SawStop along with Canadian Woodworker is proud to support The Skills Competition Groups across Canada. These demo units have been used at these events and are now available at a special educational sale price. Limited stock available at this sale price. Contact us for a shipping quote. 

The Professional Cabinet Saw (PCS) is an extremely well built table saw for use in education or home shops for customers looking for unparalleled safety and quality of saw. The PCS saws have three different fence options and two motor options. When ordering your saw first choose the motor size you wish to purchase and then the fence cutting capacity which will work best in your shop.

A fast-acting brake stops the blade when contact is detected. The brake includes a heavy-duty spring to push a block of aluminum, called a brake pawl, into the teeth of the blade to stop the blade from spinning. The spring is held in compression by a fuse wire until contact is detected. When contact is detected, the system sends a surge of electricity through the fuse wire to burn the wire and release the spring. The spring pushes the brake pawl into the teeth of the spinning blade, and the teeth cut into the aluminum and bind, thereby stopping the blade. All this happens in about 5 milliseconds, or 1/200th of a second. At the same time, the angular momentum of the blade causes the blade to retract below the table and the power to the motor is shut off. The optional brake cartridges are single-use components that must be changed if the brake is ever activated. Changing a brake cartridge is fast and easy, no more complicated than changing the blade.

A very nice blade guard designed specifically for the Professional Cabinet Saw features independent lateral sides to minimize exposure to the blade. It retains a low profile to allow for cuts as narrow as 3/4 of an inch. Riving knife minimizes kickback and provides protection during non-through cuts. We double-check the saw every time you turn it on with a diagnostic self-check which runs when you start the saw to ensure all systems are ready to detect an accident. If any problem is detected, the system will not allow the saw to start. Sometimes you have your hands full and really need to stop the blade. Our large start/stop paddle with hands-free shutoff can be pushed with your knee allowing you to safely stop the blade.

Never worry again about someone using your saw when you’re not around. The main power switch with lockout key prevents unauthorized users from operating the saw. When the power goes out, the saw stays off. The safety system won’t allow the motor to restart automatically when the power comes back on.

Left-tilting blade prevents wood from binding against the fence. A sophisticated dust shroud draws sawdust away from the blade and funnels it through a 4″ tube to a port at the rear of the cabinet. Effectively redirects dust away from the saw even when not attached to a dust collection system. Quick-release, zero-clearance insert provides support throughout the cut reducing tear out and chip out. The tool-free quick release makes removing the insert for blade or guard changes a breeze. A positive latching mechanism lets you know the insert is securely in place.

The 27″ deep extension table is compatible with popular after-market accessories including a router table extension.

Ample and easy access inside the cabinet. Three doors in the cabinet make it easy to get to all adjustment points on both sides of the trunnion.

Inconvenience is the enemy of safety. We made it easy to change between blade guard and riving knife with our tool-free blade guard quick change mechanism. Operators can remove the insert and make blade changes quickly with no tools required, minimizing disruptions to workflow. The safety bypass switch allows users to cut conductive material without activating the brake. Since the bypass has to be turned on every time the blade is started, you don’t have to remember to turn off the bypass system when you’re done.

Precise elevation changes made easy. The gas-assisted vertical elevation system is located close to the internal structure’s center of gravity, making fine-tuning smooth and easy. The elevation system operates on a vertical slide rather than on an arc providing you with repeatability and consistent alignment. Blade height is proportional to handle turns at all elevations. Mechanical adjustment points on the trunnion enable the operator to make micro adjustments, ensuring exact blade alignment at all bevel angles.

