The F1 features an Overhead SMART Digital Controller, which electronically sets the blade height, blade angle, and rip fence position for fast, repeatable setup and minimal operator effort. With a push of a button the operator can start/stop both saw blades independently, raise/lower the saw blade, tilt the saw blades and move the fence system to precision settings and measurements.

Saw blade tilting from 0° to 45° is controlled by a 750W Delta servo motor with a heavy-duty ballscrew system, while the massive cast iron trunnion system delivers outstanding rigidity and vibration-free performance. Main saw blade elevation is driven by a 400W Delta servo motor, while the rip fence positioning is powered by an additional 400W Delta servo motor and ballscrew system, providing smooth, extremely accurate and repeatable accurate adjustments every time.

At the heart of the machine is a powerful 7.5 HP, 220 Volt, Three Phase main motor paired with a 1 HP scoring motor, providing clean, chip-free cuts in melamine, plywood, MDF, hardwoods, and composite materials. The saw accepts 12″ to 16″ diameter main blades with a 30mm bore and dual 10mm pin holes, along with a 120mm x 20mm scoring blade. Three selectable main blade speeds of 3000, 4000, and 5000 RPM allow the saw to be optimized for different blade sizes and materials, while the 8000 RPM scoring blade ensures flawless finishes on laminated panels with a 16” blade the saw is capable of cutting material up to 4-15/16″ thick.

The heavy-duty 3200mm x 430mm aluminum sliding table offers a generous 126″ cutting stroke, allowing effortless handling of full-size sheet goods with exceptional accuracy. A robust outrigger support stabilizes large panels during cutting, while the crosscut fence features three flip stops with ELGO digital readouts for fast, repeatable dimensioning. Additional conveniences include an eccentric hold-down clamp for securing workpieces and a push bar for smooth operation of the sliding table.

The Euro-style swing-away transparent blade guard provides excellent visibility while incorporating an 80mm dust port for effective dust extraction. There are two detachable sides of the guard, one for 90 degree cutting and a second for angled cutting to allow the blade tilt.

A 4″ main dust inlet leads to an enclosed cavity around the sawblades to further enhance dust collection to help maintain a cleaner work environment.

The Stallion F1 includes large side and rear metal extension tables for improved workpiece support during oversized cuts. Premium CSA-certified Siemens and Schneider electrical components ensure dependable performance and long-term reliability. Completing the machine is integrated LED under glow lighting, which automatically illuminates when the saw is operating, adding both safety and a distinctive modern appearance.

Built for shops that demand uncompromising accuracy, intelligent automation, and industrial-grade durability, the Stallion F1 Deluxe 10′ Sliding Panel Saw is a high-performance solution designed to maximize productivity while delivering exceptional cutting precision on every project.

Specifications:

• Overhead SMART Digital Controller (Sets blade height, angle and rip fence position)
• 5 HP 220 Volt Three Phase Main Motor
• 1 HP Scoring Motor
• 12”-16” Dia. Main Saw Blade Capacity w/ 30mm Bore and Two 10mm Pin Holes
• 120mmx 20mm Scoring blade (not included)
• 3000/4000/5000 RPM Main Blade (3 Speeds Depending on Blade Size)
• 8000 RPM Scoring Blade
• Blade Tilt Degree: 0-45
• Massive Cast Iron Trunnion System
• Main Blade Rise/Fall Mechanism Powered by a 400w Delta Servo Motor
• Blade Angle Positioning Powered by a 750w Delta Servo Motor & Heavy Duty Ballscrew
• Rip Fence Positioning Powered by a 400w Delta Servo Motor and Ballscrew assembly for extreme accuracy
• Heavy Duty 3200mm x 430mm Aluminum Sliding Table
• Heavy Duty Outrigger for Large Panel Support
• Crosscut Fence with 3 Flip Stops with ELGO Digital Readouts
• ”Euro” Swing Away See Through Blade Guard w/80mm Dust Port
• Sliding Table Cutting Stroke: 126″
• Max Cutting Thickness with 16” main blade: 4-15/16″
• Large Side and Rear Metal Extension Tables
• CSA Certified Electrics from Siemens & Schneider
• Eccentric Hold Down Clamp
• Push Bar for Sliding table
• 4” Dust Inlet Diameter
• LED Under Glow Lighting (Activates when the saw is in operation)

Stallion table saws are designed with attributes like strength, grace, power and beauty. CWI Woodworking Technologies has developed Stallion Sawing Equipment to be among the elite of woodworking machinery sold in North America.

