FencePRO contains two individual Fence Featherboards and can also be stacked using the 2 1/4″ T Bolt provided. Each FencePRO contains a 4″ Travel Slot. FencePRO EVA feathers virtually arrest kickback; something you don’t get from plastic feathers. EVA has slight pliability which combined with our patented living hinge design pinch the board against the table and absorb kickback forces immediately as the board moves backwards. EVA Feathers provide excellent infeed and outfeed control for the cleanest cut. As feather tension is applied, the feathers lay down for greater surface contact holding wood secure against the table and minimize wiggle. Even under high feather tension, wood feeds easy and smooth, yet firm.

EVA feathers dampen vibration and will not mar even the softest woods. If these aren’t enough reasons to never use a plastic feather featherboard again, here is the next major advantage: If the EVA feathers make accidental contact with a blade or router bit, they cut through and can be replaced; no violent reaction. Plastic feathers can shatter and become dangerous projectiles that can cause serious injury; and your featherboard is ruined.

And if you’re using cutters with carbide tips, they could be damaged as well. EVA is a High Density closed cell material. Our EVA Feathers are made from a unique blend ideal for woodworking and are extremely durable. Feathers are water jet cut for precision.

Feathers are Replaceable and Reversible.

FencePRO mounts to T Track and comes with Comfortable Ergonomic knobs. No other featherboard protects you, your tools and your wood like the FencePRO. If you want the ultimate in safety, performance and tool protection, get FencePRO and use in Combination with FeatherPRO. For use on Fences for Table Saws, Routers, and Band Saws.

Because of the unique design and material this feather board uses your cuts are smoother on the infeed and the outfeed with incredible kickback protection. Once you pass your workpiece between the Featherpro and your fence it becomes almost impossible to pull the workpiece back out. You’ll also dramatically reduce chatter and end up with a better cut which is what all woodworkers strive for.

If you accidentally hit your blade with this feather board it won’t shatter or explode in your face. This not only increases your safety but it also helps protect your equipment’s longevity. You can apply lots of pressure or a little pressure depending on what you’re doing EVEN WHEN working with soft woods!

You don’t need a left and a right feather board. The FeatherPro is reversible by simply flipping it over and reversing hardware. You can also use it in the vertical position, not just horizontal.

Because of the unique design and material this feather board uses your cuts are smoother on the infeed and the outfeed with incredible kickback protection. Once you pass your workpiece between the Featherpro and your fence it becomes almost impossible to pull the workpiece back out. You’ll also dramatically reduce chatter and end up with a better cut which is what all woodworkers strive for. If you accidentally hit your blade with this feather board it won’t shatter or explode in your face and if its feathers become damaged they are a simple replacement without replacing the whole jig. This not only increases your safety but it also helps protect your equipment’s longevity. You can apply lots of pressure or a little pressure depending on what you’re doing EVEN WHEN working with soft woods! You don’t need a left and a right feather board. The FeatherPro is reversible by simply flipping it over and reversing hardware. You can also use it in the vertical position, not just horizontal.

The FP3 Dual stack featherboard kit comes with sets of both light duty and heavy duty fingers, stacking pads, miter slot bars for use in standard miter slots as well as T-Bolts for use on router fences or T-Tracks. The featherboards can be used individually or combined in both vertical and horizontal uses. These Bow board are truly the most amazing safety device for tablesaws, bandsaws, router tables and shapers. They hold the workpiece from kick-back better than any other feather board available today.

Price is for two feathers

Price is for two feathers

Insert the miter cam into the miter slot, position material to the blade, apply desired tension, set GuidePRO lock for a hands free cut. Begin feed. The GuidePRO fits 3/8” x 3/4” Miter Slots, and works with Miter Slots that range from 2” to 8” (50mm to 203MM) from the blade. The comfortable formed grip of the GuidePRO allows very comfortable working pressure and use. The GuidePRO base is a detachable measuring tool featuring metric and imperial measurement. Perfect for use when squaring and measuring fence setup.

Available options are the Guide Pro Extension Kit for taller work as well as the Guide Pro Anchor Bar for adapting the Guide pro to your table saw or router table.

The GuidePRO Extension comes with a 10″ silicone feather.