Features:

Wheel Size: The Rivolver CBN wheels are currently available in an 8” x 1.5” width and 5/8” bore to fit most 8” slow speed grinders. CBN wheels can be used on higher speed grinders as well but a special skill is required to make sure the grind is not too aggressive. With CBN wheels there is no abrasives flaking off the wheels so guards are no longer required. The 1.5” width provides ample room for the largest of chisels.

Radiused Edge: The Rivolver CBN wheels are specifically designed to properly sharpen all the tools in your tool box. The flat face for hollow grinding and with an accessory sharpening jig is perfect for all tools. The radiused edge is perfect for round nosed tools if you don’t have a fingernail sharpening jig. Simply glide the round edge of your tool on each of the radiused edges for perfect rounded results.

Long-Lasting Durability: Crafted from high-quality machined aluminum bodies, precisely machined for accurate size and flatness, these wheels are electroplated with CBN (cubic boron nitride) particles. CBN is nearly as hard as diamond, ensuring you can grind even the toughest steels with ease.

No Truing Needed: Unlike traditional grinding wheels, the Rivolver CBN Grinding Wheels never needs truing, saving you time and hassle. Plus, the wheel maintains its size, eliminating the need for periodic adjustments to your sharpening jigs.

Cooler Grinding Surface: CBN’s superior thermal conductivity, combined with the heavy machined aluminum body, keeps the abrasive surface cooler. This allows you to grind right to the tip of your tools without overheating, reducing the need for extensive honing afterwards.

Grit Selection: The Rivolver CBN wheels are available in four grit sizes. The 80 grit is for repairing damaged tools or aggressive grinding or re-shaping of the tools.  The 180 grit is the perfect choice for general sharpening of the tools  and the 350 grit is for providing a superior finish for day to day use. The 600 grit is for high polish tools for the utmost perfection of the finished edge of your tools.

Upgrade to the Rivolver 8″ Radiused Edge CBN Grinding Wheels and experience unmatched efficiency and precision in your grinding tasks. Perfectly designed to complement the Rivolver CWI-BG805 and CWI-BG808 Bench Grinders, or on other brand slow RPM grinders, this wheel will revolutionize the way you sharpen and grind, providing a consistently superior performance.

Available Grits for Versatile Applications:

• CWI-CBN1.5-8-080: 80 Grit for aggressive material removal and rough grinding.
• CWI-CBN1.5-8-180: 180 Grit for medium grinding and sharpening.
• CWI-CBN1.5-8-220: 220 Grit for medium-fine grinding and sharpening.
• CWI-CBN1.5-8-350: 350 Grit for fine grinding and honing.
• CWI-CBN1.5-8-600: 600 Grit for ultra-fine grinding and polishing.

It comes with an integrated polish and is easy to use. You can also use your composite honing wheel for regular maintenance and to quickly regain sharpness when you don’t need to establish a new bevel. The CW-220 Composite Honing Wheel fits the Tormek T-8.

Why CW-220 Composite Honing Wheel?

• Deburrs the edge more quickly.
• Maintains your tools between sharpenings.
• Durable composite material with integrated polish for cleaner honing without honing compound.
• Vegan alternative to a leather honing wheel.
• Fits the Tormek T-8, Tormek T-7 and older models with a honing wheel 215-220 mm (8 1/2-8 5/8″) in diameter and 26 mm (1″) wide.

Cleaner honing

The CW-220 Composite Honing Wheel is suitable for use in clean environments as you don’t need to use honing compound. Instead, it has polish integrated into the composite material. You can deburr the edge quickly and get great results without getting yourself or your work station dirty!

Wet for more feel

You can wet the CW-220 Composite Honing Wheel with a little water for smoother honing. Use a sponge or cloth dipped in plain tap water. Hold it against the honing wheel with the machine running. This gives a softer feel to honing if you otherwise find it to be a bit aggressive.

It’s also used for routine maintenance to quickly regain sharpness when you don’t need to establish a new bevel. The LA-145 Leather Honing Wheel fits the Tormek T-4.

Why LA-145 Leather Honing Wheel?

• Polishes the bevel and deburrs the edge.
• Maintains your tools between sharpenings.
• Quality cowhide that lasts year after year.
• Fits the Tormek T-4, Tormek T-3 and older models with a honing wheel 145 mm (5 3/4″) in diameter and 26 mm (1″) wide.