The CWI-T1204-S5B is one of a series of Stallion 12” sliding/scoring panel saws built with abilities for the small wood shop which just can’t be matched with a standard table saw. A true workhorse machine designed for accuracy and ability to accomplish any demanding task asked of it. The quality of the build, the cast iron trunnions, the anodized aluminum sliding table and the included sawing accessories make this machine stand out against any competitive sized machine on the market today.

The T1204-S5B is a true industrial quality saw with a 48” stroke of the sliding table and an additional ¾ HP scoring motor. Many competitive machines in this class of saw use belt drive scoring and very small scoring saw blades in either 80mm or 100 mm diameter. The CWI-T1204-S5B uses an industrial sized 120mm x 20mm bore scoring saw blade set (not included) and because it operates with its own motor it can be left in the off position and lowered into the body of the saw when being used for solid wood applications. With belt drive designs in competitive machines the trunnion works of the saw are built much lighter in quality and the blade is always spinning whether in use or not.

Using the T1204-S5B saw for cutting man made laminates, melamine’s or veneered plywood’s is a dream. Always getting perfect cuts top and bottom with no chipping. Equally as impressive for cutting solid woods the T1204-S5B is amazing for thick ripping/crosscutting, glue line cutting and dado cuts because the sliding table runs right up against the saw blades and the table rides so smoothly the quality of the cut is vastly superior to that of a standard cabinet saw. Working with live or rough edge solid woods, angle cutting, taper cuts, miter cuts on the T1204-S5B are amazingly simple and accurate.

Safety is another huge advantage of the T1204-S5B slider. The operator of the T1204-S5B saw stands on the left side of the sliding table, not in front of the saw blade, as the sliding table now does all the work, not the operator’s hands pushing the work piece past the blade. So not only does the user get smoother cuts, the clamping accessories allow the work piece to pass the saw blades in a solid locked position.

Included with the T1204-S5B is a very strong 4 HP motor to drive the 12” main blade with 30mm bore (not included), ¾ HP scoring motor, miter fence with flip stop, sliding table for a 48” crosscutting/ripping capacity (unlimited rip capacity without use of the sliding table), ¾” dado capacity, eccentric hold down clamp for miter work or small piece cutting, panel clamp for narrow ripping, push bar for the sliding table and 36” rip capacity to the right of the blade with a cast iron/aluminum fence running on a solid steel 2” diameter fence bar.

The Stallion T1204-S5B sliding/scoring table saws are a true step up in capabilities and safety over standard design cabinet saws allowing users to have more creativity and ability in their wood shops. The ease of adjustments, the quality of the build, the performance features and the sawing accessories included as standard equipment make these saws stand out over any other brand of table saw.

Specifications:

• 18 AMP 4 HP 220 Volt Main Motor
• 3/4 HP 220 Volt Scoring Motor
• 12” Main Blade Capacity ( 30mm Arbor w/2 x10mm pin holes) (Blade Not Included)
• 120mm x 20mm Scoring Blade (Not Included)
• Depth of Cut 102mm (12” Blade 90 Degree)
• Depth of Cut 72mm (12” Blade 45 Degree)
• Maximum Crosscut 48”
• Maximum Rip 48” w/Slider (Unlimited without slider)
• Max Rip Width Right of Saw Blade 36”
• Dado Capacity of 3/4” (30mm Bore)
• Magnetic Safety Switch w/overload and under voltage protection
• Sliding Table Size 1200mm x 360mm
• ”Banana” Style Blade Guard
• Table Height 34.5”
• Robust Cast Iron Trunnion System
• Heavy Cast Fence body with adjustable Aluminum Fence Plate
• Miter Fence w/Flip Stop
• Eccentric Hold Down Clamp
• Push Bar for Sliding table
• Panel Clamp for Long Narrow Workpieces
• Panel Support Table extension on Sliding table
• 4” Dust Inlet
• CSA Certification
• Floor Space 72” wide x 67” long x 34.5” table height
• Shipping Size 51.5” x 39” x 43”
• 1012 Pounds Shipping Weight

CWI Woodworking Technologies has developed Stallion Sawing Equipment to be among the elite of woodworking machinery sold in North America. An industrial Stallion table saw like the S5 which features a sliding table and scoring capability is loaded with industry leading features, performance and safety built into its frame.

The S5 is one of a series of Stallion 12” sliding/scoring panel saws built with abilities for the small wood shop which just can’t be matched with a standard table saw. A true workhorse machine designed for accuracy and ability to accomplish any demanding task asked of it. The quality of the build, the cast iron trunnions, the anodized aluminum sliding table and the included sawing accessories make this machine stand out against any competitive sized machine on the market today.