Models Available are:

• PCS31230-TGP236 – SAWSTOP 3HP 220V 10″PROFESSIONAL CABINET SAW 36″ RAIL, FENCE AND TABLE BOARD ASSEMBLY

Specifications:

• Footprint: 85 1/4″ w x 33″ d x 34″ h (w/ Pro-Glide Fence System & 52″ rails)
• Cabinet footprint: 19 3/8″ w x 19 3/8″ d
• Cast iron table: 20″ w x 27″ d, 44″ w x 27″ d (w/ extension wings)
• Extension table 40 1/8″ w x 27″ d (52″ rails)
• Weights: 265 lbs (table saw only) 449 lbs (with T-Glide Fence System & 52″ rails)
• Blade: 40-tooth, professional grade, 5/8″ arbor
• Blade diameter: 10″
• Blade tilt: Left
• Max. depth of cut, blade at 0° 3 1/8″
• Max. depth of cut, blade at 45° 2 1/4″
• Max. rip, right of blade: 52″ (with optional 52″ rails)
• Max. rip, left of blade:12″
• Dado diameter: 8″ (requires a separate brake cartridge and table insert)
• Dado max. width: 13/16″
• Arbor diameter at blade: 5/8″
• Table in front of blade (max. elevation): 10 1/4″
• Dust collection port diameter: 4″
• Riving knife / splitter thickness: 0.078″ (2mm)
• Blade guard: polycarbonate, extends only 5/8″ to right of blade
• Insert: zero clearance, steel core, ABS surfaces
• Hand wheels: 7″ diameter, cast iron with chrome handle
• Belts: 2 V-ribbed belts – arbor belt is static dissipative

The F1 features an Overhead SMART Digital Controller, which electronically sets the blade height, blade angle, and rip fence position for fast, repeatable setup and minimal operator effort. With a push of a button the operator can start/stop both saw blades independently, raise/lower the saw blade, tilt the saw blades and move the fence system to precision settings and measurements.

Saw blade tilting from 0° to 45° is controlled by a 750W Delta servo motor with a heavy-duty ballscrew system, while the massive cast iron trunnion system delivers outstanding rigidity and vibration-free performance. Main saw blade elevation is driven by a 400W Delta servo motor, while the rip fence positioning is powered by an additional 400W Delta servo motor and ballscrew system, providing smooth, extremely accurate and repeatable accurate adjustments every time.

At the heart of the machine is a powerful 7.5 HP, 220 Volt, Three Phase main motor paired with a 1 HP scoring motor, providing clean, chip-free cuts in melamine, plywood, MDF, hardwoods, and composite materials. The saw accepts 12″ to 16″ diameter main blades with a 30mm bore and dual 10mm pin holes, along with a 120mm x 20mm scoring blade. Three selectable main blade speeds of 3000, 4000, and 5000 RPM allow the saw to be optimized for different blade sizes and materials, while the 8000 RPM scoring blade ensures flawless finishes on laminated panels with a 16” blade the saw is capable of cutting material up to 4-15/16″ thick.

The heavy-duty 3200mm x 430mm aluminum sliding table offers a generous 126″ cutting stroke, allowing effortless handling of full-size sheet goods with exceptional accuracy. A robust outrigger support stabilizes large panels during cutting, while the crosscut fence features three flip stops with ELGO digital readouts for fast, repeatable dimensioning. Additional conveniences include an eccentric hold-down clamp for securing workpieces and a push bar for smooth operation of the sliding table.

The Euro-style swing-away transparent blade guard provides excellent visibility while incorporating an 80mm dust port for effective dust extraction. There are two detachable sides of the guard, one for 90 degree cutting and a second for angled cutting to allow the blade tilt.

A 4″ main dust inlet leads to an enclosed cavity around the sawblades to further enhance dust collection to help maintain a cleaner work environment.

The Stallion F1 includes large side and rear metal extension tables for improved workpiece support during oversized cuts. Premium CSA-certified Siemens and Schneider electrical components ensure dependable performance and long-term reliability. Completing the machine is integrated LED under glow lighting, which automatically illuminates when the saw is operating, adding both safety and a distinctive modern appearance.

Built for shops that demand uncompromising accuracy, intelligent automation, and industrial-grade durability, the Stallion F1 Deluxe 10′ Sliding Panel Saw is a high-performance solution designed to maximize productivity while delivering exceptional cutting precision on every project.

