SawStop along with Canadian Woodworker is proud to support The Skills Competition Groups across Canada. These demo units have been used at these events and are now available at a special educational sale price. Limited stock available at this sale price. Contact us for a shipping quote. 

The Professional Cabinet Saw (PCS) is an extremely well built table saw for use in education or home shops for customers looking for unparalleled safety and quality of saw. The PCS saws have three different fence options and two motor options. When ordering your saw first choose the motor size you wish to purchase and then the fence cutting capacity which will work best in your shop.

A fast-acting brake stops the blade when contact is detected. The brake includes a heavy-duty spring to push a block of aluminum, called a brake pawl, into the teeth of the blade to stop the blade from spinning. The spring is held in compression by a fuse wire until contact is detected. When contact is detected, the system sends a surge of electricity through the fuse wire to burn the wire and release the spring. The spring pushes the brake pawl into the teeth of the spinning blade, and the teeth cut into the aluminum and bind, thereby stopping the blade. All this happens in about 5 milliseconds, or 1/200th of a second. At the same time, the angular momentum of the blade causes the blade to retract below the table and the power to the motor is shut off. The optional brake cartridges are single-use components that must be changed if the brake is ever activated. Changing a brake cartridge is fast and easy, no more complicated than changing the blade.

A very nice blade guard designed specifically for the Professional Cabinet Saw features independent lateral sides to minimize exposure to the blade. It retains a low profile to allow for cuts as narrow as 3/4 of an inch. Riving knife minimizes kickback and provides protection during non-through cuts. We double-check the saw every time you turn it on with a diagnostic self-check which runs when you start the saw to ensure all systems are ready to detect an accident. If any problem is detected, the system will not allow the saw to start. Sometimes you have your hands full and really need to stop the blade. Our large start/stop paddle with hands-free shutoff can be pushed with your knee allowing you to safely stop the blade.

Never worry again about someone using your saw when you’re not around. The main power switch with lockout key prevents unauthorized users from operating the saw. When the power goes out, the saw stays off. The safety system won’t allow the motor to restart automatically when the power comes back on.

Left-tilting blade prevents wood from binding against the fence. A sophisticated dust shroud draws sawdust away from the blade and funnels it through a 4″ tube to a port at the rear of the cabinet. Effectively redirects dust away from the saw even when not attached to a dust collection system. Quick-release, zero-clearance insert provides support throughout the cut reducing tear out and chip out. The tool-free quick release makes removing the insert for blade or guard changes a breeze. A positive latching mechanism lets you know the insert is securely in place.

The 27″ deep extension table is compatible with popular after-market accessories including a router table extension.

Ample and easy access inside the cabinet. Three doors in the cabinet make it easy to get to all adjustment points on both sides of the trunnion.

Inconvenience is the enemy of safety. We made it easy to change between blade guard and riving knife with our tool-free blade guard quick change mechanism. Operators can remove the insert and make blade changes quickly with no tools required, minimizing disruptions to workflow. The safety bypass switch allows users to cut conductive material without activating the brake. Since the bypass has to be turned on every time the blade is started, you don’t have to remember to turn off the bypass system when you’re done.

Precise elevation changes made easy. The gas-assisted vertical elevation system is located close to the internal structure’s center of gravity, making fine-tuning smooth and easy. The elevation system operates on a vertical slide rather than on an arc providing you with repeatability and consistent alignment. Blade height is proportional to handle turns at all elevations. Mechanical adjustment points on the trunnion enable the operator to make micro adjustments, ensuring exact blade alignment at all bevel angles.