Restores the edge between sharpenings

The LA-145 Leather Honing Wheel is used with PA-70 Honing Compound. Honing your tool on the leather honing wheel after sharpening gives you maximum sharpness for your edge tool. Honing highly improves edge retention and provides excellent maintenance. You can quickly and easily realign the edge against the leather honing wheel between sharpenings. When the honing wheel is new, impregnate it with light machine oil before applying the honing compound so as to extend its service life and get the best performance.

Quality vegetable tanned leather

The leather on the LA-145 Leather Honing Wheel comes from the respected Tärnsjö Garveri tannery in Sweden. They’ve been tanning and manufacturing leather products for 150 years and are now one of the few tanneries to tan their leather using only natural vegetable products. The leather on Tormek’s leather honing wheels is both eco-friendly and of top quality.

This allows you to hone the inside of the edge on tools with a smaller radius or tighter angle.

Why LA-124 Set of Narrow Exchange Discs?

• Quality cowhide that lasts year after year.
• Fits the LA-120 Profiled Leather Honing Wheel.
• Hones arched edge tools with a smaller radius or tighter angle.

Replace regular profiled honing wheels with narrower ones

LA-124 Set of Narrow Exchange Discs are an accessory for the LA-120 Profiled Leather Honing Wheel. You can easily replace the leather in your standard profiled leather honing wheels to be able hone your smallest woodturning gouges, carving gouges and V-gouges.

The LA-124 Set of Narrow Exchange Discs includes two leather honing wheels, one with a 2 mm (1/16″) radius and one with a 45° tip.

Quality vegetable tanned leather

The leather on the LA-124 Set of Narrow Exchange Discs comes from the respected Tärnsjö Garveri tannery in Sweden. They’ve been tanning and manufacturing leather products for 150 years and are now one of the few tanneries to tan their leather using only natural vegetable products. The leather on Tormek’s leather honing wheels is both eco-friendly and of top quality.

The leather honing wheel gently removes the burrs built up during sharpening and polishes your bevel for the sharpest and most edge retaining results. It’s also used for routine maintenance to quickly regain sharpness when you don’t need to establish a new bevel. The LA-220 Leather Honing Wheel fits the Tormek T-8.

Why LA-220 Leather Honing Wheel?

• Polishes the bevel and deburrs the edge.
• Maintains your tools between sharpenings.
• Quality cowhide that lasts year after year.
• Fits the Tormek T-8, Tormek T-7 and older models with a honing wheel 215-220 mm (8 1/2-8 5/8″) in diameter and 26 mm (1″) wide.

Restores the edge between sharpenings

The LA-220 Leather Honing Wheel is used with PA-70 Honing Compound. Honing your tool on the leather honing wheel after sharpening gives you maximum sharpness for your edge tool. Honing highly improves edge retention and provides excellent maintenance. You can quickly and easily realign the edge against the leather honing wheel between sharpenings. When the honing wheel is new, impregnate it with light machine oil before applying the honing compound so as to extend its service life and get the best performance.

Quality vegetable tanned leather

The leather on the LA-220 Leather Honing Wheel comes from the respected Tärnsjö Garveri, opens in new window. tannery in Sweden. They’ve been tanning and manufacturing leather products for 150 years and are now one of the few tanneries to tan their leather using only natural vegetable products. The leather on Tormek’s leather honing wheels is both eco-friendly and of top quality.

It’s been developed over the years to combine efficient sharpening and a fine surface finish with a long service life. The more compact dimensions are adapted to our more compact machines for anyone with limited space or those who need to easily transport their Tormek. The SG-200 Original Grindstone is supplied as standard with the Tormek T-4 Original.

Why SG-200 Original Grindstone?

• All-round grindstone with adjustable sharpening characteristics equivalent to between 220 and 1000 grit.
• Long service life, often lasts many years.
• Can be trued with the TT-50 Truing Tool to regain a perfectly flat surface.
• Can grind most steel grades.
• Fits the Tormek T-4, Tormek T-3 and older models with a grinding wheel 200 mm (7 7/8″) in diameter and 40 mm (1.5/8″) wide.

All-round sharpening for professionals and amateurs

The SG-200 Original Grindstone is the perfect all-round grindstone. The grit can be adjusted between 220 and 1000 grit with the SP-650 Stone Grader. This makes it excellent for both coarse and fine sharpening, and it easily sharpens most types of tools and steel grades.

The SG-200 Original Grindstone is supplied as standard with the Tormek T-4 Original and Tormek T-4 Bushcraft. It’s also available for the Tormek T-8 Original and Tormek T-8 Custom, but with different dimensions as the SG-250 Original Grindstone.