Specifications:

• Overhead SMART Digital Controller (Sets blade height, angle and rip fence position)
• 5 HP 220 Volt Three Phase Main Motor
• 1 HP Scoring Motor
• 12”-16” Dia. Main Saw Blade Capacity w/ 30mm Bore and Two 10mm Pin Holes
• 120mmx 20mm Scoring blade (not included)
• 3000/4000/5000 RPM Main Blade (3 Speeds Depending on Blade Size)
• 8000 RPM Scoring Blade
• Blade Tilt Degree: 0-45
• Massive Cast Iron Trunnion System
• Main Blade Rise/Fall Mechanism Powered by a 400w Delta Servo Motor
• Blade Angle Positioning Powered by a 750w Delta Servo Motor & Heavy Duty Ballscrew
• Rip Fence Positioning Powered by a 400w Delta Servo Motor and Ballscrew assembly for extreme accuracy
• Heavy Duty 3200mm x 430mm Aluminum Sliding Table
• Heavy Duty Outrigger for Large Panel Support
• Crosscut Fence with 3 Flip Stops with ELGO Digital Readouts
• ”Euro” Swing Away See Through Blade Guard w/80mm Dust Port
• Sliding Table Cutting Stroke: 126″
• Max Cutting Thickness with 16” main blade: 4-15/16″
• Large Side and Rear Metal Extension Tables
• CSA Certified Electrics from Siemens & Schneider
• Eccentric Hold Down Clamp
• Push Bar for Sliding table
• 4” Dust Inlet Diameter
• LED Under Glow Lighting (Activates when the saw is in operation)

Features:

• 15-Amp saw with 3,800 rpm for rip-cutting and cross-cutting of fine and hard wood materials
• Convenience brake – helps blade stop in approximately three seconds, increasing productivity
• Clampzone areas – allow tabletop to be used as a light-duty, secondary work surface
• Open frame design – equipped with open frame roll bar and lightweight construction for durability
• Soft-start circuitry – manages intensity of motor start-up and minimizes the possibility of tripping a circuit breaker
• Electronically regulated speed – helps maintain speed under load
• Portability – works seamlessly with the included lighter GTA50W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• Rack and pinion rip fence – features color-coded index pins that correlate with matching color-coded scale for easy adjustments by hand dial
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• On-tool storage – stores the rip fence, miter gauge, Smart Guard System, hex wrench, blade wrench and push stick on the tool

10″ BLADE:

For maximum cut capacity

RACK & PINION FENCE:

The Rack & Pinion fence is easy to adjust and reliably square, with a built-in high and low face that supports all kinds of cuts.

QUICK-TILT BEVEL WITH MICRO ADJUSTMENTS:

Quickly and easily tilt the blade to your ideal angle with just one hand. The micro-adjust feature provides the ability to dial in a precise cutting angle.

SAWSTOP’S PATENTED SAFETY SYSTEM:

Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

ON-SAW STORAGE COMPARTMENT:

Everything has its place: Stow away tools and accessories in one location for easy access and quick retrieval.

Features:

• Exclusive-to-SawStop micro-adjust feature allows you to get the most precise cutting angles possible on a job site
• Solid Hi-Low Rack & Pinion Fence: Ensures reliably accurate cuts while supporting wide rips up to 24 1/2”.
• Rigid tube structure and rubber feet provide a durable, stable cutting experience
• 10″ blade for greater depth of cut
• On-saw storage compartment so you have all the tools you need close at hand
• Compact and portable for easy travel to any job site
• SawStop Safety System stops on contact with skin
• Optional folding stand available

Specifications:

• Motor Configuration 120 VAC 60 Hz, Universal
• Amperage (A) 15A
• No-Load RPM 4,000
• Blade 10″ (not compatible with Dado blades)
• Max. Depth of Cut at 0° 3 1/8″ (79.5 mm)
• Max. Depth of Cut at 45° 2 1/8″ (54 mm)
• Max. Rip, Right of Blade 24 1/2″ (648 mm)
• Max. Rip, Left of Blade 9 1/2″ (241 mm)
• Weight 68 lbs
• Overall Footprint 14 ¼” H x 23 ½” W x 27” D
• Table Surface 23” W X 22 5/8” D
• Shipping Dimensions 27 W x 31 D x 18 H
• Shipping Weight 79 lbs
• Dust Port 2 1/2″

Features:

• Gravity-Rise Stand Patented for easy set-up and take down of your table saw.
• Exceptional Portability – quick and easy transport between jobsites
• Heavy Duty Construction – Built to last with powder coat paint finish for longevity
• 8″” Treaded Pneumatic Wheels – Handles the toughest and unexpected jobsite terrains
• Collapsible Design – Minimizes storage space requirements

Includes:

• Gravity-Rise Table Saw Stand With Pneumatic Wheels

Specifications:

• Amperage: 15
• Arbor Size: 5/8″”
• Bevel Angle Range: -2° to 47°
• Blade Diameter: 10″”
• Country of Origin: Taiwan
• Description: 10″” Worksite Table Saw with Gravity-Rise Wheeled Stand
• Dimensions: 39.13 x 30 x 20.9
• Max. Motor HP: 4.0
• No Load RPM: 3,650
• Weight (lbs.): Saw – 60 lbs. (with Stand 99 lbs.)
• Working Length: Table Top dimensions 29″

The Professional Cabinet Saw (PCS) is an extremely well built table saw for use in education or home shops for customers looking for unparalleled safety and quality of saw. The PCS saws have three different fence options and two motor options. When ordering your saw first choose the motor size you wish to purchase and then the fence cutting capacity which will work best in your shop.

A fast-acting brake stops the blade when contact is detected. The brake includes a heavy-duty spring to push a block of aluminum, called a brake pawl, into the teeth of the blade to stop the blade from spinning. The spring is held in compression by a fuse wire until contact is detected. When contact is detected, the system sends a surge of electricity through the fuse wire to burn the wire and release the spring. The spring pushes the brake pawl into the teeth of the spinning blade, and the teeth cut into the aluminum and bind, thereby stopping the blade. All this happens in about 5 milliseconds, or 1/200th of a second. At the same time, the angular momentum of the blade causes the blade to retract below the table and the power to the motor is shut off. The optional brake cartridges are single-use components that must be changed if the brake is ever activated. Changing a brake cartridge is fast and easy, no more complicated than changing the blade.

A very nice blade guard designed specifically for the Professional Cabinet Saw features independent lateral sides to minimize exposure to the blade. It retains a low profile to allow for cuts as narrow as 3/4 of an inch. Riving knife minimizes kickback and provides protection during non-through cuts. We double-check the saw every time you turn it on with a diagnostic self-check which runs when you start the saw to ensure all systems are ready to detect an accident. If any problem is detected, the system will not allow the saw to start. Sometimes you have your hands full and really need to stop the blade. Our large start/stop paddle with hands-free shutoff can be pushed with your knee allowing you to safely stop the blade.

Never worry again about someone using your saw when you’re not around. The main power switch with lockout key prevents unauthorized users from operating the saw. When the power goes out, the saw stays off. The safety system won’t allow the motor to restart automatically when the power comes back on.

Left-tilting blade prevents wood from binding against the fence. A sophisticated dust shroud draws sawdust away from the blade and funnels it through a 4″ tube to a port at the rear of the cabinet. Effectively redirects dust away from the saw even when not attached to a dust collection system. Quick-release, zero-clearance insert provides support throughout the cut reducing tear out and chip out. The tool-free quick release makes removing the insert for blade or guard changes a breeze. A positive latching mechanism lets you know the insert is securely in place.

The 27″ deep extension table is compatible with popular after-market accessories including a router table extension.

Ample and easy access inside the cabinet. Three doors in the cabinet make it easy to get to all adjustment points on both sides of the trunnion.

Inconvenience is the enemy of safety. We made it easy to change between blade guard and riving knife with our tool-free blade guard quick change mechanism. Operators can remove the insert and make blade changes quickly with no tools required, minimizing disruptions to workflow. The safety bypass switch allows users to cut conductive material without activating the brake. Since the bypass has to be turned on every time the blade is started, you don’t have to remember to turn off the bypass system when you’re done.

Precise elevation changes made easy. The gas-assisted vertical elevation system is located close to the internal structure’s center of gravity, making fine-tuning smooth and easy. The elevation system operates on a vertical slide rather than on an arc providing you with repeatability and consistent alignment. Blade height is proportional to handle turns at all elevations. Mechanical adjustment points on the trunnion enable the operator to make micro adjustments, ensuring exact blade alignment at all bevel angles.