Models Available are:

• PCS31230-TGP236 – SAWSTOP 3HP 220V 10″PROFESSIONAL CABINET SAW 36″ RAIL, FENCE AND TABLE BOARD ASSEMBLY

Specifications:

• Footprint: 85 1/4″ w x 33″ d x 34″ h (w/ Pro-Glide Fence System & 52″ rails)
• Cabinet footprint: 19 3/8″ w x 19 3/8″ d
• Cast iron table: 20″ w x 27″ d, 44″ w x 27″ d (w/ extension wings)
• Extension table 40 1/8″ w x 27″ d (52″ rails)
• Weights: 265 lbs (table saw only) 449 lbs (with T-Glide Fence System & 52″ rails)
• Blade: 40-tooth, professional grade, 5/8″ arbor
• Blade diameter: 10″
• Blade tilt: Left
• Max. depth of cut, blade at 0° 3 1/8″
• Max. depth of cut, blade at 45° 2 1/4″
• Max. rip, right of blade: 52″ (with optional 52″ rails)
• Max. rip, left of blade:12″
• Dado diameter: 8″ (requires a separate brake cartridge and table insert)
• Dado max. width: 13/16″
• Arbor diameter at blade: 5/8″
• Table in front of blade (max. elevation): 10 1/4″
• Dust collection port diameter: 4″
• Riving knife / splitter thickness: 0.078″ (2mm)
• Blade guard: polycarbonate, extends only 5/8″ to right of blade
• Insert: zero clearance, steel core, ABS surfaces
• Hand wheels: 7″ diameter, cast iron with chrome handle
• Belts: 2 V-ribbed belts – arbor belt is static dissipative

The F1 features an Overhead SMART Digital Controller, which electronically sets the blade height, blade angle, and rip fence position for fast, repeatable setup and minimal operator effort. With a push of a button the operator can start/stop both saw blades independently, raise/lower the saw blade, tilt the saw blades and move the fence system to precision settings and measurements.

Saw blade tilting from 0° to 45° is controlled by a 750W Delta servo motor with a heavy-duty ballscrew system, while the massive cast iron trunnion system delivers outstanding rigidity and vibration-free performance. Main saw blade elevation is driven by a 400W Delta servo motor, while the rip fence positioning is powered by an additional 400W Delta servo motor and ballscrew system, providing smooth, extremely accurate and repeatable accurate adjustments every time.

At the heart of the machine is a powerful 7.5 HP, 220 Volt, Three Phase main motor paired with a 1 HP scoring motor, providing clean, chip-free cuts in melamine, plywood, MDF, hardwoods, and composite materials. The saw accepts 12″ to 16″ diameter main blades with a 30mm bore and dual 10mm pin holes, along with a 120mm x 20mm scoring blade. Three selectable main blade speeds of 3000, 4000, and 5000 RPM allow the saw to be optimized for different blade sizes and materials, while the 8000 RPM scoring blade ensures flawless finishes on laminated panels with a 16” blade the saw is capable of cutting material up to 4-15/16″ thick.

The heavy-duty 3200mm x 430mm aluminum sliding table offers a generous 126″ cutting stroke, allowing effortless handling of full-size sheet goods with exceptional accuracy. A robust outrigger support stabilizes large panels during cutting, while the crosscut fence features three flip stops with ELGO digital readouts for fast, repeatable dimensioning. Additional conveniences include an eccentric hold-down clamp for securing workpieces and a push bar for smooth operation of the sliding table.

The Euro-style swing-away transparent blade guard provides excellent visibility while incorporating an 80mm dust port for effective dust extraction. There are two detachable sides of the guard, one for 90 degree cutting and a second for angled cutting to allow the blade tilt.

A 4″ main dust inlet leads to an enclosed cavity around the sawblades to further enhance dust collection to help maintain a cleaner work environment.

The Stallion F1 includes large side and rear metal extension tables for improved workpiece support during oversized cuts. Premium CSA-certified Siemens and Schneider electrical components ensure dependable performance and long-term reliability. Completing the machine is integrated LED under glow lighting, which automatically illuminates when the saw is operating, adding both safety and a distinctive modern appearance.

Built for shops that demand uncompromising accuracy, intelligent automation, and industrial-grade durability, the Stallion F1 Deluxe 10′ Sliding Panel Saw is a high-performance solution designed to maximize productivity while delivering exceptional cutting precision on every project.

