This Single Phase power heavy duty SandX 25″ x 60″ single head wide belt sander offers very nice features and performance making it a true leader in its class. A step above for any woodworking shop looking for a small good quality wide belt sander.

The CWI-S2561 begins its list of features with a very strong 7.5 HP TEFC motor powering the combination finishing head with 2″ platen for excellent abrasive finishing of woodworking projects. Tracking trueness of the abrasive sanding belt is done electronically for constant “maintenance free” usage of the belt tracking mechanism. Many competitive machines use pneumatic abrasive belt tracking components which require constant maintenance of diaphragms, pumps and air lines which deteriorate over a period of time. The SandX wide belt sander uses an electronic eye system with micro switches to activate the oscillation of the sanding head to keep the sanding belts tracking properly on the machine.

A really nice feature is the electronic work piece measuring devise. Simply set your work piece on the measurement platform, hold the table rise button till the wood hits the measurement pin, and the machine will automatically set the height at the appropriate level for sanding that work piece. No need for calipers or tape measures. The table will electronically rise and fall with a 1/4 HP motor to easily set the desired height. SandX wide belt sanders also offer electronic limit switches, safety shut down bar and fast acting disc brakes. The machine will automatically stop if you experience a sanding belt breakage.

The variable speed rubber conveyor belt travels at 13-52 feet per minute by a very strong 1 HP feed motor and is controlled by an easy adjust automatic tracking devise. The conveyor table is supported by very heavy duty jack screws for years of trouble free table adjustment and trueness.

SandX wide belt sanders are built with an abundance of quality features to ensure years of exceeding performance…. at a very affordable price.

Features:

• 220 Volt Single Phase Electrics
• 7.5 HP TEFC 220/1/60 Motor
• Combination head with 120mm dia Drum at 75 Durometer with 2″ platen
• 1/4 HP Power Rise and Fall Table
• Automatic Tracking of Conveyor Belt
• 1 HP Conveyor Belt Feed Motor with Variable Speeds of 13′ – 52′ / minute
• Photoelectric Sanding Belt Tracking and Oscillation
• Automatic Disc Brakes in case of belt breakage
• Safety Emergency Push Stop Bar at front of machine
• Centralized Control Panel with Amp Meter
• Electronic Digital Work Piece Thickness Measurement
• Four Pressure Rollers to ensure proper work support
• Sanding Belt Size 25″ x 60″
• Maximum Working Height of 5″
• 2 Dust outlets at 4″ dia
• 53″ X 46″ X 77″ Floor Space
• Machine Weight of 1394 LBS
• CSA Certified

SandX Abrasive machines are built to very high standards for woodworkers needing exceptional performance but still at reasonable value.

The CWI-S3760 begins its list of features with a very strong 15 HP TEFC motor powering the combination finishing head with 2″ platen for excellent abrasive finishing of woodworking projects. Tracking trueness of the abrasive sanding belt is done electronically for constant “maintenance free” usage of the belt tracking mechanism. Many competitive machines use pneumatic abrasive belt tracking components which require constant maintenance of diaphragms, pumps and air lines which deteriorate over a period of time. The SandX wide belt sander uses an electronic eye system with micro switches to activate the oscillation of the sanding head to keep the sanding belts tracking properly on the machine.

Also a very very nice feature is the electronic work piece measuring devise. Simply set your work piece on the measurement platform, hold the table rise button till the wood hits the measurement pin, and the machine will automatically set the height at the appropriate level for sanding that work piece. No need for calipers or tape measures. The table will electronically rise and fall with a 1/3 HP motor to easily set the desired height. SandX wide belt sanders also offer electronic limit switches, safety shut down bar and fast acting disc brakes. The machine will automatically stop if you experience a sanding belt breakage.

The variable speed rubber conveyor belt travels at 13-52 feet per minute by a very strong 1 HP feed motor and is controlled by an easy adjust automatic tracking devise. The conveyor table is supported by very heavy duty jack screws for years of trouble free table adjustment and trueness.

SandX wide belt sanders are built with an abundance of quality features to ensure years of exceeding performance…. at a very affordable price.