Always round

The TT-50 Truing Tool allows you to remove the very top layer of the grindstone to restore a perfectly round shape. When the grindstone is freshly trued, the surface is particularly aggressive and can be used for an especially aggressive sharpening. The SG-200 fits the Tormek T-4 Original, Tormek T-4 Bushcraft, Tormek T-3 and earlier Tormek models with a grinding wheel 200 mm (7 7/8″) in diameter and 40 mm (1 5/8″) wide.

It has a grit of 360 for fast steel removal and is particularly useful for tool shaping.

Why DC-250 Diamond Wheel Coarse?

• Diamond grinding wheel for the Tormek T-8.
• Fast steel removal to repair or reshape edges.
• Constant shape, always maintains the same diameter.
• Sharpens all types of steel and ceramic.
• Allows sharpening on the flat side of the grinding wheel for a completely flat bevel.
• Exceptional durability with diamond, the world’s hardest abrasive.

Sharpens all materials

This diamond grinding wheel can grind all types of materials, including steel, ceramics and carbide. The DC-250 Diamond Wheel Coarse fits the Tormek T-8 Original, Tormek T-8 Custom, Tormek T-7 and earlier models with a grinding wheel 250 mm (9 7/8″) in diameter.

The DC-250 Diamond Wheel Coarse doesn’t give a fine surface finish and should be followed up by sharpening with a finer grinding wheel, such as the DF-250 Diamond Wheel Fine or DE-250 Diamond Wheel Extra Fine.

Simplifies repeat sharpening

All of Tormek’s diamond grinding wheels have exceptional durability and constant abrasive power, which means that they always stay round and flat with a full-size diameter. Users who often sharpen the same tool benefit greatly from this, as it simplifies both jig setting and sharpening.

Get a completely flat bevel

The constant shape makes it possible to sharpen either on the side of the wheel or on its upper surface. Side sharpening is perfect for smaller tools such as knives, chisels, carving gouges and v-tools. The result is an edge with a completely flat bevel, instead of a slightly concave surface.

For sharpening on the side of the diamond grinding wheels, we recommend using the MB-102 Multi Base together with the jig designed for your specific tool. Both the base and the jigs give you support and control throughout the sharpening process.

Rust protection for increased service life

All diamond grinding wheels are supplied with 150 ml of ACC-150 Anti-Corrosion Concentrate. Always add the concentrate to the water when sharpening with water to prevent rust on the grinding wheel. Add 10 ml (0.02 pints) of concentrate to 250 ml (0.4 pints) of water (~4%). We recommend always using water when sharpening with diamond grinding wheels if possible, as it both prolongs the service life of the wheel and provides a smoother sharpening surface. You can also sharpen without water.

The grinding wheel has a grit of 600, providing fast sharpening and a smooth surface finish.

Why DF-250 Diamond Wheel Fine?

• Diamond grinding wheel for the Tormek T-8.
• Effective steel removal combined with a smooth finish.
• Constant shape, always maintains the same diameter.
• Sharpens all types of steel and ceramic.
• Allows sharpening on the flat side of the grinding wheel for a completely flat bevel.
• Exceptional durability with diamond, the world’s hardest abrasive.

A grinding wheel for all materials

This diamond grinding wheel can sharpen all types of materials, including steel, ceramics and carbide. The DF-250 Diamond Wheel Fine fits the Tormek T-8 Original, Tormek T-8 Custom, Tormek T-7 and earlier models with a grinding wheel 250 mm (9 7/8″) in diameter.

Simplifies repeat sharpening

All of Tormek’s diamond grinding wheels have exceptional durability and constant abrasive power, which means that they always stay round and flat with a full-size diameter. Users who frequently sharpen the same tool can benefit from this, as it simplifies both jig setting and sharpening. The DF-250 Diamond Wheel Fine is particularly appreciated by woodturners.

Get a completely flat bevel

The constant shape makes it possible to sharpen either on the side of the wheel or on its upper surface. Side sharpening is perfect for smaller tools such as knives, chisels, carving gouges and v-tools. The result is an edge with a completely flat bevel, instead of a slightly concave surface.

For sharpening on the side of the diamond grinding wheels, we recommend using the MB-102 Multi Base together with the jig designed for your specific tool. Both the base and the jigs give you support and control throughout the sharpening process.

Rust protection for increased service life

All diamond grinding wheels are supplied with 150 ml of ACC-150 Anti-Corrosion Concentrate. Always add the concentrate to the water when sharpening with water to prevent rust on the grinding wheel. Add 10 ml (0.02 pints) of concentrate to 250 ml (0.4 pints) of water (~4%). We recommend always using water when sharpening with diamond grinding wheels if possible, as it both prolongs the service life of the wheel and provides a smoother sharpening surface. You can also sharpen without water.