Models Available are:

• PCS175-PFA30 Professional 1.75HP 120V 60Hz 30″ Premium Fence System
• PCS175-TGP236 Professional 1.75HP 120V 60Hz 36″ Pro T-Glide Fence System
• PCS175-TGP252 Professional 1.75HP 120V 60Hz 52″ Pro T-Glide Fence System
• PCS31230-PFA30 Professional 3HP 230V 60Hz 30″ Premium Fence System
• PCS31230-TGP236 Professional 3HP 230V 60Hz 36″ Pro T-Glide Fence System
• PCS31230-TGP252 Professional 3HP 230V 60Hz 36″ Pro T-Glide Fence System

Specifications:

• Footprint: 85 1/4″ w x 33″ d x 34″ h (w/ Pro-Glide Fence System & 52″ rails)
• Cabinet footprint: 19 3/8″ w x 19 3/8″ d
• Cast iron table: 20″ w x 27″ d, 44″ w x 27″ d (w/ extension wings)
• Extension table 40 1/8″ w x 27″ d (52″ rails)
• Weights: 265 lbs (table saw only) 449 lbs (with T-Glide Fence System & 52″ rails)
• Blade: 40-tooth, professional grade, 5/8″ arbor
• Blade diameter: 10″
• Blade tilt: Left
• Max. depth of cut, blade at 0° 3 1/8″
• Max. depth of cut, blade at 45° 2 1/4″
• Max. rip, right of blade: 52″ (with optional 52″ rails)
• Max. rip, left of blade:12″
• Dado diameter: 8″ (requires a separate brake cartridge and table insert)
• Dado max. width: 13/16″
• Arbor diameter at blade: 5/8″
• Table in front of blade (max. elevation): 10 1/4″
• Dust collection port diameter: 4″
• Riving knife / splitter thickness: 0.078″ (2mm)
• Blade guard: polycarbonate, extends only 5/8″ to right of blade
• Insert: zero clearance, steel core, ABS surfaces
• Hand wheels: 7″ diameter, cast iron with chrome handle
• Belts: 2 V-ribbed belts – arbor belt is static dissipative

When we think of a Stallion, words like strength, grace, aggression, unbridled and beauty come to mind. CWI Woodworking Technologies has developed Stallion Sawing Equipment with these attributes as part of its DNA. A Stallion table saw will offer its owner a machine with impressive attributes that will allow him/her to tame any woodworking project with ease.

The CWI-T1002 Left Tilt Stallion table saw has more built in features, quality and performance than any competitor in its class. The most prominent feature a user will first notice is the deluxe Stallion fencing system. The fence itself is solid steel tubing welded to very strong angle iron to form what is referred to as a “T” style fencing system. The steel tube has on either side a t-slot anodized aluminum fence rail almost 2.5” tall. Overall the fence is very solid at just under 42” long and almost 4” wide and rides on a 2” angle iron supporting a 2 3/8” tubular steel guide for a 30” cut to the right of the saw blade. (A 50” capacity is optional)The fence can also be placed on the steel guide tube to cut 13” to the left side of the blade as well. The fence easily adjusts for accuracy with a series of screws to perfect parallelism to the blade and the “T” slot track in the cast iron table. The adjustments also will allow proper locking pressure on the guide tube. The size, strength and accuracy of the Stallion fencing system is among the best of saw fences available today and truly a unique feature in this class of table saw.

The CWI-T1002 is a true cabinet saw with a very strong 15 amp 1.5 hp motor which is wired specifically for 115 volt workshops. Most competitive table saws in this class of machine are actually “hybrid” contractor saws that look like a cabinet saw. The contractor/hybrid cabinet saw has a different trunnion design than what a true cabinet saw offers. The trunnion system or “saw works” in a contractor saw actually mounts to the underside of the saw table. All of the accuracy adjustments for truing the saw blade with a table mounted trunnion are done buy loosening the four bolts which hold the saw works in place and trying to shift them around until parallelism is achieved. The drawback of this design is the consistent need of maintenance. Those small four bolts are all that holds the weight of the trunnion and motor in place. Users typically find after prolonged use many adjustments are needed to keep accuracy of the saw in place.