Features:

• 220 Volt 3 Phase Electrics as Standard (CWI-S3761 Single Phase is also Available)
• 15 HP TEFC Motor (10 HP on Single Phase Machines)
• Combination head with 120mm dia Drum at 75 Durometer with 2″ platen
• 1/3 HP Power Rise and Fall Table
• 1 HP Feed motor with Variable Speeds of 13′ – 52′ / minute
• Photoelectric Sanding Belt Tracking and Oscillation
• Automatic Disc Brakes in case of belt breakage
• Electronic Work Piece Measuring Devise
• Safety Emergency Push Stop Bar at front of machine
• Centralized Control Panel with Amp Meter
• Six Pressure Rollers to ensure proper work support
• Sanding Belt Size 37″ x 60″
• Maximum Working Height of 6″
• 2 Dust outlets at 4″ dia
• 53″ X 58″ X 77″ Floor Space
• Machine Weight of 1620 LBS
• CSA Certified

SandX Abrasive machines are built to very high standards for woodworkers needing exceptional performance but still at reasonable value.

The CWI-S3761 begins its list of features with a very strong 10 HP TEFC motor powering the combination finishing head with 2″ platen for excellent abrasive finishing of woodworking projects. Tracking trueness of the abrasive sanding belt is done electronically for constant “maintenance free” usage of the belt tracking mechanism. Many competitive machines use pneumatic abrasive belt tracking components which require constant maintenance of diaphragms, pumps and air lines which deteriorate over a period of time. The SandX wide belt sander uses an electronic eye system with micro switches to activate the oscillation of the sanding head to keep the sanding belts tracking properly on the machine.

Also a really nice feature is the electronic work piece measuring devise. Simply set your work piece on the measurement platform, hold the table rise button till the wood hits the measurement pin, and the machine will automatically set the height at the appropriate level for sanding that work piece. No need for calipers or tape measures. The table will electronically rise and fall with a 1/3 HP motor to easily set the desired height. SandX wide belt sanders also offer electronic limit switches, safety shut down bar and fast acting disc brakes. The machine will automatically stop if you experience a sanding belt breakage.

The variable speed rubber conveyor belt travels at 13-52 feet per minute by a very strong 1 HP feed motor and is controlled by an easy adjust automatic tracking devise. The conveyor table is supported by very heavy duty jack screws for years of trouble free table adjustment and trueness.

SandX wide belt sanders are built with an abundance of quality features to ensure years of exceeding performance…. at a very affordable price.

Features:

• 220 Volt Single Phase Electrics as Standard (CWI-S3760 Three Phase is also Available)
• 10 HP TEFC Motor (15 HP on Three Phase Machines)
• Combination head with 120mm dia Drum at 75 Durometer with 2″ platen
• 1/3 HP Power Rise and Fall Table
• 1 HP Feed motor with Variable Speeds of 13′ – 52′ / minute
• Photoelectric Sanding Belt Tracking and Oscillation
• Automatic Disc Brakes in case of belt breakage
• Electronic Work Piece Measuring Devise
• Safety Emergency Push Stop Bar at front of machine
• Centralized Control Panel with Amp Meter
• Six Pressure Rollers to ensure proper work support
• Sanding Belt Size 37″ x 60″
• Maximum Working Height of 6″
• 2 Dust outlets at 4″ dia
• 53″ X 58″ X 77″ Floor Space
• Machine Weight of 1620 LBS
• CSA Certified

SandX Abrasive machines are built to very high standards for woodworkers needing exceptional performance but still at reasonable value.

The CWI-S2975-S1 is available in three phase 220 volt power (M2). This amazing machine starts with a strong 10 HP sanding motor powering the combination finishing head with 2″ platen for excellent abrasive finishing of woodworking projects. Of special note on this machine is the 75” sanding belt length. Most 25”-37” wide belt sanders use 48”-60” sanding belt lengths. Only the real heavy duty sanders use 75” length. The extra length accomplishes two things. First the extra length means the belts will run cooler as they have more time for the belt surface to rotate. Second the frame and structure of the machine are built much heavier to support the larger belt meaning a far better built machine. The shorter belt length machines are simply built to save costs…. not for performance! Tracking trueness of the abrasive sanding belt is done electronically for constant “maintenance free” usage of the belt tracking mechanism. Many competitive machines use pneumatic abrasive belt tracking components which require constant maintenance of diaphragms, pumps and air lines which deteriorate over a period of time. The SandX wide belt sander uses an electronic eye system with micro switches to activate the oscillation of the sanding head to keep the sanding belts tracking properly on the machine.

