Products

Shop

Tormek Moulding Knife Jig

  • SVP-80 Tormek Moulding Knife Jig
  • SVP-80_in use_800x800
  • SVP-80 Tormek Moulding Knife Jig
  • SVP-80_in use_800x800

Tormek Moulding Knife Jig

$301.95

Out of stock

The SVP-80 Moulding Knife Attachment flat-grinds all types of moulding knives, with 24, 30 and 36 mm spacing between guide holes.

This jig is easy to use and the lumber gets a smooth surface with sharp blades. You can also sharpen profiled paint scrapers to maximum sharpness.

Why SVP-80 Moulding Knife Attachment?

  • Sharpens all kinds of profiles.
  • Easy to set up and use.
  • Patented design provides even flat-grind over the entire moulding knife.
  • Can be used to sharpen profiled paint scrapers to maximum sharpness.
  • Works with both Tormek T-4 and Tormek T-8, as well as older models.
Sharpens your moulding knives with ease

Since the sharpening is done on the flat backside of the moulding knife, this jig can handle all kinds of profiles with a maximum width of 100 mm (3 7/8″). The frame includes two sliding strips that reduce friction and facilitate sharpening. You maintain good contact with the blade and you can feel when it touches the grinding wheel. The SVP-80 Moulding Knife Attachment also allows you to sharpen profiled paint scrapers to maximum sharpness.

Easy, flexible mounting

The SVP-80 Moulding Knife Attachment has a steel plate with a magnetic insert with a number of holes. You can easily see which holes correspond to the holes in your moulding knife and insert the clamping pins supplied into the corresponding holes on the magnet. This allows you to easily and freely mount your various moulding knives for steady sharpening.

You may also like…