The CWI-T1002 is designed differently as the trunnion system is permanently mounted to the heavy gauge metal cabinet. The cast iron table top is then bolted to the cabinet with four large bolts. To make any accuracy adjustments in your saw simply loosen the four table top bolts and shift the top so the “T” slot in the table is parallel to the saw blade. This design allows for a much heavier built trunnion as well as a more robust mounting system to the cabinet. This means accuracy maintenance after the heaviest of work loads are almost unheard of. Not only is the CWI-T1002 a cabinet mounted trunnion system but the design of the trunnion is truly unique in that the trunnion and motor slide straight up and down instead of the traditional “swing” type of saw adjustment. The Vertical Slide design allows for more robustness in the workings of the Stallions trunnion which carries the 1.5 hp motor. This saw is built strong enough to handle a larger motor but to do so would mean running the saw on 220 volt power. If more power is wanted we have other Stallion table saws to suit your needs.

Another design feature of Stallion saws is the saw blade drive system. In traditional contractor/hybrid saws a single V belt is used to drive the power to the saw blade. More powerful cabinet saws would typically use two or three V-Belts. Stallion has designed their trunnion with a single multi rib flat drive belt to transfer the power of the motor to the blade. This belt runs cooler and lasts longer and can handle stronger loads than traditional V belts. The even distribution of pressure over the wider ribbed pulley provides a uniform load distribution, is smoother running, and has better tolerance to shock as well as greater stability, which results in longer belt life.

The cast iron table top features two 12” cast iron wings for a total dimension of 27” deep by 44” wide working area. Customers can also add a home built wooden work table extension if a larger surface is wanted. For safety we not only include a very nice see through easy adjust blade guard, the Stallion also has a wrench-less quick release riving knife. The riving knife is designed to help eliminate the chance of “kick back” by traveling up and down with the saw blade height and ensuring the work piece does not “pinch” the saw blade.

The robust hand wheels feature a very strong locking knob which when tightened hold the saw blade securely in its required position. This is very handy for dado and miter operations. Another really nice feature is the ease of blade change. On most table saws the user either tries to use two saw wrenches in a very tight space or simply use a piece of scrap wood to “jam” the blade while they loosen the saw nut. The Stallion CWI-T1002 has a built in arbor lock by simply using a finger to push a spring loaded pin into a hole in the arbor flange locking it in place while you release the saw nut with wrench.

The cast iron miter gauge supplied with the Stallion is a “T” slot guide rail which slides smoothly in the two ¾” x 3/8” “T” slots on the cast iron table. Also a very nice push stick is standard with the Stallion for further safety when pushing smaller work pieces through the blade. There are very handy storage mounts too for the miter gauge, push stick and saw fence on either sides of the cabinet for use when these items are not required for certain operations. A really nice feature!

Dust collection on the Stallion table saw is uniquely designed where more attention has been placed to removal of saw dust. In the base of the saw cabinet is a traditional 4” dust connection port mounted to a clean out door. Sometimes woodworkers get a bit lazy when only making a cut or two and don’t bother to fire up the dust collector. The clean out door is removed with four small screws to allow users to dig out any leftover dust trapped within the saw. When the dust collection is in use there is also a 2.5” hose which travels from the 4” connection port up to the enclosed saw blade cavity in the saw. By encompassing the whole saw blade area in a confined space it makes easy work for the dust collector to pull the dust out before it simply flies around inside the cabinet.

