holders (Three Included w/machine)
• ER32 Collets (1/4″, ½” 3/8″ and 20mm Included with machine)
• Tool Holder Wrench
• Convenient Tool Changing Station
• T-Slot Bakelite Vacuum Table w/Six Push Button Zone Control
• Becker 300 cm/h Vacuum Pump
• NC60A Control System (Extremely Easy Functions)
• Under Frame Electronics Cabinet w/Key Lockable Door
• USB Information Transfer Ports
• Yaskawa Servo Drivers and Motors (Two in “Y” and One each in “Z” and “X”)
• Very Reliable Mechanical Homing System with Limits Control
• Japanese Omron Limit Micro Switches
• DELTA Three Phase Motor Inverter
• SHIMPO Servo Gear Reducers
• Helical Rack & Pinion on X&Y Axis
• Precision Ball Screw Z Axis
• Robust Cable Holding Carrier Rated for over 300,000 bends
• Traveling Speed 125ft/min
• Working Speed 60ft/min
• Siemens CSA Contactors and Breakers
• Siemens CSA Disconnect w/Safety Lockout
• THK Linear Rails
• Six Pneumatic Reference Locator Pins (for aligning work piece)
• 3PH 220V 60HZ (Phase Converter Available for Single Phase Operation)
• CSA Certification
• Floor Space 72″ x 126″
• 88″ x 166″ x 79″ Plywood Crate
• Shipping Weight: 5,500 lbs

The foundation of the 4 x 9 machine is a 3800 pound very heavy duty welded steel floor model frame. The Bakelite vacuum table with t-slot tracks is then mounted to the steel frame for an excellent working surface with plenty of options for the use of hold down jigs and vacuum clamping. The German made, Becker 300 cubic meter per hour vacuum pump, (200 CMH on 4 x 8 / 300 CMH on 4 x 9 & 5 x 10) offers plenty of holding power to keep parts in place while machining. To operate the vacuum zones, the CabinetMaker has a simple push button electrical panel for ease of operation under the frame. The CabinetMaker comes with six heavy duty adjustable feet to make sure of a solid footing on the shop floor.

The massive gantry rides on extremely accurate helical rack and pinion and linear guide ways for each of “X”, “Y” and “Z” movements. The gantry movement is powered by Yaskawa servo motors and controllers for a cutting speed of up to 700 inches per minute and a travelling speed up to 1500 inches per minute. The router spindle is a high quality Italian made HSD brand 9kw (12HP) three phase motor which comes with 10mm, 20mm, 3/8″ and 1/2″ high precision ER32 collets.

The CabinetMaker CNC offers 12″ of “Z” travel while providing up to 10.5″ of machining height which is extremely helpful for the occasional solid wood machining most shops encounter. At the rear of the vacuum table is the linear tool holder with eight holder positions for the ISO30 chucks and tooling.

Also near the tool holders is a tool changing station and wrench for quick and easy changes of tooling. A tool measuring device is also a key feature to allow quick measurements on new loaded tools. The machining area of the 4′ x 9′ model is 49¾” x 109¾″ (4′ x 8′ model working area is: 49 1/4″ x 97.5″ / 5 x 10 model working area is 61 ¾” x 121 ½”). All CabinetMaker models feature a gantry clearance height of 12″.

For ease of machining, we include a set of six adjustable pneumatic reference pins which allows the operator to quickly load and reference sheets, as well as align both large sheets and small parts for double-sided machining applications. No mistaking where your router bit will find the work piece.

For operation of the machine we include the simple and easy to use NC60A controller with 27″ monitor screen on a separate operations stand. The control box full of German CSA contactors, fuses and holders, Delta Inverter, Omron safety switch controls, and Yaskawa Servo controls.

The overhead dust collection assembly is extremely well designed for efficiency and ease of use. The dust hood will automatically raise and lower via pneumatic cylinder when changing or measuring tools, but what makes the CabinetMaker dust control unique is that the dust boot “floats” on top of the material. This feature will increase suction while extending the life of the dust bristles and eliminating any down pressure caused by the bristles, reducing the likelihood of small parts being moved while in operation. The dust hood has a 6” inlet with an attached 6″ hose to an upper dust connection point, keeping the shop dust collection a simple and out of the way task.

For great space savings and ease of maintenance the CabinetMaker houses all its electrical and vacuum controls under the frame of the machine. The CabinetMaker CNC is fully CSA certified for use in Canadian commercial applications or anywhere users need higher quality electrical protection.

CabinetMaker CNC will offer better performance, world class components, quality, and features than any competitive machine in its class.

Options Available:

• Working Area 4′ x 8′ or 5′ x 10′
• Rotary Fourth Axis Tool Changer
• Single Phase Electrics
• Software
• Tooling
• Delivery and Installation
• Training

Specifications:

• Working size: 49¾” x 109¾” x 10.5″
• 12 HP (S1) HSD Italian ATC Industrial Air Cooled Spindle (24,000RPM)
• Pneumatically Controlled Floating Vacuum Hood (6” Port)
• 8 Positions Linear Tool Holder Magazine ( 10 position Linear on 5 x 10)
• Automatic Tool Measuring System w/Pneumatic Clean Device
• ISO30 Tool Holders (Three Included w/machine)
• ER32 Collets (1/4″, ½” 3/8″ and 20mm Included with machine)
• Tool Holder Wrench
• Convenient Tool Changing Station
• T-Slot Bakelite Vacuum Table w/Five Push Button Zone Control (6 Zones on 5 x 10)
• Becker 200 cm/h Vacuum Pump (300 cm/h on 5 x 10)
• NC60A Control System (Extremely Easy Functions)
• Under Frame Electronics Cabinet w/Key Lockable Door
• USB Information Transfer Ports
• Yaskawa Servo Drivers and Motors (Two in “Y” and One each in “Z” and “X”)
• Very Reliable Mechanical Homing System with Limits Control
• Japanese Omron Limit Micro Switches
• DELTA Three Phase Motor Inverter
• SHIMPO Servo Gear Reducers
• Helical Rack & Pinion on X&Y Axis
• Precision Ball Screw Z Axis
• Robust Cable Holding Carrier Rated for over 300,000 bends
• Traveling Speed 125ft/min
• Working Speed 60ft/min
• Siemens CSA Contactors and Breakers
• Siemens CSA Disconnect w/Safety Lockout
• THK Linear Rails
• Six Pneumatic Reference Locator Pins (for aligning work piece)
• 3PH 220V 60HZ (Phase Converter Available for Single Phase Operation)
• CSA Certification
• Floor Space 72″ x 146″
• 90″ x 150″ x 84″ Plywood Crate