The S5, like the Stallion S4 and S8, is a true industrial quality saw with a 60” stroke of the sliding table and an additional ¾ HP scoring motor. Many competitive machines in this class of saw use belt drive scoring and very small scoring saw blades in either 80mm or 100 mm diameter. The S5 uses an industrial sized 120mm x 20mm bore scoring saw blade set (not included) and because it operates with its own motor it can be left in the off position and lowered into the body of the saw when being used for solid wood applications. With belt drive designs in competitive machines the trunnion works of the saw are built much lighter in quality and the blade is always spinning whether in use or not.

Using the S5 saw for cutting man made laminates, melamine’s or veneered plywood’s is a dream. Always getting perfect cuts top and bottom with no chipping. Equally as impressive for cutting solid woods the S5 is amazing for thick ripping/crosscutting, glue line cutting and dado cuts because the sliding table runs right up against the saw blades and the table rides so smoothly the quality of the cut is vastly superior to that of a standard cabinet saw. Working with live or rough edge solid woods, angle cutting, taper cuts, miter cuts on the S5 are amazingly simple and accurate.

Safety is another huge advantage of the S5 slider. The operator of the S5 saw stands on the left side of the sliding table, not in front of the saw blade, as the sliding table now does all the work, not the operator’s hands pushing the workpiece past the blade. So not only does the user get smoother cuts, the clamping accessories allow the work piece to pass the saw blades in a solid locked position. The “swing away” Euro blade guard is a very nice feature allowing full vision of the saw blade while providing extra safety and dust collection over top of the blade.

Included with the S5 is a very strong 4 HP motor to drive the 12” main blade with 30mm bore (not included), ¾ HP scoring motor, miter fence with flip stop, sliding table for a 60” crosscutting/ripping capacity (unlimited rip capacity without use of the sliding table), outrigger table assembly for better workpiece panel support, full crosscut fence with two flip stops, ¾” dado capacity, eccentric hold down clamp for miter work or small piece cutting, panel clamp for narrow ripping, push bar for the sliding table and 36” rip capacity to the right of the blade with a cast iron/aluminum fence running on a solid steel 2” diameter fence bar.

The Stallion S5 sliding/scoring table saws are a true step up in capabilities and safety over standard design cabinet saws allowing users to have more creativity and ability in their wood shops. The ease of adjustments, the quality of the build, the performance features and the sawing accessories included as standard equipment make these saws stand out over any other brand of table saw.

Specifications:

• 18 AMP 4 HP 220 Volt Main Motor
• 3/4 HP 220 Volt Scoring Motor
• 12” Main Blade Capacity ( 30mm Arbor w/2 x10mm pin holes) (Not Included)
• 120mm x 20mm Scoring Blade (Not Included)
• Depth of Cut 102mm (12” Blade 90 Degree)
• Depth of Cut 72mm (12” Blade 45 Degree)
• 4000 RPM Main Blade
• 8000 RPM Scoring Blade
• Maximum Crosscut 60” w/Slider
• Maximum Rip 60” w/Slider (Unlimited without slider)
• Max Rip Width Right of Saw Blade 36”
• Dado Capacity of 3/4” (30mm Bore)
• Magnetic Safety Switch w/overload and under voltage protection
• Sliding Table Size 1600mm x 360mm
• Crosscut fence w/2 Flip Stops
• Miter fence w/Flip Stop
• Moveable Outrigger Table for Panel Support
• ”Euro” Swing Away See Through Blade Guard w/80mm Dust Port
• Table Height 34.5”
• Robust Cast Iron Trunnion System
• Heavy Cast Fence body with adjustable Aluminum Fence Plate
• Miter Fence w/Flip Stop
• Eccentric Hold Down Clamp
• Push Bar for Sliding table
• Panel Clamp for Long Narrow Workpieces
• 4” Dust Inlet
• CSA Certification
• Floor Space 94” wide x 73” long x 34.5” table height
• Shipping Size 51.5” x 39” x 43”
• 1125 Pounds Shipping Weight

CWI Woodworking Technologies has developed Stallion Sawing Equipment to be among the elite of woodworking machinery sold in North America. An industrial Stallion table saw like the S8 which features a sliding table and scoring capability is loaded with industry leading features, performance and safety built into its frame.

The S8 is one of a series of Stallion 12” sliding/scoring panel saws built with abilities for the small wood shop which just can’t be matched with a standard table saw. A true workhorse machine designed for accuracy and ability to accomplish any demanding task asked of it. The quality of the build, the cast iron trunnions, the anodized aluminum sliding table and the included sawing accessories make this machine stand out against any competitive sized machine on the market today.