Specifications:

• 15 AMP 1.5 HP 115/220 Volt Motor (Wired 115 volt)
• 10” Dia x 5/8” Bore Saw Blade (not included)
• Left Tilting Saw Blade
• 4200 RPM
• 3 1/8” Cut (90) 2 1/4” Cut (45)
• Stallion Easy Adjust Fencing System for 30” Cut Right of Blade and 13” Cut Left of Blade
• Heavy Duty 41 3/8” x 3 7/8” Steel Fence w/Anodized Aluminum Sides
• Cast Iron “T-Slot” Miter Gauge
• Robust Cabinet Mounted Vertical Slide Trunnion System
• Quick Release See Through Blade Guard
• Quick Release Riving Knife
• Multi Ribbed Flat Drive Belt
• Storage Mounts for Fence, Miter Gauge and Stock Pusher
• Huge 27” x 44” Cast Iron Work Surface with 36” Working Height
• 4” Dust Inlet Diameter
• Enclosed Saw Blade Cavity w/2.5” Dust Hose Connection
• CSA Certification
• Optional 50” Fence System Available (CWI-T1002L)
• Lockable Safety Switch
• Floor Space 44” x 61” x 43”
• Shipping Dimensions (Saw 30” x 31” x 51”) (Rail 60” x 3.5” x 3”) (Fence 44.5″ x 17″ x 6″)
• 377 Pounds Shipping Weight (3 Pieces)

The Contractor models from Sawstop (CNS) are available in three different fence versions as well as the option of cast iron extension wings instead of the standard stamped steel extension wings. When ordering your saw choose the fence system which works best for your shop and whether you want the saw to have cast iron extension wings included. It is optional to convert the CNS saws to run on 220 volt single phase power if you so choose.

A fast-acting brake stops the blade when contact is detected. The brake includes a heavy-duty spring to push a block of aluminum, called a brake pawl, into the teeth of the blade to stop the blade from spinning. The spring is held in compression by a fuse wire until contact is detected. When contact is detected, the system sends a surge of electricity through the fuse wire to burn the wire and release the spring. The spring pushes the brake pawl into the teeth of the spinning blade, and the teeth cut into the aluminum and bind, thereby stopping the blade. All this happens in about 35 milliseconds, or 1/200th of a second. At the same time, the angular momentum of the blade causes the blade to retract below the table and the power to the motor is shut off.

The standard and dado brake cartridges are single-use components that must be changed if the brake is ever activated. Changing a brake cartridge is fast and easy, no more complicated than changing the blade.

Models Available:

• CNS175-PFA30 Contractor 1.75HP 120V 60Hz 30″ Aluminum Fence System
• CNS175-TGP236 Contractor 1.75HP 120V 60Hz 36″ Pro T-Glide Fence System
• CNS175-TGP252 Contractor 1.75HP 120V 60Hz 52″ Pro T-Glide Fence System

Specifications:

• Footprint: 25 3/4″ w, 27″ d
• Cast iron table: 20″ w, 27″ d
• Extension wing (Steel x 2): 12″ w, 27″ d
• Shipping weight (approx.): 335 lbs.
• Blade: 10″ diameter, 5/8″ arbor
• Blade tilt: Left
• Maximum depth of cut: 3 1/8″
• Dado diameter: 8″
• Dado max. width: 13/16″
• Dust collection port: 4″ diameter
• Insert: Zero-clearance
• Blade guard: Polycarbonate, thin profile
• Riving knife / splitter: 2mm thick

The ICS series of saws (Industrial Cabinet Saws) are the most robust of the SawStop models at just under 700 lbs in weight. The ICS saws are mostly utilized in education or industrial applications with options of 3 HP -7.5 HP motors in various power options while using 36” or 52” cut capacity T-Glide fence systems.

A fast-acting brake stops the blade when contact is detected. The brake includes a heavy-duty spring to push a block of aluminum, called a brake pawl, into the teeth of the blade to stop the blade from spinning. The spring is held in compression by a fuse wire until contact is detected. When contact is detected, the system sends a surge of electricity through the fuse wire to burn the wire and release the spring. The spring pushes the brake pawl into the teeth of the spinning blade, and the teeth cut into the aluminum and bind, thereby stopping the blade. All this happens in about 5 milliseconds, or 1/200th of a second. At the same time, the angular momentum of the blade causes the blade to retract below the table and the power to the motor is shut off.

The optional brake cartridges are single-use components that must be changed if the brake is ever activated. Changing a brake cartridge is fast and easy, no more complicated than changing the blade.