One of the exclusive features on the SandX wide belt sander is the abrasive belt cleaning devise on the sanding head. This air jet cleaning feature ensures better sanding belt life whether you are using cloth or paper belts by blowing dust free from the belts abrasive surface while at the same time keeping the belt at a cool temperature to ensure less break down of the sanding material.
Also a very important feature is the electronic work piece measuring devise. Simply set your work piece on the measurement platform and the machine will automatically raise to the height for the appropriate level for sanding that work piece. No need for calipers or tape measures. The table rise/fall motor is a 1/2 HP motor which can also be operated manually with push buttons to set the desired height with a digital controller and height read out. Measurements can be set in either metric or imperial measurement.

SandX wide belt sanders also offer electronic limit switches, safety shut down bar and fast acting disc brakes. The machine will automatically stop if you experience a sanding belt breakage.

The variable speed rubber conveyor belt travels at 13-65 feet per minute by a very strong 1 HP feed motor and is controlled by an easy adjust automatic tracking devise. The conveyor table is supported by very heavy duty jack screws for years of trouble free table adjustment and trueness.

SandX wide belt sanders are built with an abundance of quality features to ensure years of exceeding performance…. at a very affordable price.

Features:

• M2- 10HP 220/3/60 Electrics
• Combination Finishing head with 120mm dia Drum at 70 Durometer with 2″ platen
• 1/2 HP Power Rise and Fall Table
• Automatic Tracking of Conveyor Belt
• 1 HP Conveyor Belt Feed Motor with Variable Speeds of 13′ – 65′ / minute
• Photoelectric Sanding Belt Tracking and Oscillation
• Wrenchless Adjustment of Sanding Belt Tracking
• Automatic Disc Brakes in case of belt breakage
• Safety Emergency Push Stop Bar at front of machine
• Centralized Control Panel with Amp Meter
• Electronic Automatic Digital Height Controller (metric or imperial)
• Electronic Digital Work Piece Thickness Measurement
• Air Jet Belt Cleaning and Cooling
• Four Pressure Rollers to ensure proper work support
• Sanding Belt Size 29″ x 75″
• Sanding Working Width 27.5”
• Maximum Working Height of 6.25″
• Dual 4” Dust outlets
• Required Air Pressure .6MPa
• Required Dust Collection 2000CFM
• Machine Weight of 2650 LBS
• Dimensions 57” x 65” x 76”
• CSA Certified

SandX Abrasive machines are built to very high standards for woodworkers needing exceptional performance but still at reasonable value.

The CWI-S2975-S2 is a three phase 220 volt power (M2) two head wide belt sander. This amazing machine features separate motors for each sanding head. The r machine features a 15 HP motor on the first contact sanding head and a 10 HP motor on the combination finishing head with platen. The use of two separate heads will increase production times by being able to sand with two different grits of abrasive at the same time. The first contact head can also be lifted to not have contact with the work piece for fine finishing applications or as well can be adjusted to ensure correct calibration of the two sanding head heights.

Of special note on this machine is the 75” sanding belt length. Most 25”-37” wide belt sanders use 48”-60” sanding belt lengths. Only the real heavy duty sanders use 75” length. The extra length accomplishes two things. First the extra length means the belts will run cooler as they have more time for the belt surface to rotate. Second the frame and structure of the machine are built much heavier to support the lager belt meaning a far better built machine. The shorter belt length machines are simply built to save costs…. not for performance! Tracking trueness of the abrasive sanding belt is done electronically for constant “maintenance free” usage of the belt tracking mechanism. Many competitive machines use pneumatic abrasive belt tracking components which require constant maintenance of diaphragms, pumps and air lines which deteriorate over a period of time. The SandX wide belt sander uses an electronic eye system with micro switches to activate the oscillation of the sanding head to keep the sanding belts tracking properly on the machine.

One of the exclusive features on the SandX wide belt sander is the abrasive belt cleaning devise on both sanding heads. This air jet cleaning feature ensures better sanding belt life whether you are using cloth or paper belts by blowing dust free from the belts abrasive surface while at the same time keeping the belt at a cool temperature to ensure less break down of the sanding material.