The S8, like the Stallion S4 and S5, is a true industrial quality saw with a ¾ HP scoring motor and a 102” stroke of the sliding table to allow full ripping and crosscutting of 4’ x 8’ sheet goods,. Many competitive machines in this class of saw use belt drive scoring and very small scoring saw blades in either 80mm or 100 mm diameter. The S8 uses an industrial sized 120mm x 20mm bore scoring saw blade set (not included) and because it operates with its own motor it can be left in the off position and lowered into the body of the saw when being used for solid wood applications. With belt drive designs in competitive machines the trunnion works of the saw are built much lighter in quality and the blade is always spinning whether in use or not.

The Stallion S8 is a very heavily built saw with a large precision sliding table and a much more robust trunnion system than most competitors. Maintenance and adjustments of the accuracy in the sliding table and fences are easily accessed and a simple task. Once set, the robustness of the saw holds everything tight and true for a truly industrial capable saw. Using the S8 saw for cutting man made laminates, melamine’s or veneered plywood’s is a dream. Always getting perfect cuts top and bottom with no chipping. Equally as impressive for cutting solid woods the S8 is amazing for thick ripping/crosscutting, glue line cutting and dado cuts because the sliding table runs right up against the saw blades and the table rides so smoothly the quality of the cut is vastly superior to that of a standard cabinet saw. Working with live or rough edge solid woods, angle cutting, taper cuts, miter cuts on the S8 are amazingly simple and accurate.

Safety is another huge advantage of the S8 slider. The operator of the S8 saw stands on the left side of the sliding table, not in front of the saw blade, as the sliding table now does all the work, not the operator’s hands pushing the workpiece past the blade. So not only does the user get smoother cuts, the clamping accessories allow the work piece to pass the saw blades in a solid locked position. The “swing away” Euro blade guard is a very nice feature allowing full vision of the saw blade while providing extra safety and dust collection over top of the blade.

Included with the S8 is a very strong 4 HP 220 volt single phase motor to drive the 12” main blade with 30mm bore (not included), ¾ HP scoring motor, miter fence with flip stop, sliding table for a 102” crosscutting/ripping capacity (unlimited rip capacity without use of the sliding table), full size outrigger table assembly for large workpiece panel support, full crosscut fence with two flip stops, ¾” dado capacity, eccentric hold down clamp for miter work or small piece cutting, panel clamp for narrow ripping, push bar for the sliding table and 48” rip capacity to the right of the blade with a cast iron/aluminum fence running on a solid steel 2” diameter fence bar.

The Stallion S8 sliding/scoring table saw is an industrial workhorse and a true step up in capabilities and safety over standard design cabinet saws allowing users to have more creativity and ability in their wood shops. The ease of adjustments, the quality of the build, the performance features and the sawing accessories included as standard equipment make these saws stand out over any other brand of table saw.

Specifications:

• 18 AMP 4 HP 220 Volt Main Motor (Single Phase)
• 3/4 HP 220 Volt Scoring Motor
• 12” Main Blade Capacity ( 30mm Arbor w/2 x10mm/60mm BC pin holes) (Not Included)
• 120mm x 20mm Scoring Blade (Not Included)
• Depth of Cut 102mm (12” Blade 90 Degree)
• Depth of Cut 72mm (12” Blade 45 Degree)
• 4000 RPM Main Blade
• 8000 RPM Scoring Blade
• Maximum Crosscut 102” w/Slider
• Maximum Rip 102” w/Slider (Unlimited without slider)
• Max Rip Width Right of Saw Blade 48”
• Dado Capacity of 3/4” (30mm Bore)
• Magnetic Safety Switch w/overload and under voltage protection
• Sliding Table Size 2600mm x 360mm
• Crosscut fence w/2 Flip Stops
• Miter fence w/Flip Stop
• Full Size Outrigger Table for Large Panel Support
• ”Euro” Swing Away See Through Blade Guard w/80mm Dust Port
• Table Height 34.5”
• Robust Cast Iron Trunnion System
• Heavy Cast Fence body with adjustable Aluminum Fence Plate
• Miter Fence w/Flip Stop
• Eccentric Hold Down Clamp
• Push Bar for Sliding table
• Panel Clamp for Long Narrow Workpieces
• 4” Dust Inlet
• CSA Certification
• Floor Space 135” wide x 114” long x 34.5” table height
• Shipping Size 106.5” x 42.5” x 45.5”
• 1496 Pounds Shipping Weight

Stallion table saws are designed with attributes like strength, grace, power and beauty. CWI Woodworking Technologies has developed Stallion Sawing Equipment to be among the elite of woodworking machinery sold in North America. An industrial Stallion table saw like the S10 which features a sliding table and scoring capability is loaded with industry leading features, performance and safety built into its frame.