Why DE-250 Diamond Wheel Extra Fine?

• Diamond grinding wheel for the Tormek T-8.
• Provides an extra smooth finish.
• Constant shape, always maintains the same diameter.
• Sharpens all types of steel and ceramic.
• Allows sharpening on the flat side of the grinding wheel for a completely flat bevel.
• Exceptional durability with diamond, the world’s hardest abrasive.
• Sharpens all materials

With this diamond grinding wheel, you can sharpen all types of materials, including steel, ceramics and carbide. The DE-250 Diamond Wheel Extra Fine fits the Tormek T-8 Original, Tormek T-8 Custom, Tormek T-7 and earlier models with a grinding wheel of 250 mm (9 7/8″) diameter.

The DE-250 Diamond Wheel Extra Fine is especially appreciated by woodcarvers and others who need a mirror finish on the bevel. If you need to give your tool a new edge or shape, it’s best to do that on another grinding wheel first and then use your DE-250 Diamond Wheel Extra Fine to give the final finish.

Simplifies repeat sharpening

All of Tormek’s diamond grinding wheels have exceptional durability and constant abrasive power, which means that they always stay round and flat with a full-size diameter. Users who often sharpen the same tool benefit greatly from this, as it simplifies both jig setting and sharpening.

Get a completely flat bevel

The constant shape makes it possible to sharpen either on the side of the wheel or on its upper surface. Side sharpening is perfect for smaller tools such as knives, chisels, carving gouges and v-tools. The result is an edge with a completely flat bevel, instead of a slightly concave surface.

For sharpening on the side of the diamond grinding wheels, we recommend using the MB-102 Multi Base together with the jig designed for your specific tool. Both the base and the jigs give you support and control throughout the sharpening process.

Rust protection for increased service life

All diamond grinding wheels are supplied with 150 ml of ACC-150 Anti-Corrosion Concentrate. Always add the concentrate to the water when sharpening with water to prevent rust on the grinding wheel. Add 10 ml (0.02 pints) of concentrate to 250 ml (0.4 pints) of water (~4%). We recommend always using water when sharpening with diamond grinding wheels if possible, as it both prolongs the service life of the wheel and provides a smoother sharpening surface. You can also sharpen without water.

The diamond wheel has a grit size of 360 for fast steel removal and is particularly useful for tool shaping.

Why DC-200 Diamond Wheel Coarse?

• Diamond grinding wheel for Tormek T-4
• Fast steel removal to repair or reshape edges.
• Constant shape, always maintains the same diameter.
• Sharpens all types of steel and ceramic.
• Allows sharpening on the side of the grinding wheel to get a completely flat bevel.
• Exceptional durability with diamond, the world’s hardest abrasive.

  A grinding wheel for all materials
  With this diamond wheel, you can sharpen nearly any type of material, including steel, ceramic and carbide. DC-200 Diamond Wheel Coarse fits Tormek T-4 Original, Tormek T-4 Bushcraft, Tormek T-3 and earlier models with a 200 mm diameter grinding wheel.

DC-200 Diamond Wheel Coarse does not leave a fine finish, but should be followed by sharpening with a more fine grained grinding wheel, such as the DF-200 Diamond Wheel Fine or the DE-200 Diamond Wheel Extra Fine.

Simplifies repeat sharpening

All of Tormek’s diamond grinding wheels have exceptional durability with a constant removal rate and shape, which means that they always stay round and flat with a full-size diameter. Users who often sharpen the same tool benefit greatly from this, as it simplifies both setting up and sharpening.

Get a completely flat bevel

The constant shape makes it possible to grind either on the side of the wheel or on its upper surface. Side grinding is perfect for smaller tools such as knives, chisels, carving gouges and v-tools. The result is an edge with a completely flat bevel, instead of a slight hollow grind.

For sharpening on the side of the diamond wheels, we recommend using the MB-102 Multi Base together with the jig designed for your specific tool. Both the base and the jigs give you support and control throughout the sharpening process. If you’re not sure which jig you should use, find out here.

Rust protection for increased service life

All diamond wheels are supplied with 150 ml of ACC-150 Anti-Corrosion Concentrate. Always add the concentrate to the water when sharpening with water to prevent rust on the grinding wheel. Add 10 ml of concentrate to 250 ml water (~4 %). We recommend always using water when sharpening diamond wheels, as it both prolongs the life of the wheel and provides a smoother grinding surface. It is also possible to sharpen without water. Learn more about sharpening with diamond grinding wheels.