Specifications:

• Overhead SMART Digital Controller (Sets blade height, angle and rip fence position)
• 5 HP 220 Volt Three Phase Main Motor
• 1 HP Scoring Motor
• 12”-16” Dia. Main Saw Blade Capacity w/ 30mm Bore and Two 10mm Pin Holes
• 120mmx 20mm Scoring blade (not included)
• 3000/4000/5000 RPM Main Blade (3 Speeds Depending on Blade Size)
• 8000 RPM Scoring Blade
• Blade Tilt Degree: 0-45
• Massive Cast Iron Trunnion System
• Main Blade Rise/Fall Mechanism Powered by a 400w Delta Servo Motor
• Blade Angle Positioning Powered by a 750w Delta Servo Motor & Heavy Duty Ballscrew
• Rip Fence Positioning Powered by a 400w Delta Servo Motor and Ballscrew assembly for extreme accuracy
• Heavy Duty 3200mm x 430mm Aluminum Sliding Table
• Heavy Duty Outrigger for Large Panel Support
• Crosscut Fence with 3 Flip Stops with ELGO Digital Readouts
• ”Euro” Swing Away See Through Blade Guard w/80mm Dust Port
• Sliding Table Cutting Stroke: 126″
• Max Cutting Thickness with 16” main blade: 4-15/16″
• Large Side and Rear Metal Extension Tables
• CSA Certified Electrics from Siemens & Schneider
• Eccentric Hold Down Clamp
• Push Bar for Sliding table
• 4” Dust Inlet Diameter
• LED Under Glow Lighting (Activates when the saw is in operation)

The CWI-B3218 offers 20” of resaw capacity, a heavy duty double welded steel frame, 7.5 HP three phase motor and solid cast iron disc (not spoked) 32” wheels expertly balanced on sealed for life heavy duty bearings. A large bristle brush is mounted on the lower wheel to help keep the tires clean and extending their life. The worktable area is a 27.5” x 40” heavy ribbed cast iron table (27.5” x 33” Main cast table and 27.5” x 7” Auxiliary cast table) which sits atop a heavy steel trunnion system with adjustment for up to 45 degree tilting of the table. A 3/8” x ¾” miter guide slot is standard for use with most miter gauges. The heavy duty double ball bearing blade guides are robust and easy to adjust for any sawing needs from fine finish work, veneer cutting or heavy resawing. Bandsaw blade changes are eased with the help of a hinged blade guard above the bandsaw guides. The guides easily rise and fall with use of a large handwheel and a rack and pinion drive system.

A Stallion “Drift Adjust” cast iron body with 6” tall aluminum rail bandsaw fence allows for simple tool less adjustments to compensate for blade drift. A resaw drift bar is also included on the fence. A blade tension indicator is standard for up to 35mm blade width.

Safety features include magnetic safety switch with overload and under voltage protection and micro switch protected doors which will not allow the saw to start if the doors are open or if the door is opened during operation the saw will shut down. A foot brake to speed stopping times is also included and features a safety micro switch that shuts off the power when activated. Also a really nice feature is the LED light bar which lights up the entire work area with very bright light…..a really nice feature for older eyes.

Dust collection on the Stallion HD band saw is easily performed with dual 4” dust inlets. The side inlet which sits just under the lower blade guides has a wooden insert to help capture most of the dust before entering the frame of the saw where the second 4” inlet is placed.

The Stallion HD Series of Band Saws are truly in a class of their own, built with the attitude, grace, strength, performance and beauty you would expect…. from a Stallion!