The S10 is the large industrial brother to the S5B, S5S and S8 Stallion sliding/scoring panel saws. It is a much heavier stronger build with abilities for the small to mid-size commercial wood shop to be the go to saw for production work. A true workhorse machine designed for accuracy and ability to accomplish any demanding task asked of it. The quality of the build, the cast iron trunnions, the anodized aluminum sliding table and the included sawing accessories make this machine stand out against any competitive sized machine on the market today.

The S10 is a true industrial quality saw operating on Three Phase electrical power with a ¾ HP scoring motor and a 126” stroke of the sliding table to allow full ripping and crosscutting of 10’ sheet goods,. The S10 uses an industrial sized 120mm x 20mm bore scoring saw blade set (not included) and because it operates with its own motor it can be left in the off position and lowered into the body of the saw when being used for solid wood applications. Maintenance and adjustments of the accuracy in the sliding table and fences are easily accessed and a simple task. Once set, the robustness of the saw holds everything tight and true for a truly industrial capable saw.

Using the S10 saw for cutting man made laminates, melamine’s or veneered plywood’s is a dream. Always getting perfect cuts top and bottom with no chipping. Equally as impressive the S10 is amazing for cutting solid woods, dado cutting, taper cuts, miter cuts and more. The large crosscut fence on the outrigger support comes with two flip stops and is also able to easily adjust for miter work on larger panels. Also included is a miter fence with its own flip stop for small miter work and solid wood cutting.

Safety is another huge advantage of the S10 slider. The operator stands on the left side of the sliding table, not in front of the saw blade, as the sliding table now does all the work instead of the operator’s hands pushing the workpiece past the blade. So not only does the user get smoother cuts, the clamping accessories allow the work piece to pass the saw blades in a solid locked position. The “swing away” Euro blade guard is a very nice feature allowing full vision of the saw blade while providing extra safety and dust collection over top of the blade.

Included with the S10 is a very strong 7.5 HP 220 volt three phase motor to power the main saw blade. Users can choose from three different blade speeds depending on whether using 12”, 14” or 16” main saw blade (not included).The main blade arbor is a 30mm diameter and a large blade flange with two 10mm pins at 60mm between centers. Also standard equipment are a ¾ HP scoring motor, miter fence with flip stop, sliding table for a 126” crosscutting/ripping capacity , full size outrigger table assembly for large workpiece panel support, full crosscut fence with two flip stops, ¾” dado capacity (30mm bore), eccentric hold down clamp for miter work or small piece cutting, panel clamp for narrow ripping, push bar for the sliding table and 48” rip capacity to the right of the blade with a cast iron/aluminum fence running on a solid steel 2” diameter fence bar. There are two large steel extensions on the saw, one right of the main cast table and one beyond the cast table for extra work piece support in the cut.

Specifications:

• 7.5 HP 220 Volt Three Phase Main Motor
• 3/4 HP Scoring Motor
• 12”-16” Dia. Main Saw Blade Capacity w/ 30mm Bore and Two 10mm Pin Holes (Blade Not Included)
• 120mmx 20mm Scoring blade (Not Included)
• 3000/4000/5000 RPM Main Blade (3 Speeds Depending on Blade Size)
• 8000 RPM Scoring Blade
• 130mm Cut (90) 90mm Cut (45)
• 1250mm Max Rip Capacity
• Heavy Duty 3200mm x 418mm Aluminum Sliding Table
• Heavy Duty Outrigger for Large panel Support
• Crosscut Fence w/2 Flip Stops (Can Also Angle Cut)
• ”Euro” Swing Away See Through Blade Guard w/80mm Dust Port
• Heavy Cast Fence body with adjustable Aluminum Fence Plate
• Miter Fence w/Flip Stop
• Eccentric Hold Down Clamp
• Push Bar for Sliding table
• Panel Clamp for Long Narrow Workpieces
• Multi Ribbed Flat Drive Belt
• Large Side and Rear Metal Extension Tables
• 4” Dust Inlet Diameter
• CSA Certification
• Floor Space 145” wide x 140” long x 34.5” table height
• Shop Space required to Operate saw 264” x 228” x 58”
• Shipping Dimensions (Saw 90.5” x 47” x 36”) (Table 142” x 20” x 11”)
• 1914 Pounds Shipping Weight (1672 Pounds Net Weight)