Oneway Chuck Jaws – Canadian Woodworker https://www.canadianwoodworker.com Mon, 02 Nov 2026 14:53:19 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 https://www.canadianwoodworker.com/wp-content/uploads/2023/11/logo_02-100x100.png Oneway Chuck Jaws – Canadian Woodworker https://www.canadianwoodworker.com 32 32 Oneway Mini Jumbo Jaws for Oneway/Talon Chuck https://www.canadianwoodworker.com/product/oneway-mini-jumbo-jaws-for-oneway-talon-chuck/ Fri, 31 Jan 2025 14:39:41 +0000 https://www.canadianwoodworker.com/?post_type=product&p=26589 These jaws are aluminum plates machined from a solid (for greater strength). Their unique combination of slots and tapped holes for mounting the rubber grippers allows holding an infinite number of round, oval or square shapes. The buttons are hard rubber pressed over a tapered steel sleeve for superior holding.

Usage

  • Light finishing on the backs of bowls
  • External chucking on platters and picture frames

Note: Wooden false jaws may be mounted and turned for those requiring the utmost in precision finishing or for extremely large or critical applications.

]]> Oneway #2 Tower Jaws Serrated for Stronghold Chuck https://www.canadianwoodworker.com/product/oneway-2-tower-jaws-serrated-for-stronghold-chuck/ Fri, 31 Jan 2025 14:39:41 +0000 https://www.canadianwoodworker.com/?post_type=product&p=26592 Part No. 3599 – #2 Serrated Stronghold Chuck Tower Jaws

Each of these jaw sets contain the following items:

  • Jaws (4)
  • M6 x 14 (8)
]]> Oneway Talon Jumbo Jaws https://www.canadianwoodworker.com/product/oneway-talon-jumbo-jaws/ Fri, 31 Jan 2025 14:39:40 +0000 https://www.canadianwoodworker.com/?post_type=product&p=26573 These jaws are aluminum plates machined from a solid (for greater strength). Their unique combination of slots and tapped holes for mounting the rubber grippers allows holding an infinite number of round, oval or square shapes. The buttons are hard rubber pressed over a tapered steel sleeve for superior holding.

]]> Oneway Stronghold #3 Set of Jaws https://www.canadianwoodworker.com/product/oneway-stronghold-3-set-of-jaws/ Fri, 31 Jan 2025 14:39:40 +0000 https://www.canadianwoodworker.com/?post_type=product&p=26575 #3 Jaws are designed for turning producing large bowls and vases. They have been machined with Oneway Manufacturing’s patented profile jaw design. They are unparalleled in strength and holding capacity. Fits Stronghold Chuck Capacity: external 3-7/8″ to 5″, internal 4″ to 6″.

]]> Oneway Stronghold Mega Jumbo Jaws https://www.canadianwoodworker.com/product/oneway-stronghold-mega-jumbo-jaws/ Fri, 31 Jan 2025 14:39:40 +0000 https://www.canadianwoodworker.com/?post_type=product&p=26579 Part No. 2159 – Mega Jumbo Jaws For Stronghold

These jaws are aluminum plates machined from a solid (for greater strength). Their unique combination of slots and tapped holes for mounting the rubber grippers allows holding an infinite number of round, oval or square shapes. The buttons are hard rubber pressed over a tapered steel sleeve for superior holding.

Usage

  • Light finishing on the backs of bowls
  • External chucking on platters and picture frames
]]> Talon #3 Tower Jaws https://www.canadianwoodworker.com/product/talon-3-tower-jaws/ Fri, 31 Jan 2025 14:36:33 +0000 https://www.canadianwoodworker.com/?post_type=product&p=25781 Machined to a depth of 1-1/4″, Tower Jaws maximize the gripping power and strength necessary for large bowls and vases, while minimizing damage to the piece. The increased depth gives more clearance when working on the back of the piece. With their patented profiled design you no longer have to worry about getting the spigot close to the design diameter as you do with traditional serrated jaws. The top of the internal profile is dovetailed with no serrations. This part of the jaws is specifically designed for use in non-marking situations like when you want to leave the tenon on the bottom of a bowl as a feature. This Talon version also fits the original Oneway Scrolling Chuck.

  • External (compression) chucking capacity: 3-3/8″ to 4-1/2″
  • Internal (expansion) chucking capacity: 3-7/8″ to 5-1/8″
]]> Talon #1 Set of Jaws https://www.canadianwoodworker.com/product/talon-1-set-of-jaws/ Fri, 31 Jan 2025 14:36:32 +0000 https://www.canadianwoodworker.com/?post_type=product&p=25776 Step Jaws are specifically designed for turning small items. The steps are used to expand into a recess enabling you to turn the outside of the piece with added confidence. The outside surface of the jaws is serrated to grip the work piece with minimal damage

]]> Oneway #3 Jaws https://www.canadianwoodworker.com/product/oneway-3-jaws/ Fri, 31 Jan 2025 14:36:32 +0000 https://www.canadianwoodworker.com/?post_type=product&p=25777 These jaws have the mass and size necessary for large bowls and vases. The profiled jaws provide maximum gripping power with minimal damage to the piece.

]]> Stronghold #3 Tower Jaws https://www.canadianwoodworker.com/product/stronghold-3-tower-jaws/ Fri, 31 Jan 2025 14:36:32 +0000 https://www.canadianwoodworker.com/?post_type=product&p=25779 Machined to a depth of 1-1/4″, Tower Jaws maximize the gripping power and strength necessary for large bowls and vases, while minimizing damage to the piece. The increased depth gives more clearance when working on the back of the piece. With their patented profiled design you no longer have to worry about getting the spigot close to the design diameter as you do with traditional serrated jaws. The top of the internal profile is dovetailed with no serrations. This part of the jaws is specifically designed for use in non-marking situations like when you want to leave the tenon on the bottom of a bowl as a feature.

  • External (compression) chucking capacity: 3-5/8″ to 5″
  • Internal (expansion) chucking capacity: 4-3/8″ to 5-7/8″
]]> Talon #2 Tower Jaws https://www.canadianwoodworker.com/product/talon-2-tower-jaws/ Fri, 31 Jan 2025 14:36:32 +0000 https://www.canadianwoodworker.com/?post_type=product&p=25780 Machined to a depth of 1-1/4″, Tower Jaws maximize the gripping power and strength necessary for large bowls and vases, while minimizing damage to the piece. The increased depth gives more clearance when working on the back of the piece. With their patented profiled design you no longer have to worry about getting the spigot close to the design diameter as you do with traditional serrated jaws. The top of the internal profile is dovetailed with no serrations. This part of the jaws is specifically designed for use in non-marking situations like when you want to leave the tenon on the bottom of a bowl as a feature. This Talon version also fits the original Oneway Scrolling Chuck.

  • External (compression) chucking capacity: 1-1/2″ to 2-5/8″
  • Internal (expansion) chucking capacity: 2″ to 3-3/8″
]]>