• 7.5 HP 220/3/60HZ Motor
• 224.5” Band Saw Blade (not included)
• Blade Capacity is 3/8” – 1.25”
• Solid Cast Iron 32” Diameter Wheels
• Resaw Height of 20” under Blade Guides
• 31” Max Cutting Width
• Heavy Duty Double Ball Bearing Blade Guides
• Very Bright LED Light Bar Aluminates Work Area
• Magnetic Safety Switch w/overload and under voltage protection
• Micro Switch Protected Doors
• Foot Brake w/Micro Switch motor kill
• Stallion “Drift” adjustable Fence
• Blade Tension Indicator Gauge
• Easy Access Hinged Blade Guard
• Heavy Rack and Pinion Guide Height Adjustment
• Huge 27.5” x 40” Cast Iron Table (Includes: 27.5” x 33” Main Cast Table & 27.5” x 7” Auxiliary Cast Table)
• Robust Welded Steel Table Trunnion System
• Table Tilt 0-45 Deg.
• Table Height 40”
• Two 4” Dust Inlets
• CSA Certification
• Shipping Size 57” x 35.5” x 101”
• Net Weight 450kg
• Shipping Weight 470kg

The CWI-B2818 offers 18” of resaw capacity, a heavy duty double welded steel frame, 5.5 HP three phase motor and solid cast iron disc (not spoked) 28” wheels expertly balanced on sealed for life heavy duty bearings. A large bristle brush is mounted on the lower wheel to help keep the tires clean and extending their life. The worktable area is a 27.5” x 38” heavy ribbed cast iron table (Includes: 27.5” x 33” Main Cast Table and 27.5” x 5” Auxiliary Cast Table) which sits atop a heavy steel trunnion system with adjustment for up to 45 degree tilting of the table. A 3/8” x ¾” miter guide slot is standard for use with most miter gauges. The heavy duty double ball bearing blade guides are robust and easy to adjust for any sawing needs from fine finish work, veneer cutting or heavy resawing. Bandsaw blade changes are eased with the help of a hinged blade guard above the bandsaw guides. The guides easily rise and fall with use of a large handwheel and a rack and pinion drive system.

A Stallion “Drift Adjust” cast iron body with 6” tall aluminum rail bandsaw fence allows for simple tool less adjustments to compensate for blade drift. A resaw drift bar is also included on the fence. A blade tension indicator is standard for up to 35mm blade width.

Safety features include magnetic safety switch with overload and under voltage protection and micro switch protected doors which will not allow the saw to start if the doors are open or if the door is opened during operation the saw will shut down. A foot brake to speed stopping times is also included and features a safety micro switch that shuts off the power when activated. Also a really nice feature is the LED light bar which lights up the entire work area with very bright light…..a really nice feature for older eyes.

Dust collection on the Stallion HD band saw is easily performed with dual 4” dust inlets. The side inlet which sits just under the lower blade guides has a wooden insert to help capture most of the dust before entering the frame of the saw where the second 4” inlet is placed.

The Stallion HD Series of Band Saws are truly in a class of their own, built with the attitude, grace, strength, performance and beauty you would expect…. from a Stallion!

• 5.5 HP 220/3/60HZ Motor
• 201.5” Band Saw Blade (not included)
• Blade Capacity is 3/8” – 1.25”
• Solid Cast Iron 28” Diameter Wheels
• Resaw Height of 18” under Blade Guides
• 27” Max Cutting Width
• Heavy Duty Double Ball Bearing Blade Guides
• Very Bright LED Light Bar Aluminates Work Area
• Magnetic Safety Switch w/overload and under voltage protection
• Micro Switch Protected Doors
• Foot Brake w/Micro Switch motor kill
• Stallion “Drift” adjustable Fence
• Blade Tension Indicator Gauge
• Easy Access Hinged Blade Guard
• Heavy Rack and Pinion Guide Height Adjustment
• Huge 27.5” x 38” Cast Iron Table (Includes: 27.5” x 33” Main Cast Table & 27.5” x 5” Auxiliary Cast Table)
• Robust Welded Steel Table Trunnion System
• Table Tilt 0-45 Deg.
• Table Height 36.5”
• Two 4” Dust Inlets
• CSA Certification
• Shipping Size 52.5” x 35.5” x 96.5”
• Net Weight 390kg
• Shipping Weight 420kg

Features:

• 15-Amp saw with 3,800 rpm for rip-cutting and cross-cutting of fine and hard wood materials
• Convenience brake – helps blade stop in approximately three seconds, increasing productivity
• Clampzone areas – allow tabletop to be used as a light-duty, secondary work surface
• Open frame design – equipped with open frame roll bar and lightweight construction for durability
• Soft-start circuitry – manages intensity of motor start-up and minimizes the possibility of tripping a circuit breaker
• Electronically regulated speed – helps maintain speed under load
• Portability – works seamlessly with the included lighter GTA50W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• Rack and pinion rip fence – features color-coded index pins that correlate with matching color-coded scale for easy adjustments by hand dial
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• On-tool storage – stores the rip fence, miter gauge, Smart Guard System, hex wrench, blade wrench and push stick on the tool

The XS series bandsaws deliver consistent performance for everything from fine curve-cutting to heavy resawing applications with an admirable 13” cutting height, while utilizing common sized 117” bandsaw blades. The machine’s extra robust 14″ solid cast-iron wheels provide exceptional inertia and vibration dampening, improving cut stability and overall smoothness.

Bandsaw Safety:

Whether being used at home or in a commercial or educational shop, every detail of the XS bandsaws is designed to provide the ultimate in safety for all users. Not only are both doors protected with Omron safety switches, the XS saws are the first 14” bandsaws to offer keyed, lockable doors. With the use of the micro switches, the machine cannot be operated if either of the doors are left open. Having keyed locks on both doors gives the user the option to lock out access to the machines inner workings, creating a secure operating environment without sacrificing convenience for blade changes or maintenance.

The rack and pinion, adjustable height blade guard, fully encloses the blades on all sides maximizing operator safety. The XS machines are operated with a magnetic safety switch assembly with on/off and a keyed lockable emergency stop button. Having the keyed lockable E-Stop allows users to lock out the operation of the machine when not in use. Using a magnetic safety switch means that if power is lost to the machine, it cannot start up again without the operator pushing the start button.

Also included on the XS Series bandsaw is an emergency stop foot brake system that utilizes Shunan disc brakes, which allows the user to shut down operation instantly when needed.

Performance Features:

For resaw work, the saws come outfitted with a deluxe, dual position, (short/tall) 6″ resaw fence and T-Square rail system, ensuring straight, repeatable cuts even on challenging stock. The generously sized 21″ x 17″ cast table, tilting from 0 to 45 degrees, gives operators the space and flexibility required for bevel cuts, compound angles, and larger workpieces.

To keep the workspace clean and efficient, the Stallion XS saws integrate a dual dust outlet system with one port directly enclosing the blade area under the table, and a second 4″ port at the base of the lower cabinet, allowing the machine to be very adaptable for dust removal.

The Xtra Special dual ball bearing blade guides are a fully “tool less”, simple to adjust guide system. Simply loosen the locking thumb screw and rotate the eccentric adjust bearing left or right and re-tighten when in position. The rear bearing is adjusted the same way with the face of the bearing, not the side of the bearing, providing support to the blade. To remove or install blades the XS machines are featured with a quick release tension arm, making for simple blade changes. Tension adjustments are performed at the top of the machine with a large four wing adjustment wheel. Adjustments for tracking the blade, locking the blade guide height, and adjusting the blade guide height are all provided with large easy to use machined handwheels. There are two viewing windows for easier blade adjustments.

For better sightlines while working the machine, a Nikki LED light strip with its own on/off switch is standard equipment to brighten the entire working area.

Included Extra Features:

The saw is standard equipped with an “extra wide-base” heavy-duty mobility kit, allowing easy relocation around the shop without compromising stability during use. Additional premium features—such as the deluxe miter gauge and integrated LED work light come standard, adding value and convenience right out of the crate.

With a net weight of 148 kg and a shipping weight of 172 kg, the band saw is built for strength and durability without being unmanageable. The Stallion XS Series Band Saws stand as a powerhouse purpose-built machine by CWI Woodworking Technologies, for woodworkers who seek superior performance, advanced safety, and uncompromising quality in every cut.