Also a very important feature is the electronic work piece measuring devise. Simply set your work piece on the measurement platform and the machine will automatically raise to the height for the appropriate level for sanding that work piece. No need for calipers or tape measures. The table rise/fall motor is a 1/2 HP motor which can also be operated manually with push buttons to set the desired height with a digital controller and height read out. Measurements can be set in either metric or imperial measurement.

SandX wide belt sanders also offer electronic limit switches, safety shut down bar and fast acting disc brakes. The machine will automatically stop if you experience a sanding belt breakage.

The variable speed rubber conveyor belt travels at 13-65 feet per minute by a very strong 2 HP feed motor and is controlled by an easy adjust automatic tracking devise. The conveyor table is supported by very heavy duty jack screws for years of trouble free table adjustment and trueness.

SandX wide belt sanders are built with an abundance of quality features to ensure years of exceeding performance…. at a very affordable price.

Features:

• M2- Contact Head 15 HP – Finishing Head 10HP 220/3/60 Electrics
• Contact Head 140mm Dia Steel Drum
• Combination Finishing head with 120mm Dia Rubber Drum at 70 Durometer with 2″ platen
• 1/2 HP Power Rise and Fall Table
• Automatic Tracking of Conveyor Belt
• 2 HP Conveyor Belt Feed Motor with Variable Speeds of 13′ – 65′ / minute
• Photoelectric Sanding Belt Tracking and Oscillation
• Wrenchless Adjustment of Sanding Belt Tracking
• Automatic Disc Brakes in case of belt breakage
• Safety Emergency Push Stop Bar at front of machine
• Centralized Control Panel with Amp Meter
• Electronic Automatic Digital Height Controller (metric or imperial)
• Electronic Digital Work Piece Thickness Measurement
• Air Jet Belt Cleaning and Cooling
• Four Pressure Rollers to ensure proper work support
• Sanding Belt Size 29″ x 75″
• Sanding Working Width 27.5”
• Maximum Working Height of 6.25″
• Four 4” Dust outlets
• Required Air Pressure .6MPa
• Required Dust Collection 2600CFM
• Machine Weight of 2650 LBS
• Dimensions 57” x 77” x 76”
• CSA Certified

SandX Abrasive machines are built to very high standards for woodworkers needing exceptional performance but still at reasonable value.

The CWI-S3875-S1-M2 is an amazing machine with a strong 20 HP 220 volt three phase sanding motor powering the combination finishing head with 2″ platen for excellent abrasive finishing of woodworking projects. Of special note on this machine is the 75” sanding belt length. Many 37”-38” wide belt sanders use 60” sanding belt lengths. Only the real heavy duty sanders use 75” length. The extra length accomplishes two things. First the extra length means the belts will run cooler as they have more time for the belt surface to rotate. Second the frame and structure of the machine are built much heavier to support the larger belt meaning a far better built machine. The shorter belt length machines are simply built to save costs…. not for performance! Tracking trueness of the abrasive sanding belt is done electronically for constant “maintenance free” usage of the belt tracking mechanism. Many competitive machines use pneumatic abrasive belt tracking components which require constant maintenance of diaphragms, pumps and air lines which deteriorate over a period of time. The SandX wide belt sander uses an electronic eye system with micro switches to activate the oscillation of the sanding head to keep the sanding belts tracking properly on the machine.

One of the exclusive features on the SandX wide belt sander is the abrasive belt cleaning devise on the sanding head. This air jet cleaning feature ensures better sanding belt life whether you are using cloth or paper belts by blowing dust free from the belts abrasive surface while at the same time keeping the belt at a cool temperature to ensure less break down of the sanding material.
Also a very important feature is the electronic work piece measuring devise. Simply set your work piece on the measurement platform and the machine will automatically raise to the height for the appropriate level for sanding that work piece. No need for calipers or tape measures. The table rise/fall motor is a 1/2 HP motor which can also be operated manually with push buttons to set the desired height with a digital controller and height read out. Measurements can be set in either metric or imperial measurement.

SandX wide belt sanders also offer electronic limit switches, safety shut down bar and fast acting disc brakes. The machine will automatically stop if you experience a sanding belt breakage.

The variable speed rubber conveyor belt travels at 13-65 feet per minute by a very strong 2 HP feed motor and is controlled by an easy adjust automatic tracking devise. The conveyor table is supported by very heavy duty jack screws for years of trouble free table adjustment and trueness.