When placing an order for these saws please choose motor size, power option and fence cutting capacity.

Models Available:

• ICS31230-36 Industrial 3HP 1ph 230V 60Hz 36″ Ind T-Glide Fence System
• ICS31230-52 Industrial 3HP 1ph 230V 60Hz 52″ Ind T-Glide Fence System
• ICS51230-36 Industrial 5HP 1ph 230V 60Hz 36″ Ind T-Glide Fence System
• ICS51230-52 Industrial 5HP 1ph 230V 60Hz 52″ Ind T-Glide Fence System
• ICS53230-36 Industrial 5HP 3ph 230V 60Hz 36″ Ind T-Glide Fence System
• ICS53230-52 Industrial 5HP 3ph 230V 60Hz 52″ Ind T-Glide Fence System

(Other Power Options Available on Special request)

Specifications:

• Footprint: 85 1/4″ w x 36 1/2″ d x 34″ h (w/fence, extension table & 52″ rails)
• Cabinet footprint: 20″ w x 25″ d
• Cast iron table: 24″ w x 30″ d, (44″ w x 30″ d w/ extension wings)
• Extension table 40″ w x 30″ d (52″ rails)
• Weights 530 lbs (table saw only) 685 lbs (with fence, 52″ rails & table)
• Blade: 60-tooth, professional grade, 5/8″ arbor
• Blade diameter: 10″
• Blade tilt: Left
• Max. depth of cut, blade at 0º: 3 1/8″
• Max. depth of cut, blade at 45º: 2 1/4″
• Max. rip, right of blade: 52 1/2″
• Max. rip, left of blade: 12 1/2″
• Dado diameter: 8″ (requires a separate brake cartridge)
• Dado max. width: 13/16″
• Arbor diameter at blade: 5/8″
• Table in front of blade (max. elevation): 11″
• Dust collection port diameter: 4″
• Riving knife / splitter thickness: 2mm
• Blade guard: polycarbonate, extends only 5/8″ to right of blade
• Insert: zero clearance, phenolic core, melamine surfaces
• Belts: 2 V-ribbed belt

Options:

• Dado Brake Cartridge
• Standard Brake Cartridge
• Dust Collection
• Sliding Tables

The SawStop Jobsite Saw Pro delivers durability, innovation and precision with a design that’s built for the worksite. The JSS Pro has the following features:

SAWSTOP’S PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

CLASS-LEADING FEATURES: 24 5/8” table depth allows a larger surface to make safe and accurate cuts from. Included Active Dust Collection Guard for class-leading dust management. One-turn elevation allows the user to raise and lower the blade in a single turn, and the Quick-Tilt adjustment tilts the blade easily and quickly to the ideal angle in 1-degree increments.

HIGH-LOW T-STYLE FENCE WITH ERGOLOCK: The updated Jobsite Saw T-Style Fence slides smooth and lock firm with one touch. Extend the On-Demand shelf for added support, and use the low fence face for safer cutting of thin work pieces.

EASY MOBILITY: Simple, intuitive foot pedal extends the mobile cart for use and collapses the cart for transport.

ONBOARD STORAGE: Keep the accessories contained and protected in the onboard storage drawer. Find the Active Dust Collection Guard, riving knife, miter gauge and more, all ready for quick use.

RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.

Specifications:

• Stowed Dimensions: 26 1/2″ L x 29″ W x 45″ H
• Class-Leading Table Depth: 24 5/8” table depth allows a larger surface to make safe and accurate cuts from
• One-Turn Elevation: Raise and lower the blade in just one turn on the handwheel
• Solid Hi-Low T-Style Fence with Ergolock: Slides easily and locks firm with the push of the innovative Ergolock. 25 1/2” rip capacity
• Active Dust Collection Blade Guard: Captures above table dust, helping to ensure a safer and cleaner workspace
• Internal Dust Collection Shroud: Designed to provide superior dust collection capabilities.
• Easy Mobility: Simple, intuitive action extends the Mobile Cart for use and collapse the cart for transport
• 1 year warranty
• Jobsite Saw PRO with Mobile Cart Assembly -15A,120V,60Hz