Specifications:

• CWI-B1413-XS225 Motor 2HP 220v 1-Phase 60Hz 9 amp
• CWI-B1413-XS175 Motor 1.75 HP 110v 1-Phase 60Hz 15 amp
• Blade Length: 117″
• Blade Width Capacity: 3/16″ – 1″
• Blade Speed: 50ft/s
• Resaw Capacity: 13″
• Quick Tension Release Arm
• Blade Adjustment Viewing Windows
• 14″ Extra Robust Solid Cast Iron Wheels
• Magnetic on/off Safety Switch
• Keyed Locking E-Stop
• Micro Switch Protected Doors and Foot Brake
• Emergency Stop Foot Brake
• Shunan Fast Acting Disc Brake System
• Fully enclosed blade guard
• “Tool Less” Dual Ball Bearing Blade Guides
• Rack and Pinion Blade Guide Height Adjustment
• Deluxe 6″ Low/Tall Resaw Fence & T-Square Rail System
• Cast Iron Table Size: 21″ x 17″
• Table Tilt: 0 – 45 Degrees
• Dual Dust Intake with 4”Outlet
• Heavy Duty Extra Wide Mobility Kit Included
• Miter Gauge Included
• Integrated Nikki LED Light Included
• Net Weight: 148kg
• Shipping Weight: 172kg
• Shipping Dimensions: 26.7″ x 20.4″ x 75.45″

This panel saw can travel to work sites and fit into shops with limited floor space. The only difference between this machine and the C4 Panel saw are the maximum crosscut lengths.

Standard Equipment

• Zinc plated 1 ¾” steel guide tubes.
• Milwaukee Tool motor
• 4 Nylatron roller bearing systems.
• Adjustable vertical and horizontal rulers.
• Quick change from vertical to horizontal cutting.
• Thin material pressure guard.
• Injection-molded plastic material rollers.
• Spring loaded counter balance system.
• Integrated dust collection bonnet.
• Extended warranty.
• TUV certified to UL/CSA standards

Specifications:

• Weight 219 lbs
• Dimensions 60 x 11 x 83in
• Max. Crosscut 64″/1625mm
• Max. Rip Cut 96″/2450mm
• Cut Depth 1 ¾”/45mm
• Cut Accuracy 1/32″/.8mm
• Frame Length 60″/ 525mm
• Daily Usage 1-3 Hours
• Rollers 8
• Saw Blade Diameter 8″/210mm
• Saw Blade Bore 5/8″
• Motor Horsepower, Amperage and Volts 3.25 HP, 15 amp, 120 Volt / 3.25 HP, 7.5 amp, 220 Volt
• Motor Manufacturer Milwaukee Tool
• Country of Origin USA

This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4’X8′ sheets of material. The only difference between this machine and the C5 Panel saw are the maximum crosscuts.

Available in the following configurations:

• 3.25 HP, 15 amp, 120 Volt
• 3.25 HP, 7.5 amp, 220 Volt

Standard Equipment:

• 3 ¼ Hp, 15 amp industrial, Milwaukee Tool motor.
• Zinc plated 1 ¾” steel guide tubes.
• 4 Nylatron roller bearing systems.
• Adjustable vertical and horizontal rulers.
• Quick change from vertical to horizontal cutting.
• Thin material pressure guard.
• Injection-molded plastic material rollers.
• Spring loaded counter balance system.
• Integrated dust collection bonnet.
• Extended warranty.
• TUV certified to UL/CSA standards

Specifications:

• Weight 189 lbs
• Dimensions 60 x 11 x 70in
• Max. Crosscut 50″/1270mm
• Max. Rip Cut 96″/2450mm
• Cut Depth 1 ¾”/45mm
• Cut Accuracy 1/32″/.8mm
• Frame Length 60″/ 525mm
• Saw Blade Diameter 8″/210mm
• Saw Blade Bore 5/8″
• Daily Usage 1-3 Hours
• Rollers 8
• Motor Horsepower, Amperage and Volts 3.25 HP, 15 amp, 120 Volt / 3.25 HP, 7.5 amp, 220 Volt
• Motor Manufacturer Milwaukee Tool
• Country of Origin USA