SandX wide belt sanders are built with an abundance of quality features to ensure years of exceeding performance…. at a very affordable price.

Features:

• M2- 20 HP 220/3/60 Electrics
• Combination Finishing head with 120mm dia Drum at 70 Durometer with 2″ platen
• 1/2 HP Power Rise and Fall Table
• Automatic Tracking of Conveyor Belt
• 2 HP Conveyor Belt Feed Motor with Variable Speeds of 13′ – 65′ / minute
• Photoelectric Sanding Belt Tracking and Oscillation
• Wrenchless Adjustment of Sanding Belt Tracking
• Automatic Disc Brakes in case of belt breakage
• Safety Emergency Push Stop Bar at front of machine
• Centralized Control Panel with Amp Meter
• Electronic Automatic Digital Height Controller (metric or imperial)
• Electronic Digital Work Piece Thickness Measurement
• Air Jet Belt Cleaning and Cooling
• Four Pressure Rollers to ensure proper work support
• Sanding Belt Size 38″ x 75″
• Sanding Working Width 37.5”
• Maximum Working Height of 6.25″
• Dual 4” Dust outlets
• Required Air Pressure .6MPa
• Air Consumption 12m3/h
• Required Dust Collection 2000CFM
• Machine Weight of 3750 LBS
• Dimensions 66” x 65” x 76”
• CSA Certified

SandX Abrasive machines are built to very high standards for woodworkers needing exceptional performance but still at reasonable value.

The CWI-S4086-S2-M2 available in three phase power only features separate motors for each sanding head. The first contact head has a 20 HP sanding motor for heavier stock removal while the second finishing head with 2” platen uses a 15 HP sanding motor. The use of two separate heads will increase production times by being able to sand with two different grits of abrasive at the same time. The first contact head can also be lifted to not have contact with the work piece for fine finishing applications or as well can be adjusted to ensure correct calibration of the two sanding head heights.

Of special note on this machine is the almost 40” sanding working width capacity as well as the extra-long 86 5/8” sanding belt length. Most wide belt sanders in this category use 60”-75” sanding belt lengths. The SandX CWI-WBS4086 sander uses an 86 5/8” belt length like other European made heavy duty sanders. The extra length accomplishes two things. First the extra length means the belts will run cooler as they have more time for the belt surface to rotate. Second the frame and structure of the machine are built much heavier to support the lager belt meaning a far better built machine. Tracking trueness of the abrasive sanding belt is done electronically for constant “maintenance free” usage of the belt tracking mechanism. Many competitive machines use pneumatic abrasive belt tracking components which require constant maintenance of diaphragms, pumps and air lines which deteriorate over a period of time. The SandX wide belt sander uses an electronic eye system with micro switches to activate the oscillation of the sanding head to keep the sanding belts tracking properly on the machine.

One of the exclusive features on the SandX wide belt sander is the abrasive belt cleaning devise on both sanding heads. This air jet cleaning feature ensures better sanding belt life whether you are using cloth or paper belts by blowing dust free from the belts abrasive surface while at the same time keeping the belt at a cool temperature to ensure less break down of the sanding material.

Also a very important feature is the electronic work piece measuring devise. Simply set your work piece on the measurement platform and the machine will automatically raise to the height for the appropriate level for sanding that work piece. No need for calipers or tape measures. The table rise/fall motor is a 1/2 HP motor which can also be operated manually with push buttons to set the desired height with a digital controller and height read out. Measurements can be set in either metric or imperial measurement.

SandX wide belt sanders also offer electronic limit switches, safety shut down bar and fast acting disc brakes. The machine will automatically stop if you experience a sanding belt breakage.

The variable speed rubber conveyor belt travels at 16-81 feet per minute by a very strong 2 HP feed motor and is controlled by an easy adjust automatic tracking devise. The conveyor table is supported by very heavy duty jack screws for years of trouble free table adjustment and trueness.

SandX wide belt sanders are built with an abundance of quality features to ensure years of exceeding performance…. at a very affordable price.

Features:

• M2- Contact Head 20 HP – Finishing Head 15HP 220/3/60 Electrics
• Contact Head 190mm Dia Steel Drum
• Combination Finishing head with 160mm Dia Rubber Drum at 70 Durometer with 2″ platen
• 1/2 HP Power Rise and Fall Table
• Automatic Tracking of Conveyor Belt
• 2 HP Conveyor Belt Feed Motor with Variable Speeds of 16′ – 81′ / minute
• Photoelectric Sanding Belt Tracking and Oscillation
• Wrenchless Adjustment of Sanding Belt Tracking
• Automatic Disc Brakes in case of belt breakage
• Safety Emergency Push Stop Bar at front of machine
• Centralized Control Panel with Amp Meter
• Electronic Automatic Digital Height Controller (metric or imperial)
• Electronic Digital Work Piece Thickness Measurement
• Air Jet Belt Cleaning and Cooling
• Four Pressure Rollers to ensure proper work support
• Sanding Belt Size 40″ x 86 5/8″
• Sanding Working Width 39.5”
• Maximum Working Height of 6.25″
• Four 5” Dust outlets
• Required Air Pressure .6MPa
• Required Dust Collection 3600CFM
• Machine Weight of 5050 LBS
• Dimensions 70” x 85” x 82”
• CSA Certified

This  heavy duty SandX 25″ x 60″ single head wide belt sander is available in both single phase and three phase power offering more features and performance than any other sander in its class. A true step above for any woodworking shop looking for a small good quality wide belt sander.

The CWI-S2560/1 begins its list of features with a very strong 7.5 HP TEFC single phase motor (Optional 10 HP Three Phase) powering the combination finishing head with 2″ platen for excellent abrasive finishing of woodworking projects. Tracking trueness of the abrasive sanding belt is done electronically for constant “maintenance free” usage of the belt tracking mechanism. Many competitive machines use pneumatic abrasive belt tracking components which require constant maintenance of diaphragms, pumps and air lines which deteriorate over a period of time. The SandX wide belt sander uses an electronic eye system with micro switches to activate the oscillation of the sanding head to keep the sanding belts tracking properly on the machine. There is a very simple belt tracking adjustment on this machine in which the operator simply rotates a lever from side to side to properly tension the sanding belt for tracking. For sanding belt safety there are micro switches at each side of the belt which will activate the disc brakes immediately if the belt travels too far left or right.

Another very important feature is the electronic work piece measuring devise. Simply set your work piece on the measurement platform, hold the table rise button till the wood hits the measurement pin, and the machine will automatically set the height at the appropriate level for sanding that work piece. No need for calipers or tape measures. The table will electronically rise and fall with a 1/4 HP motor to easily set the desired height. Measurements are available in either metric or imperial measurement. SandX wide belt sanders also offer electronic limit switches, safety shut down bar and fast acting disc brakes. The machine will automatically stop if you experience a sanding belt breakage. The variable speed rubber conveyor belt travels at 13-52 feet per minute by a very strong 1 HP feed motor and is controlled by an easy adjust automatic tracking devise. The conveyor table is supported by very heavy duty jack screws for years of trouble free table adjustment and trueness. SandX wide belt sanders are built with an abundance of quality features to ensure years of exceeding performance…. at a very affordable price.

Specifications:

• 220 Volt Sing Phase or Three Phase Electrics
• 7.5 HP TEFC single phase motor or 10 HP TEFC 220/3/60 Motor (50 amp Total Power)
• Combination head with 100mm dia Drum at 75 Durometer with 2″ platen
• 1/4 HP Power Rise and Fall Table
• Automatic Tracking of Conveyor Belt
• 1 HP Conveyor Belt Feed Motor with Variable Speeds of 13′ – 52′ / minute
• Photoelectric Sanding Belt Tracking and Oscillation
• Easy Adjust Belt Tracking with Single Lever
• Automatic Disc Brakes in case of belt breakage
• Safety Emergency Push Stop Bar at front of machine
• Centralized Control Panel with Amp Meter
• Electronic Digital Work Piece Thickness Measurement
• Rubber Pressure Rollers to ensure proper work support
• Sanding Belt Size 25″ x 60″
• Maximum Working Height of 5″
• 2 Dust outlets at 4″ dia
• 40″ X 48″ X 66″ Floor Space
• Machine Weight of 1394 LBS
• Shipping Crate 45″ x 53″ x 76″
• CSA Certified